What is the oil specification for the Teana V6?

1 Answers
DiCharlotte
07/25/25 7:06am
Teana V6 oil specification is fully synthetic 5W30, and 4.5 liters of oil should be added. The grade of fully synthetic oil is mainly SN grade. API on the oil stands for the American Petroleum Institute, and it is divided into grades from SA to SN, with the grade increasing in order. SN is the highest grade of oil. The first specification of fully synthetic oil is composed of the quality grade API and the grade SAE. In terms of types, oil can be roughly divided into two types: mineral oil and synthetic oil, with synthetic oil further divided into semi-synthetic oil and fully synthetic oil. The main difference lies in the base oil.
Was this review help?
9
1
Share
More Forum Discussions

How to Remove the Steering Wheel of a Skoda Octavia?

The method to remove the steering wheel of a Skoda Octavia is: 1. Open the cover in the center of the steering wheel to expose the fixing screw; 2. Loosen the screw using a socket wrench. The steering wheel is connected to the steering shaft via splines, converting the force applied by the driver on the steering wheel's edge into torque, which is then transmitted to the steering shaft. The Skoda Octavia is a compact sedan with a 5-door, 5-seat hatchback body structure. Its dimensions are: length 4659 mm, width 1814 mm, height 1460 mm, wheelbase 2686 mm, fuel tank capacity 55 liters, and trunk capacity ranging from 590 to 1580 liters.
11
0
Share

How Many Cylinders Does the Mazda 3 Axela Have?

The Mazda 3 Axela is a 4-cylinder vehicle, belonging to the compact car category. Taking the 2020 Mazda 3 Axela Manual Zhimei Edition as an example, it is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 117 hp, a maximum power of 86 kW, and a maximum power speed of 6,100 rpm, paired with a 6-speed manual transmission. The 2020 Mazda 3 Axela Manual Zhimei Edition features a 4-door, 5-seater sedan body structure, with dimensions of 4,662 mm in length, 1,797 mm in width, and 1,445 mm in height, a wheelbase of 2,726 mm, and a fuel tank capacity of 50 liters.
3
1
Share

How to Reset the Maintenance Light on a BMW X1?

Methods to reset the maintenance light on a BMW X1: 1. With the car only powered on, press and hold the reset button at the bottom left of the dashboard until relevant maintenance information appears in the middle of the dashboard; 2. Press the reset button once to switch to the maintenance information you want to reset; 3. Press and hold the reset button until a pop-up appears asking if you want to reset; 4. Continue holding the reset button until another pop-up appears showing that the information is being reset with a progress bar below; 5. Wait for the reset to complete, and the progress bar finishing indicates the reset is done, meaning the light is cleared. The dimensions of the 2019 new BMW X1 model are 4565mm in length, 1821mm in width, and 1620mm in height.
6
0
Share

Is 16GB Enough for a Dash Cam?

16GB is sufficient for a dash cam as long as you regularly clean up the memory. However, to avoid unnecessary trouble, it is recommended to purchase a dash cam with 32GB or 64GB storage. Dash cams save recorded footage in segments of 5 or 10 minutes. If the stored data is not cleaned up periodically, over time the video data will occupy the entire memory, preventing new video data from being saved properly. Therefore, it should be cleaned up once a month. When purchasing a dash cam, you can opt for one with larger storage capacity, which allows for storing more video data. On one hand, this saves the car owner the hassle of manually cleaning up the data; on the other hand, it ensures the quality of the video data, playing a decisive role in critical moments.
15
4
Share

What is the power cord connection method for a car dash cam?

The power cord connection method for a car dash cam is: 1. The positive wire is usually red and connected to ACC, the negative wire is usually black and grounded, the long wire is usually yellow and connected to the car's battery or the positive terminal of the constant power supply; 2. Locate the car's ACC, the position of ACC varies for each car, generally found on the left side at the bottom of the steering wheel, install and fix the dash cam, and route the power cable through the A-pillar to reach near the ACC; 3. Open the ACC cover, inside there are usually several small or medium-sized terminals, choose the terminal to connect; 4. Connect the red wire of the power cable to ACC and the black wire to the negative terminal. The working principle of a car dash cam is to digitally record and cyclically update the road conditions in front of or around the car, and even data such as in-car audio, the car's acceleration, steering, and braking are also recorded.
15
0
Share

Which country does Honda belong to now?

Honda now belongs to Japan. Honda Motor is a Japanese automobile brand, and in China, there are two joint venture enterprises: Dongfeng Honda and GAC Honda. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda Automobile Company, with dimensions of 4550mm in length, 1820mm in width, and 1685mm in height, and a wheelbase of 2620mm. In terms of configuration, the vehicle is equipped with SRS dual airbags, door beams, front and rear three-point ELR seat belts, seat belt reminders, and a seat safety system with pre-tensioners and load limiters. In terms of power, the vehicle is equipped with two engines: a 2.0-liter naturally aspirated engine and a 1.5-liter turbocharged engine.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.