What is the optimal angle for adjusting the exterior rearview mirrors?

How to Most Accurately Align the Shoulder Line in Subject 2?

First, to align the line correctly, you must adjust to a proper sitting posture. The seat height should ensure that your wrists can just rest on the 12 o'clock position of the steering wheel, which is the most suitable height. During the test, make it a habit to glance at the position of your shoulder with your peripheral vision. When your shoulder is roughly aligned with the standard line, the line can basically be aligned.

2

5

Share

Why does the Sagitar's RPM increase but the speed doesn't rise?

Sagitar's RPM increases but the speed doesn't rise, which may be due to problems with the clutch or transmission, preventing the engine's power from being transmitted to the wheels. Here is an analysis of the reasons why the Sagitar's RPM increases but the speed doesn't rise: 1. The engine's power is first transmitted to the clutch. If the clutch plate is severely worn or the clutch pressure plate spring is damaged, it can cause incomplete power output, resulting in a mismatch between the engine's power and the output power. 2. If the transmission is not engaged in the corresponding gear, for example, the gear lever is in the 5th gear position, but the transmission gears are only engaged in the 2nd gear position, it can also cause the RPM to increase without a corresponding rise in speed. This is commonly referred to as gear misalignment, and such problems are often accompanied by the inability to engage reverse gear. 3. Check if the automatic transmission is faulty: Move the gear selector to different positions and drive the car. If the engine RPM suddenly increases when the automatic transmission shifts to a certain gear, but the speed doesn't increase accordingly, it indicates that the gear is slipping. The more easily the engine RPM increases during slipping, the more severe the slipping is.

13

1

Share

How to Solve the Oil Burning Issue in DS5?

For older vehicles, using engine oil with higher viscosity is also an option. Oil burning refers to the situation where engine oil enters the combustion chamber of the engine. The maintenance cycle of a car is determined based on its normal usage conditions. It is advisable to shorten the maintenance cycle and the prescribed mileage according to the actual situation, and also try to avoid prolonged high-speed driving.

12

1

Share

What are the steps to drive a C1 manual transmission car?

After starting the car, press the clutch pedal all the way down with your left foot to fully disengage the clutch. Shift the transmission into first gear. For most models, first gear is located in the front-left position. The shifting action should be accurate and swift. Depending on the car model, press or lift the electronic parking brake button. Continue pressing the clutch pedal with your left foot and press the accelerator pedal with the tip of your right foot. Once the car starts moving smoothly, you can repeat the process of pressing the clutch, shifting gears, and pressing the accelerator to complete upshifting.

11

3

Share

How to Press the Buttons in Subject Three?

First, walk to the rear seat on the driver's side and press the first button, then proceed to the right rear and press the second button. After that, move forward to the front passenger seat and press the third button. All three buttons are located on the exterior. When pressing the buttons on the car, avoid pressing them too briefly, as the system may deem it invalid. It's best to hold each button for three seconds.

1

0

Share

What do main road vehicles and auxiliary road vehicles mean?

Main road vehicles refer to motor vehicles traveling on the main road, while auxiliary road vehicles refer to motor vehicles traveling on the auxiliary road. The differences between main roads and auxiliary roads are as follows: Main roads are exclusively for motor vehicles, whereas auxiliary roads are mixed-use for motor vehicles, non-motor vehicles, and pedestrians. Another difference is speed limits: auxiliary roads have a speed limit of no more than 60 km/h, while main roads can have speed limits of 80 km/h or higher. The specific distinctions between main roads and auxiliary roads are as follows: 1. Different functions: When there is too much traffic on the main road, causing high traffic pressure, some vehicles can first travel on the auxiliary road to alleviate the traffic pressure on the main road. 2. Different specifications: For one-way motor vehicle lanes with physical separation from non-motor vehicle lanes, the width of the motor vehicle lane should not be less than 7.5m; for one-way motor vehicle lanes with marked separation from non-motor vehicle lanes, the width of the auxiliary road should not be less than 8.5m; when both motor vehicle and non-motor vehicle traffic volumes are high, the width of the auxiliary road can be 12~13m. 3. Different quantities: Auxiliary roads in ground-level expressways should be set on one or both sides of the main road; in elevated roads, they should be set on the ground level below the elevated road; in urban areas, they should be continuously set. For auxiliary roads of expressways located in suburban areas, they can be set continuously or intermittently.

7

1

Share

What is the optimal angle for adjusting the exterior rearview mirrors?

How to Most Accurately Align the Shoulder Line in Subject 2?

Why does the Sagitar's RPM increase but the speed doesn't rise?

How to Solve the Oil Burning Issue in DS5?

What are the steps to drive a C1 manual transmission car?

How to Press the Buttons in Subject Three?

What do main road vehicles and auxiliary road vehicles mean?

What to Do When Fogging Occurs with AC On?

What are the penalties for not wearing a seat belt as required?

What Are the Types of Lubricating Oil?

How to Replace the Oil Filter on a Verna?