What is the pure electric range of the BYD Tang?

What are the manifestations of excessive car power?

Excessive car power is mainly manifested in the following two aspects: 1. The vehicle is prone to losing control, and even a slightly deeper press on the accelerator can be intimidating, with the ESP and ABS lights constantly flashing. While this is largely related to the vehicle, it is even more related to the driver. For example, it's possible that the rear wheels start to slip as soon as the accelerator is pressed, indicating that the power is excessive for the tires. However, if the driver is skilled enough, they might enjoy this drifting characteristic. So the key is whether you can control the excess power effectively. 2. Excessive power makes the car's power so great that the vehicle completely loses balance, leaving the driver feeling nothing but the power. Some drivers may enjoy this sensation, similar to the thrill of free solo rock climbing.

19

2

Share

What are the methods to reset the tire pressure light on a Forester?

Subaru Forester's tire pressure light reset method involves pressing and holding the tire pressure button located in the recess below the center console screen for a few seconds to perform the tire pressure reset. Tire Pressure Reset: Tire pressure reset is an operation to reset the tire pressure monitoring system after addressing a tire pressure fault. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault light on the dashboard will turn off, completing the tire pressure reset. What to Do if Tire Pressure is Low: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system. If a puncture is found upon inspection, promptly drive to a tire shop for repair and then reinflate. If the tire pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to inspect the wheel rim and consider replacement.

3

4

Share

How to Turn Off the Vehicle Auto Start-Stop System?

Generally, vehicles equipped with an auto start-stop system have this function enabled by default. The owner can directly press the auto start-stop button (usually a circular arrow containing the letter 'A'), and the dashboard will indicate that the auto start-stop system is turned off. If you wish to use this function again, simply press the button to reactivate it. Frequent switching of the auto start-stop system has drawbacks. Below are the disadvantages of frequently turning the auto start-stop system on and off: 1. Higher maintenance costs for the battery and starter: Frequent engine starts and stops can damage related components, such as the starter and battery. 2. Poor user experience: Noise and vibrations are more noticeable when the auto start-stop system is activated. 3. Increased fuel consumption in traffic jams: During severe traffic congestion, the engine remains off for extended periods, causing the combustion chamber temperature to drop. Unburned hydrocarbons and paraffin can form carbon deposits on the cylinder walls. If the fuel quality is poor, the situation worsens. Carbon deposits lead to higher fuel consumption and weaker engine performance. Ironically, the auto start-stop function, designed to reduce fuel consumption, may instead increase it.

18

3

Share

Where to Find the Manufacturing Date of a Car?

The manufacturing date of a car is marked on the manufacturing plate, which is located in the engine compartment and on the side of the driver's door. Here is some information about the manufacturing plate: 1. The manufacturing plate contains the vehicle's VIN code, which is like a person's ID number and serves as the car's unique identification number—also known as the Vehicle Identification Number (VIN) or chassis number. 2. The 17-digit number on the manufacturing plate typically includes information such as the manufacturing plant, country of origin, vehicle type, and vehicle characteristics. 3. To determine the car's manufacturing date: count from the left, and the 10th digit or letter represents the production year of the car.

19

2

Share

What causes the engine vibration in an Audi A6L when cold?

When starting the engine cold, the idle speed is unstable, leading to generator failure. The specific reasons are as follows: 1. Intake manifold or various valve leaks: When air, gasoline vapor, or combustion exhaust that should not enter the intake manifold gets in, it causes the air-fuel mixture to become too rich or too lean, resulting in abnormal engine combustion. If the leak affects only individual cylinders, the engine will experience more severe vibrations, especially impacting cold idle conditions. 2. Excessive carbon buildup in the throttle body and intake passages: Too much carbon deposits and dirt in the throttle body and surrounding intake passages change the cross-sectional area of the air passage, preventing the control unit from precisely controlling idle air intake. This leads to an overly rich or lean mixture and abnormal combustion. 3. Faulty idle air control components: Malfunctions in idle air control components result in inaccurate idle air control. 4. Inaccurate air intake measurement: The control unit receives incorrect signals and issues wrong commands, causing the engine's idle air intake control to be inaccurate. This results in abnormal combustion and is an indirect cause of unstable idle speed.

15

3

Share

What are the exterior dimensions of the Toyota Crown?

The Toyota Crown comes with two wheel sizes: one is 17 inches and the other is 18 inches, both made of aluminum alloy. Below is some information about the Toyota Crown: 1. The Toyota Crown was first launched in Japan on January 1, 1955, and is now in its 13th generation. Over these 50 years, the Crown has generally maintained a 4-5 year cycle for each generation. 2. The domestically produced Crown is available in three engine displacements: V6 2.5L, 3.0L, and V8 4.3L. It is equipped with the Dual VVT-i system, which intelligently adjusts the timing of both intake and exhaust valves, significantly improving engine intake efficiency, fuel economy, and power performance, resulting in stronger horsepower.

5

4

Share

What is the pure electric range of the BYD Tang?

What are the manifestations of excessive car power?

What are the methods to reset the tire pressure light on a Forester?

How to Turn Off the Vehicle Auto Start-Stop System?

Where to Find the Manufacturing Date of a Car?

What causes the engine vibration in an Audi A6L when cold?

What are the exterior dimensions of the Toyota Crown?

What is the purpose of the protrusion under the Leiling accelerator pedal?

What does trouble code C0041 mean?

What tires are used on the Baojun 530?

Where is the VIN located on a sedan?