What is the official fuel consumption of the Mazda 3 Axela?
2 Answers
There are a total of 10 Mazda 3 Axela models currently on sale. Among them, six models—the 2021 Mazda 3 Axela 2.0T Automatic Zhijing, Zhixuan, Zhizun, Zhiya, Zhiyao, and Zhirui versions—are equipped with a 158-horsepower engine, with an NEDC fuel consumption of 5.8L per 100km. Three models—the 2021 Mazda 3 Axela 1.5T Automatic Zhimei, Zhiyue, and Zhixing versions—are equipped with a 117-horsepower engine, with an NEDC fuel consumption of 5.6L per 100km. One model—the 2021 Mazda 3 Axela 1.5T Manual Zhimei version—is equipped with a 117-horsepower engine, with an NEDC fuel consumption of 5.8L per 100km. The fuel tank capacity is the same for all 2.0T Axela models. The distance that can be covered on a full tank of fuel is as follows: For models equipped with the 158-horsepower engine, the fuel tank capacity is 50L, and the distance that can be covered on a full tank is 50/5.8*100=862km. The 1.5T Axela models have varying fuel consumption rates per 100km, and the distance that can be covered on a full tank is as follows: For models equipped with the 117-horsepower engine, the fuel tank capacity is 50L, and the distance that can be covered on a full tank is 50/5.8*100=862km. For models equipped with the 117-horsepower engine, the fuel tank capacity is 50L, and the distance that can be covered on a full tank is 50/5.6*100=893km. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power and require more gasoline for combustion. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance, leading to higher fuel consumption. Natural wind: Driving against strong winds or on windy days increases aerodynamic resistance, resulting in higher fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more fuel for combustion and increasing fuel consumption. Additionally, in cold weather, the engine control unit may operate at higher RPMs to warm up the engine, further increasing fuel consumption.
I've driven the Mazda3 Axela, and according to the official MIIT fuel consumption data, its combined cycle fuel economy is generally around 5.8 to 6.3 liters per 100 kilometers, depending on the engine. For example, the 1.5L naturally aspirated model has a tested value of about 5.9 liters, but actual daily driving tends to be slightly higher because the test is conducted under laboratory conditions simulating mixed urban and highway scenarios. Fuel consumption also depends on your driving habits. For instance, if I gently press the accelerator and avoid sudden braking, I can get close to the official figure. However, if you frequently encounter traffic jams and use the air conditioning, it can rise to over 7 liters. Car enthusiasts like to use this number as a reference for fuel efficiency, especially since Mazda's Skyactiv technology is quite efficient, and regular maintenance also helps reduce fuel consumption. Remember, the MIIT data is just a baseline—don't take it too seriously. In reality, you should combine it with your fuel gauge and driving records. I recommend downloading a fuel consumption app to track it more accurately, especially since highway cruising is even more fuel-efficient. When it comes to driving, small tricks can save your wallet a lot.
