···
Log in / Register

What is the original tire model of the Beijing BJ40?

3 Answers
VonAyla
07/29/25 2:57pm
The tire model of the Beijing BJ40 is 265/65R17. The first number, 265, indicates that the tire width is 265mm. The number 65 represents the aspect ratio of the tire's cross-section at 65%, meaning the section height is 65% of the width. The letter R stands for radial tire, and 17 indicates the rim diameter is 17 inches. The Beijing BJ40 has a top speed of 160km/h, accelerates from 0-100km/h in 4.2 seconds, and has a fuel consumption of 5.6L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as standard rim 5.00F.
Was this review help?
10
2
Share
Aubree
08/13/25 7:32am
The standard factory tires for the Beijing BJ40 are generally 265/70 R16 all-terrain tires. Based on my experience with many SUV configurations, this size indicates a tread width of 265 mm, an aspect ratio of 70%, and compatibility with 16-inch rims. The factory usually equips them with brands like Giti, designed to balance on-road and light off-road performance, offering stable fuel consumption but slightly higher noise at high speeds. As an owner, it's essential to regularly check tire pressure (recommended 2.2-2.5 bar) to prevent excessive wear that could affect handling safety. The tire choice for the BJ40 directly impacts vehicle performance—the factory configuration is sufficient for most daily road conditions. However, if frequently driving on mud or rocks, upgrading to more suitable AT tires is advised to extend service life. During maintenance, monitor wear indicators and inspect/replace tires approximately every 60,000 kilometers.
Was this review help?
3
2
Share
Expand All
Silva
10/11/25 5:36am
I've been driving the BJ40 for several years, which came with 265/70 R16 tires from the Giti brand. These tires perform well on paved roads with strong grip but are not very wear-resistant. I feel some bumpiness on uneven roads. Maintenance is simple; I make it a habit to check the tire pressure monthly, keeping it around 2.3 bar. For the average car owner, they are sufficient for weekend outings and city commuting, with good fuel efficiency. If considering a replacement, I would recommend high-quality tires of the same size and advise against unnecessary upgrades to avoid wasting money. Over long-term use, the original tires have proven reliable, but don't overlook regular adjustments.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

How often should the brake fluid in a Magotan be changed?

The brake fluid in a Magotan should be changed every 40,000 kilometers. It is crucial to replace the brake fluid promptly when it reaches the maintenance interval, and it is recommended to follow the manufacturer's prescribed maintenance schedule. Brake fluid, also known as automotive brake fluid, was initially used in early cars with mechanical drum brakes. With the advancement of hydraulic technology, safe and reliable hydraulic braking systems have been widely adopted in vehicles. The Magotan is a model under FAW-Volkswagen, with body dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, and a wheelbase of 2812mm. In terms of power, the Magotan is equipped with a 1.8TSI engine, which represents the new generation of engines from Volkswagen in Germany. This engine incorporates the most advanced engine technology currently available internationally and leads the development trend of gasoline engines. The 6-speed Tiptronic automatic manual transmission forms a perfect match with the 1.8TSI engine.
1
1
Share

What are the symptoms of a faulty onboard computer?

The symptoms of a faulty onboard computer are as follows: Dashboard: The dashboard displays incorrectly or appears dim. Computer screen: The onboard computer screen goes black. Ignition: The dashboard does not display or the car fails to start even when there is power. Doors won't open: The onboard computer is typically used to calculate instantaneous consumption, mileage, temperature, average speed, average consumption, or to set maintenance reminders and alert the driver to take breaks. The causes of a faulty onboard computer are as follows: Components: In water-damaged vehicles, the computer board may corrode, leading to broken or shorted component pins or damaged components. Burnout: Overvoltage from the charger during charging, reverse polarity, turning the key while charging, or loose battery connections can cause the alternator to directly power the computer board, resulting in burnout.
3
5
Share

Where is the JMC Transit produced?

JMC's full name is Jiangxi Isuzu, a joint venture established by introducing technology from Japan's Isuzu Motors. Here are the specific details: 1. Introduction: The JMC Transit is the first independently developed European-style light commercial vehicle under the JMC brand. It is a cost-effective, reliable, and durable European-style multi-purpose commercial vehicle, upgraded based on the JMC Ford Classic Transit. 2. Exterior: The JMC Transit features a stylish and dynamic design, offering flexible and convenient handling, continuous powerful performance, and comprehensive safety configurations, delivering a brand-new experience of "extra capacity, extra speed, extra quality, and extra savings." 3. Space: The JMC Transit boasts a super-large cargo space of 8.4m³, equipped with 180° double-opening rear doors and foldable middle-row seats, ensuring convenience for boarding, alighting, and cargo handling.
15
5
Share

What Causes Unstable RPM in a Sagitar Manual Transmission?

Sagitar manual transmission RPM instability may be caused by engine ECU programming and throttle response delay. Below are more details about RPM instability: 1. The electronic throttle is controlled by an idle speed motor with two position sensors. When the throttle pedal sensor receives a signal, the ECU controls the idle motor to open the throttle, with position sensors determining its position. When values from other vehicle sensors change, the ECU automatically adjusts throttle position. However, due to the electronic throttle's gradual deceleration program and inherent delay, RPM will temporarily rise when the clutch is depressed due to load disconnection. 2. During neutral coasting, unstable RPM with rhythmic needle fluctuations indicates ECU programming adjustments to the throttle. This relates to ECU programming - when vehicle speed signals exist without throttle pedal input, the engine ECU defaults to throttle compensation to address acceleration delay issues.
10
5
Share

What brand is the horn of the Tiggo 8?

The horn of the Tiggo 8 is from the Wuhu Sound brand. Below is some knowledge about car horns. Horn maintenance: Regularly keep the exterior of the horn clean and ensure all wiring connections are secure. Frequently check and tighten the fixing screws of the horn and bracket to ensure reliable grounding. The method of fixing the horn greatly affects its sound. To ensure the horn produces normal sound, it should not be rigidly mounted. Instead, it should be fixed on a buffer bracket, meaning that leaf springs or rubber pads should be installed between the horn and the fixing bracket. Horn classification: Car horns can be divided into two types based on sound power: air horns and electric horns. By shape, they are categorized into cylindrical, spiral, and disc types. Based on frequency, they are classified into high-pitch and low-pitch horns.
10
2
Share

What are the items included in car detailing?

Car detailing projects are mainly divided into interior, exterior, tires, and car washing, all of which fall under car detailing. This includes detailing the dashboard, ceiling, carpets, floor mats, seats, seat covers, sunshades, vacuuming, cleaning, and protection of door panels; as well as steam sterilization, deodorization of air vents, and interior air purification; engine detailing involves cleaning and degreasing the engine, applying gloss protectants, refurbishment, and cleaning of the three filters, which refer to the fuel filter, oil filter, and air filter. Generally, professional car detailing treats the entire vehicle from the body to the interior (carpets, leather, velvet, dashboard, audio system, headliner, air vents, gear shift area, etc.), engine (without disassembly for cleaning), rims, chassis, bumpers, fuel system, etc., through dozens of processes, transforming an old car into a new one.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.