···
Log in / Register

What is the penalty for traffic violation code 1039?

6Answers
DiIsaac
09/04/2025, 01:20:41 AM

Violation code 1039 refers to a motor vehicle being parked or temporarily stopped in violation of regulations, with the driver not present on site or refusing to leave immediately even if present, thereby obstructing the passage of other vehicles and pedestrians. This offense incurs a 0-point deduction, a fine, and an order for correction. Traffic violation codes: Traffic violation codes consist of four digits, categorized according to the principles outlined in traffic laws. The sequence from left to right is as follows: the first digit represents the behavior classification code, the second digit represents the penalty point classification code, and the third and fourth digits represent the sequential code. The first digit (behavior classification code) indicates the category of the violation within the Road Traffic Safety Law. The second digit (penalty point classification code) indicates the penalty points associated with the violation. The third and fourth digits (sequential code) indicate the order of the violation within the same behavior classification. Behavior codes: The first digit (behavior code) ranges from 1 to 5, as well as 7 and 8. 1 represents motor vehicle passage, 2 represents non-motor vehicle passage, 3 represents pedestrian or passenger passage, 4 represents highway passage, 5 represents other provisions, 7 represents the implementation rules of provinces, autonomous regions, or municipalities directly under the central government, and 8 represents local regulations of cities (prefectures, autonomous prefectures, or leagues). Penalty point classification codes: The second digit (penalty point classification code) includes 0, 1, 2, 3, 6, and 7. 0 indicates no penalty points, 1 indicates 1 point, 2 indicates 2 points, 3 indicates 3 points, 6 indicates 6 points, and 7 indicates 12 points. Total number and classification of codes: The original traffic violation code table issued by the Ministry of Public Security includes 337 types of violations, categorized as follows: 175 for motor vehicle passage, 55 for non-motor vehicle passage, 30 for pedestrian or passenger passage, 28 for highway passage, and 49 for other provisions.

Was this review help?
116
Share
Journey
09/16/2025, 02:17:57 AM

I made this mistake the last time I was driving. Violation code 1039 mainly refers to speeding, typically exceeding the speed limit by 20% to 50%. For example, if the speed limit on the highway is 120 km/h, driving above 144 km/h becomes dangerous. The fine is usually around 200 yuan, plus 6 penalty points—I was fined for this before. Speeding is no trivial matter; it increases braking distance, making rear-end collisions more likely in sudden situations. I almost had an accident because of it. For safety, I now use navigation apps to remind me of speed limits, and since forming this habit, I've hardly made the mistake again. I recommend checking road signs more often, especially on unfamiliar roads, and not rushing for time.

Was this review help?
3
Share
Expand All
ClaraAnn
10/30/2025, 02:52:58 AM

As a seasoned driver who's often on the road, I'm very familiar with violation code 1039. It refers to speeding between 20% to 50% over the speed limit. The penalty is usually a 200 yuan fine plus 6 demerit points on the driver's license. Accumulating too many points can affect driving privileges. I've seen many novices overlook this, only to find that while the fine is minor, the points deduction requires attending remedial classes and tests – time-consuming and exhausting. Speeding also increases fuel consumption and vehicle wear, making it even more costly in the long run. In daily driving, I use cruise control to maintain speed or monitor the dashboard to keep steady. Remember, arriving home safely is far more important than driving fast.

Was this review help?
9
Share
Expand All
KinsleyMarie
12/13/2025, 02:01:16 AM

When I first got my driver's license, I was also curious about what violation code 1039 meant. After researching, I found out it represents speeding between 20%-50% over the limit. The specific penalty is about 200 yuan and 6 demerit points. It doesn't sound too serious, but accumulated points could lead to license suspension, especially since young people tend to overlook this when they enjoy speeding. I once got caught by a speed camera driving too fast in the city, and now I've learned to use speed limit reminders more often. On a related note, speeding increases tire wear and fuel consumption, which means spending more money unnecessarily. I recommend regularly checking traffic violation apps and dealing with any violations promptly to avoid compounding penalties.

Was this review help?
1
Share
Expand All
OAlivia
02/02/2026, 03:05:55 AM

Violation code 1039 refers to speeding exceeding the speed limit by 20%-50%. The standard penalty is a 200 yuan fine plus 6 demerit points, though this amount may vary slightly by region—for instance, it could be slightly higher in major cities. I've paid attention to the details; it might also lead to increased insurance premiums and complicate vehicle inspections. My daily habit is to check the speed limit alerts on traffic condition apps before driving to avoid unintentional speeding in blind spots. Moreover, speeding significantly raises the risk of accidents, with data showing that accident rates double when driving too fast. Maintaining a reasonable speed not only saves you from fines but also protects yourself and others.

Was this review help?
14
Share
Expand All
CarmenFitz
04/28/2026, 01:00:49 PM

I believe the essence of traffic violation code 1039 is exceeding the speed limit by over 20% but not exceeding 50%. The typical penalty starts at 200 yuan plus 6 demerit points. When I encounter this, I remind myself it's not just about the money—speeding severely affects handling stability and increases skidding risks, especially in rain or snow. I often use my vehicle's adaptive cruise control to avoid mistakes or simply memorize speed limits on familiar routes. Such violations can also easily trigger road rage and increase driving stress, so developing a habit of maintaining steady speeds is most practical.

Was this review help?
3
Share
Expand All
More Q&A

What to Do About Oil Leakage in Buick Excelle Engine?

Buick Excelle engine oil leakage can be addressed by: 1. Identifying the cause of the issue before proceeding with repairs; 2. Replacing any damaged components; 3. Tightening the nuts. The Buick Excelle 2019 is a compact 4-door, 5-seater sedan with body dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. It is equipped with a 1.0T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 92 kW and a maximum torque of 170 Nm. The vehicle features front-wheel drive, with a front McPherson independent suspension and a rear multi-link independent suspension.
111
Share

How to Set Up Automatic Door Locking When Leaving the Vehicle for the Tiguan L?

Tiguan L does not have the automatic door locking feature when leaving the vehicle, so it cannot be set up by yourself. You need to visit a 4S shop to have the program updated. Apart from using the key to lock the doors, the Tiguan L can also be locked by touching the horizontal groove on the door handle.
113
Share

What Are the Solutions for Mistaking the Accelerator for the Brake?

Solutions for mistaking the accelerator for the brake include: 1. Keep the heel on the ground and use the toes to press the brake or accelerator; 2. Place the foot at the same level as the brake; 3. Position the heel below the brake, press the brake straight down, and when pressing the accelerator, keep the heel stationary while tilting the toes to press the accelerator; 4. Keep the foot on the brake rather than the accelerator, so that in an emergency, pressing down directly can avoid panic-induced errors. The positions of the accelerator and brake are as follows: the accelerator is located on the far right, while the brake is in the middle. The accelerator is the car's speed control device, used to regulate speed, while the brake is the vehicle's stopping or deceleration mechanism.
101
Share

How to Turn on the Air Conditioning in a Volkswagen Bora?

The method to turn on the air conditioning in a Volkswagen Bora is as follows: 1. Press the AC button in the air conditioning control area to activate the air conditioning compressor for cooling; 2. The left knob in the air conditioning control area is for temperature adjustment, turning it clockwise increases the temperature, while turning it counterclockwise decreases the temperature; 3. The right knob in the air conditioning control area is for adjusting the air vent positions, including defrosting the front windshield; 4. The middle knob in the air conditioning control area is for adjusting the air flow volume. The body dimensions of the Volkswagen Bora are: length 4663mm, width 1815mm, height 1462mm, wheelbase 2688mm, fuel tank capacity 50l, trunk capacity 506l, and curb weight 1320kg.
103
Share

How to Activate the Automatic Locking Function?

To activate the automatic locking function, follow these steps: Shift the gear to P position, turn the key to the ON position, ensure all four doors are closed, press and hold the lock button for 6 seconds until the hazard warning lights on the instrument panel flash twice, indicating the automatic locking activation is complete. The purpose of the automatic locking function is anti-theft, allowing the doors to lock quickly after driving, which provides a certain level of security. The automatic locking function, also known as speed-sensing auto lock, is an electronic device that automatically presses the lock button on the doors when the vehicle reaches a preset speed, preventing accidental opening of the doors. It serves as a protective measure, especially for children inside the car, by preventing young passengers from opening the door handles while the vehicle is in motion.
113
Share

Do You Need to Stop the Car to Switch Driving Modes?

Switching driving modes does not require stopping the car; it can be done directly while driving. Driving modes adjust throttle response and shift timing through various settings to match the driver's preferred style. Car driving modes are categorized into: 1. Normal Mode: Maintains standard power output for better fuel efficiency; 2. Sport Mode: Activates higher engine RPMs, ensuring sufficient torque for quick acceleration and deceleration; 3. Eco Mode: Optimizes fuel injection and shift patterns for minimal fuel consumption.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.