···
Log in / Register

What is the normal tire pressure for the Baojun 560?

4 Answers
OLydia
07/29/25 3:23am

The normal tire pressure range for the Baojun 560 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The Baojun 560's tire pressure monitoring data is displayed on the dashboard's LCD screen. The driver can switch to the tire pressure monitoring system display page by rotating the knob on the dashboard left or right, which will show the air pressure of each tire. The Baojun 560 is equipped with a tire pressure monitoring system that automatically monitors the tire pressure in real-time while driving and alerts the driver to tire leaks or low pressure to ensure driving safety. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged while driving, the tire pressure warning light will come on. For sensor damage, the only solution is to replace it with a new part.

Was this review help?
19
1
Share
AbigailAnn
08/12/25 2:01pm

I've been driving the Baojun 560 for many years, and I remember its normal tire pressure is generally between 2.3 and 2.5 bar. The specific value should be checked on the sticker on the car body, usually detailed on the inside of the driver's door frame, such as 2.4 bar for the front tires and 2.5 bar for the rear tires. When unloaded, it's recommended to maintain around 2.3 bar, while when fully loaded or driving on highways, increasing to 2.5 bar is safer. Too low tire pressure increases fuel consumption and tire wear, while too high pressure may burden the suspension system and make the ride feel bumpy. It's best to check with a tire pressure gauge every month, adjusting more frequently in seasons with large temperature changes, as tire pressure naturally decreases by 0.1 to 0.2 bar in cold weather. Developing good tire pressure habits can make your car last longer, saving you both hassle and money, without frequent trips to the repair shop.

Was this review help?
8
5
Share
Expand All
VanHayden
10/02/25 6:06am

I usually drive my Baojun 560 in the city and find that setting the tire pressure around 2.4 bar is most reliable. There's usually a clear label inside the car, such as on the driver's door pillar, indicating 2.3 bar for the front tires and 2.4 bar for the rear tires. Sticking to these values can save a lot on fuel costs. If the pressure is too low, the increased contact area and friction can raise fuel consumption by over 10%. If it's too high, the center of the tire wears out faster, shortening its lifespan and leading to premature replacement costs. Remember to check with a simple pressure gauge monthly—it's easy and economical. In summer, slightly reduce the pressure to avoid blowout risks, and in winter, slightly increase it. Developing this habit ensures a smooth, comfortable ride and reduces the chance of accidents.

Was this review help?
15
4
Share
Expand All
Henderson
11/15/25 7:50am

I have been driving the Baojun 560 for a long time, and the standard tire pressure reference on the car's label is usually in the range of 2.2 to 2.5 bar. It is advisable to have the front tires at 2.3 bar and the rear tires at 2.4 bar. Both too high and too low pressures are dangerous, potentially affecting braking distance and causing tire blowouts, especially on highways. Regular checks are essential to avoid negligence. Simply use a handheld pressure gauge at home to measure periodically, ensuring safe driving. Maintaining proper tire pressure can also extend tire life and save on car maintenance costs.

Was this review help?
8
3
Share
Expand All
More Forum Discussions

Can Modified Wheel Size Pass the Annual Inspection?

Modifying wheels is a relatively conspicuous modification. If the wheel modification is not registered with the vehicle management office, it will not pass the annual inspection. Introduction to Wheels: Wheels are the rotating part of the tire's inner rim connected to the hub through spokes, which is the metal component mounted on the axle that supports the tire. Also known as rims, steel wheels, or simply wheels. Wheels come in various types based on diameter, width, forming method, and material. Types of Wheels: Depending on the characteristics and needs of different vehicle models, the surface treatment process of wheels also varies, mainly divided into painting and plating. For ordinary vehicle models, the appearance of wheels is less considered, with good heat dissipation being a basic requirement. The process mostly involves painting, which includes spraying followed by baking, making it cost-effective with vibrant colors that last long, even when the vehicle is scrapped. Many mass-market vehicle models use painted wheels. Some fashionable and dynamic colored wheels also employ painting technology.
18
0
Share

Is the Venucia D60 compliant with China VI emission standards?

Some models of the Venucia D60 comply with China VI emission standards, while others meet China V standards. The China VI-compliant models are sold in regions where the China VI standards have been implemented, and the China V-compliant models are available in areas where the China VI standards have not yet been enforced. Below is some relevant information about the Venucia D60: 1. The Venucia D60 is a compact sedan, equipped with a 1.6-liter naturally aspirated engine across all variants. The engine, coded HR16, delivers a maximum power of 93 kW, a maximum torque of 154 Nm, with peak power achieved at 5,600 rpm and peak torque at 4,000 rpm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. The Venucia D60 employs a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. The vehicle is equipped with an electric power steering system, which provides a lighter steering feel.
6
1
Share

Where is the air conditioning filter element of the Haifuxing located?

The air conditioning filter element of the Haifuxing is located under the glove box on the passenger side. Here are some relevant details: 1. If the filter element is dirty, you can clean it by blowing compressed air from the reverse side. Operation method: Hold the air gun 5 cm away from the filter element and blow at a pressure of 500 kPa for about 2 minutes. The air filter element is very prone to dust accumulation. Use compressed air to remove the dust, but never wash it with water, as this can easily cause damage. 2. The Haifuxing is a compact car launched by FAW Haima, with body dimensions of 4464mm in length, 1695mm in width, and 1425mm in height, and a wheelbase of 2610mm. The Haifuxing is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 111ps and a maximum torque of 147nm, paired with a 5-speed manual transmission.
12
4
Share

What are the reasons for a car not starting with no power at all inside?

There are several reasons why a car may not start with no power at all inside: 1. Dead battery: This could be due to a drained battery from leaving headlights on for a long time or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit failures. 2. Incorrect gear position: For automatic transmission cars, the gear must be in P or N position when starting. If it is in R or D position, the car will not start. Some manual transmission cars may also not start if the clutch is not depressed. 3. Lack of antifreeze: Using water or low-quality antifreeze in the car can cause the engine to freeze and crack in extremely cold winter conditions, leading to the water pump failing to operate, the car not starting, and damage to other engine components.
4
4
Share

How to Decelerate an Automatic Transmission Car?

To decelerate an automatic transmission car, release the accelerator pedal early and apply the brake. Below are detailed introductions to the gear positions of an automatic transmission vehicle: 1. The R gear is the reverse gear. When this gear is engaged, it connects the hydraulic system's reverse gear oil circuit, causing the drive wheels to rotate in reverse for backward movement. Never forcibly shift to the "R" gear when the vehicle hasn't come to a complete stop, as this may damage the transmission. 2. The N gear is the neutral gear. When neutral is engaged, the planetary gear system idles without power output. 3. The D gear is the drive gear. When the gearshift lever is in this position, the hydraulic control device automatically connects the corresponding forward gear oil circuit based on throttle opening signals and vehicle speed signals. It can automatically shift up or down according to driving speed changes, achieving automatic transmission functionality. 4. The P gear is the parking gear. It uses a mechanical device to lock the rotating parts of the vehicle's tires, preventing the car from moving.
11
2
Share

What are the functions of the multi-function steering wheel buttons in Volkswagen?

The functions of the multi-function steering wheel buttons in Volkswagen are: 1. Resume button: Press RES to restore the previously set speed after temporarily canceling cruise control; 2. Set button: Press SET to set the current speed as the cruise speed after temporarily canceling cruise control; 3. Deceleration button: If adaptive cruise control is activated, use it to reduce speed; 4. Acceleration button: If adaptive cruise control is activated, use it to increase speed; 5. Cruise control on/off button: Press to turn on the cruise control function; 6. Cancel button: Press to cancel the cruise control function; 7. Volume adjustment buttons: Press to increase or decrease volume, with the left button decreasing volume and the right button increasing volume; 8. Bluetooth phone button: Press to answer incoming calls; 9. Voice control button: Press to activate voice commands; 10. Option toggle button: Used to switch between up and down options on the multi-function display; 11. Menu toggle button: Used to switch between left and right options on the multi-function display, press OK to confirm; 12. Track change button: Press to skip to the next or previous track.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.