What is the normal tire pressure for the 2021 Corolla?

1 Answers
OEmery
07/29/25 11:13pm
The normal tire pressure range for the 2021 Corolla is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. To check the tire pressure in the 2021 Corolla, use the buttons on the left side of the steering wheel to toggle left and right. First, press the left button on the steering wheel to toggle, and then you can see the tire pressure numbers for all four wheels displayed on the right side of the instrument panel. Generally, a tire pressure above 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates localized wear on the central tread of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8bar or above 3.0bar. In this case, a tire inspection and pressure adjustment are needed. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to come on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire valve. If the sensor is damaged due to impact while driving, it will also trigger the tire pressure warning light. For sensor damage, the only solution is to replace it with a new one.
Was this review help?
4
1
Share
More Forum Discussions

What brand is Jetta?

Jetta is an independent brand under Volkswagen. The models under the Jetta brand include the Jetta VS5, Jetta VS7, and Jetta VA3. Taking the Jetta VS5 as an example, in terms of body dimensions, its length, width, and height are 4419mm, 1841mm, and 1616mm respectively, with a wheelbase of 2630mm. In terms of power, the Jetta VS5 is equipped with a 1.4T engine, paired with two types of transmissions: a 5-speed manual transmission and a 6-speed automatic manual transmission. In terms of appearance, the front face of the Jetta VS5 adopts Volkswagen's X design elements, extending bidirectionally to the hood and lower grille. The side body line design continues the Volkswagen brand style, running through the entire body.
4
0
Share

BMW One-Button Start Not Responding?

Here are the specific reasons why the BMW one-button start is not responding: 1. Steering wheel locked. The steering wheel lock is an anti-theft feature. When the car is turned off, turning the steering wheel a certain angle from the centered position in one direction will lock the steering wheel. In the locked state, the one-button start function will not work. You need to turn the steering wheel left and right while pressing the engine start button to release the tension and unlock the steering wheel. 2. Gear not in P (Park) position. 3. Smart key battery dead. When the vehicle's smart key battery is dead, the key's transmission power is low, making it difficult for the car's sensor to detect the key, preventing the one-button start from completing the ignition.
6
3
Share

How to Adjust the Height of the High Beam on the Lamando?

Here are the steps to adjust the height of the high beam on the Lamando: 1. Open the two adjustment screws at the back of the headlight assembly. 2. After opening, you will see one screw for adjusting left and right and another for adjusting height; simply adjust the height. Below is additional information on how to replace the high beam bulb on the Lamando: 1. Open the engine hood. 2. Locate the position of the headlight. 3. Open the dust cover at the back of the headlight. 4. Pull out the bulb socket by hand. 5. After removing the socket, the bulb can be taken out from the headlight. 6. Insert the new bulb and secure its position with the wire clip. 7. Align the corresponding plug of the bulb socket and firmly insert the socket.
10
4
Share

What is the ground clearance of the BYD Qin Plus DM-i?

The ground clearance of the BYD Qin Plus DM-i is 130mm. Ground clearance, also known as minimum ground clearance, refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Taking the BYD Qin Plus DM-i 2021 55KM Flagship model as an example: it is a compact car launched by BYD with dimensions of 4765mm in length, 1837mm in width, and 1495mm in height. It is equipped with a 1.5L naturally aspirated engine with a maximum power of 81kw, paired with an E-CVT continuously variable transmission.
5
4
Share

What type of engine oil is used for Toyota Corolla?

Toyota Corolla uses 5W30 engine oil. The 5W in 5W30 indicates the cold-start performance of the oil. Using oil with a lower number before the W makes it easier to start the engine in cold weather. The 30 in 5W30 represents the viscosity characteristics of the oil at high temperatures, where higher viscosity oil may be more suitable for high-speed driving or heavy-duty vehicles. The Corolla is a compact sedan produced by FAW Toyota, featuring a MacPherson strut independent front suspension and an E-type multi-link independent rear suspension. Its body dimensions are 4635mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm.
4
3
Share

Does the Bora rear seat not have seat belt buckles?

The Bora rear seat has seat belt buckles, with three buckles located between the seats. The car seat belt is a safety device designed to restrain occupants during a collision, preventing secondary collisions with the steering wheel or dashboard, or avoiding injuries caused by being thrown out of the vehicle during a crash. The Bora is an independently designed model under FAW-Volkswagen, featuring a front-end design that incorporates Volkswagen's new design language. The design integrates continuous lines into the front face, connecting the headlights with the chrome-plated grille through precise and bold lines. The contour lines of the headlights are meticulously matched with the internal design lines, complementing the chrome grille to form Volkswagen's iconic front face.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.