What is the normal range for SUV tire pressure in winter?

1 Answers
LeonardoAnn
07/29/25 8:40pm
In winter, due to the principle of thermal expansion and contraction, tire pressure should be slightly higher than in summer. Generally, it is recommended to increase the tire pressure by 0.1-0.2 bar based on the standard tire pressure of SUV tires. The standard tire pressure for SUVs is usually between 2.2~2.5 bar, so the normal range for SUV tire pressure in winter is approximately 2.3~2.7 bar. Of course, the appropriate tire pressure for an SUV in winter should be adjusted according to the manufacturer's recommended value, which is generally around 2.5 bar. Here is more information about car tire pressure: 1. In addition to considering the season, tire pressure should also be adjusted based on the driving environment. For long-distance driving, the tire pressure should be about 0.2 bar higher than the standard pressure. 2. Proper tire pressure is crucial. Both overinflation and underinflation can affect tire performance and driving safety. Moreover, tire pressure also impacts tire performance and fuel consumption.
Was this review help?
12
0
Share
More Forum Discussions

How wide is a typical lane?

A typical lane is generally 2.8 to 3.75 meters wide, with variations depending on road conditions. Below are the detailed specifications: 1. 3.75-meter design condition: Applicable to urban expressways, arterial roads, and mixed traffic lanes for large vehicles, with a design speed exceeding 60 km/h. 2. 3.50-meter design condition: Applicable to general urban roads (excluding expressways) where mixed traffic lanes for large vehicles have a design speed below 60 km/h, or dedicated small vehicle lanes with a design speed above 60 km/h; also applies to urban road intersections and exit lanes for mixed large vehicle traffic. 3. 3.25-meter design condition: Applicable to dedicated small vehicle lanes on general urban roads, or the minimum width for exit lanes of dedicated small vehicle lanes at reconstructed intersections. 4. 3.0-meter design condition: Applicable to the minimum width for dedicated small vehicle lanes at newly constructed intersection entry lanes, or the minimum width for mixed large vehicle traffic lanes at reconstructed intersection entry lanes. 5. 2.8-meter design condition: Applicable when land use is restricted for entry lanes at reconstructed intersections, representing the minimum width.
18
0
Share

Do You Need to Press the Brake When Starting?

For safety reasons, automatic transmission vehicles require pressing the brake when starting. In practice, it is also advisable to press the brake while shifting gears in manual transmission vehicles to prevent the car from jerking forward or rolling back. Even if you make a mistake during startup, there's no need to worry about accidents; at worst, the engine may stall, and you can simply restart. Here are some key points to note when starting: 1. Adjust the Seat: Before starting, adjust the seat to ensure your feet can comfortably and firmly press the clutch, brake, and accelerator. 2. Engage First Gear: For manual transmission vehicles, shift into first gear when starting, fully depress the clutch, and place your right foot on the accelerator, ready to go. 3. Release the Clutch: When starting, slowly lift the clutch pedal with your left foot to about halfway. Once you feel the vehicle begin to vibrate, release the handbrake promptly, gently tap the accelerator, and as the car starts to move forward, gradually release the clutch completely. Then, apply a bit more throttle to successfully start the vehicle.
9
0
Share

Is it normal for the Nissan Sylphy to have a cold start RPM over 2000?

The cold start RPM of over 2000 for the Sylphy is normal. This is because the vehicle's computer increases the throttle opening to ensure a smooth start when the engine is cold, resulting in a temporarily higher idle speed. After approximately 2 minutes, the idle speed will return to normal. Important Notes: When the engine maintains a reasonable RPM range, the vehicle's fuel efficiency is optimized, leading to lower fuel consumption. If the RPM is too high, it can cause the engine to operate under excessive load, increasing fuel consumption and potentially damaging the engine in severe cases. Low RPM: If the RPM is too low, the fuel in the engine cylinders may not burn effectively, leading to carbon buildup issues. This can eventually cause symptoms such as poor acceleration and difficulty starting. For manual transmission vehicles, excessively low RPM can even cause the engine to stall. When driving, it is essential to pay attention to road conditions and vehicle speed, and shift gears as needed to keep the engine within a reasonable RPM range for optimal performance.
12
2
Share

What causes unstable idle speed in the Beidou Star (Suzuki Wagon R)?

Here are the possible causes of unstable idle speed (fluctuating high and low) in the Beidou Star (Suzuki Wagon R):1. Throttle body: Mostly related to a dirty throttle body. For vehicles with throttle bodies, if carbon deposits or other contaminants accumulate in the throttle body area, it will reduce air intake and cause unstable idle.2. Idle air control valve failure: The idle air control valve may be stuck or damaged, or there could be an issue with the ECU. Air leaks in the intake manifold can also affect idle speed. Intake manifold or various valve leaks: These faults directly affect the quality of the fuel-air mixture and combustion efficiency. Potential leak points include the intake manifold, vacuum hoses, charcoal canister purge valve, exhaust gas recirculation (EGR) valve, positive crankcase ventilation (PCV) valve, etc., which need to be inspected and repaired one by one.
12
1
Share

How many years can the battery of the Sylphy Zero Emission last?

The battery of the Sylphy Zero Emission generally lasts about 8-10 years. Extended information is as follows: 1. Battery considerations: 1. High cost: The replacement cost of new energy batteries is currently very high. 2. Shallow charge and discharge: If shallow charge and discharge can be maintained during daily use, it can significantly extend the battery's lifespan. 2. Basic information about the Sylphy Zero Emission: 1. Exterior: The Sylphy Zero Emission largely retains the styling of the fuel version. The most noticeable changes are at the front, which adopts Nissan's V-Motion design language, featuring a larger black plastic grille compared to the Sylphy, paired with a U-shaped chrome trim, making the grille design more similar to the Leaf. 2. Interior: The interior layout resembles that of the fuel version. The steering wheel and instrument panel adopt the same design as the Leaf. 3. Powertrain: It is equipped with a TZ200XS5UR electric motor with a maximum power of 80kW (109PS) and a range of 338km.
14
2
Share

Can the Audi A3 play music via USB drive?

The Audi A3 cannot play music via USB drive. The A3 does not have a USB audio input interface, only an SD card audio input, so you can only insert an SD card to listen to music. Main functions of the USB interface: Utilizing the standard power supply in the car, the USB interface can be used to charge DC-5V electrical devices or serve as a fixed power supply interface for electrical equipment. Features of the USB interface: The USB interface, which is part of the vehicle's transmission line, offers advantages such as fast transmission speed, ease of use, support for hot-plugging, flexible connectivity, and independent power supply. It is generally a universal interface for connecting USB devices like USB drives and MP3 players. How to use the car USB interface: Insert the USB drive into the car's USB interface. Turn on the device power to use it, and you can also copy MP3 music from a computer.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.