···
Log in / Register

What is the original tire model for the 2012 Ford Focus?

3 Answers
Rich
07/29/25 3:32pm
The 2012 Ford Focus hatchback comes with 215/50R17 tires, while the sedan version is equipped with 205/60R16 tires. Below is a detailed introduction to car tire specifications: 1. Specification representation: Tires are crucial components of a car, and they come in various specifications and models, each suitable for different vehicle types. The specification model is usually marked on the sidewall of the tire as a series of alphanumeric characters, representing the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. 2. Speed rating: Based on the maximum speed they can withstand, tires can be classified into different speed ratings from A to Z, with the A category further divided into eight levels from A1 to A8. The later the letter representing the tire's speed rating, the better the tire's performance.
Was this review help?
6
2
Share
LeBenjamin
08/14/25 9:09am
I still remember my 2012 Ford Focus, which originally came with tires sized 205/55 R16 91V. This size is perfect for city driving. The tire width is 205 mm, the aspect ratio is 55%, and the wheel diameter is 16 inches, with a speed and load index of 91V. It performed quite stably and had decent fuel efficiency. If you need to replace the tires, I recommend sticking to the same size. Never switch to a different size just to save money, as it could affect the suspension and braking performance. I changed mine once, opting for the original Michelin model, which significantly reduced noise and improved comfort. Also, driving habits impact tire lifespan—slow down when going over potholes, and regularly checking tire pressure can extend their service life. In short, knowing the original tire specifications gives you peace of mind while driving.
Was this review help?
7
4
Share
Expand All
StTaylor
10/12/25 2:25am
I've been driving for over a decade, and my 2012 Focus originally came with 205/55 R16 tires. This size is quite cleverly designed, balancing width and aspect ratio for both handling and economy. When replacing tires, be careful not to change the size too much - switching to something like 215/50 R17 might increase fuel consumption. The original 91V load index ensures safe carrying capacity. If you notice excessive tire noise or poor grip while driving, it could mean the wrong size is installed or the tires are severely worn. Let me share some tire maintenance tips: check tread depth during every car wash - replace if it's below 1.6mm. Maintaining tire pressure between 2.2-2.5 bar helps prevent premature wear, saving money and being eco-friendly. Remember, the original size matches the vehicle's design best.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How to Replace the Battery in a Volkswagen T-Roc Car Key?

Pull out the mechanical key by releasing the clip at the end of the key, then stand the key upright and use a screwdriver to pry it open. After separating the casing, remove the old battery directly and observe the battery type to determine the battery model. Replace with a new battery and secure the device in reverse order. Improper battery replacement may damage the car key. Before replacing the battery, check the battery model in advance. When selecting a battery, ensure the size, specifications, and rated voltage match those of the old battery.
19
4
Share

How to Turn On the Rearview Mirror Heating in a Grand Cherokee?

First, start the car and begin driving smoothly. After pressing the button, a small yellow light will illuminate, indicating that both the rearview mirror and rear window heating are activated. The heating will automatically turn off after approximately 10-15 minutes. An electric heating element is installed inside the lenses of both side rearview mirrors. When the rearview mirror heating function is turned on, the heating element will quickly warm up to a set temperature. The rearview mirror heating function refers to the ability of the rearview mirrors to be heated via electric wires embedded behind the lenses when driving in rainy, snowy, or foggy weather conditions.
19
1
Share

What to do if the car door is slightly dented?

As long as the paint on the dented area of the car door is not peeling or chipped, it can be repaired with professional tools without the need for panel beating and repainting. You can purchase a suction bridge-type repair device online. This device uses suction cups to pull out the dented area, with larger suction cups used for bigger dents. You can also buy a leveling pen to flatten the dent by tapping. This method is suitable for car doors with smaller dents. If the car door is severely dented and cannot be repaired, it will have to be replaced. If there is an auto parts store nearby, you can go directly to purchase a new one and then take it to a repair shop. Take protective measures to prevent further dents. Put a protective cover on the car door to prevent it from hitting walls or other sharp objects when opening, which could cause dents.
17
4
Share

How to deal with driving without a license and not wearing a seat belt?

Driving without a license will result in a fine according to relevant regulations. The following is an introduction to the driver's license: 1. Introduction: A driver's license (full name: motor vehicle driver's license), also known as a "driving license," is a document issued by the government traffic department to certify that a person is qualified to drive, usually in the form of a card. 2. Application: Only after the driver has completed study, training, and assessment can the traffic police department of the public security bureau issue a qualified driver's license. 3. License renewal period: If the motor vehicle driver has not accumulated 12 penalty points in any scoring period during the six-year validity period of the motor vehicle driver's license, the license can be renewed for a ten-year validity period; if the driver has not accumulated 12 penalty points in any scoring period during the ten-year validity period, the license can be renewed for a long-term valid motor vehicle driver's license.
7
0
Share

What are the effects of tire slippage with a burnt smell?

Tire slippage with a burnt smell does not have a significant impact, but it is important to pay attention to tire maintenance. Below is an introduction to tires: 1. Introduction: Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. They are usually installed on metal rims to support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. 2. Performance: Tires are often used under complex and demanding conditions. During operation, they endure various deformations, loads, forces, and high and low temperatures. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning performance. Additionally, they require high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, highlighting the significant role of tires in rubber usage. 3. Specifications: Specifications are the geometric parameters and physical performance indicators of tires. Tire specifications are commonly represented by a set of numbers, where the first number indicates the tire section width and the second number indicates the rim diameter, both measured in inches.
11
0
Share

How to Install an Aluminum Alloy Police Badge?

Aluminum alloy police badges can be installed depending on their size. Larger ones can be affixed using epoxy resin. Below is an introduction to vehicle modifications: 1. Introduction: Vehicle modification refers to altering the external appearance, interior design, and mechanical performance of a factory-produced vehicle according to the owner's needs, primarily including body modifications and performance upgrades. 2. Brakes: There are multiple methods to upgrade the braking system, such as installing larger brake discs, multi-piston brake calipers, and high-performance, heat-resistant brake pads. Additionally, higher-grade brake fluid or metal high-pressure brake lines can be installed. 3. Suspension: Suspension system modifications can generally be categorized into replacing shock absorbers, reinforcing suspension structural components, and installing stabilizer bars. Among these, shock absorber replacement is the most impactful and commonly modified component. Upgrading shock absorbers typically involves installing units with stiffer damping, higher quality, and better compatibility with springs.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.