What is the motor power of the WM EX5?

2 Answers
LiamFitz
07/24/25 2:25am
The motor power of the WM EX5 is 160 kW. Below are the specific details of the WM EX5: 1. Configuration: Standard features include a full LCD instrument panel, a 12.8-inch floating central control screen, one-key start, dual-zone independent air conditioning, and a CN95 micron air filtration system. In terms of safety configurations, the new car is equipped with an ESP electronic stability system, a tire pressure monitoring system, a parking radar system, etc. 2. Power: The WM EX5 uses a permanent magnet synchronous motor with a total motor power of 160 kW, a maximum torque of 315 Nm, and a maximum motor horsepower of 218 hp. 3. Charging: Equipped with a ternary lithium battery, it supports fast charging with a minimum charging time of 0.5 hours and slow charging with a minimum time of 8.4 hours.
Was this review help?
20
1
Share
VanGenesis
08/10/25 10:03pm
The motor power of the WM EX5 is typically around 160 kilowatts, which converts to approximately 215 horsepower. This power output provides strong acceleration in urban driving, with a 0 to 100 km/h sprint time of about 7 seconds, delivering a smooth and powerful driving experience. If you opt for the high-performance version, the power can reach up to 300 kilowatts, offering even quicker acceleration at the cost of higher energy consumption, making it suitable for users who enjoy the thrill of strong acceleration. For daily driving, it's advisable to drive gently, as frequent hard acceleration can impact the battery's longevity.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

Where is the Sylphy engine produced?

The Sylphy engine is a joint-venture engine produced by Dongfeng Nissan. The engine model of the new Sylphy is HR16, which includes 1.6L and 1.8L CVVT engines. The dimensions of the new Sylphy are 4641mm in length, 1815mm in width, and 1450mm in height, with a wheelbase of 2712mm, classifying it as a compact sedan. The new Sylphy is equipped with a four-cylinder naturally aspirated engine, delivering a maximum horsepower of 139 HP, a maximum power of 102 KW, and a maximum torque of 169 NM. It comes with a 5-speed manual transmission or a CVT continuously variable transmission. The front suspension is a MacPherson independent suspension, while the rear suspension is a torsion beam non-independent suspension. The interior is available in black, beige, and black-brown color schemes, and features a flat-bottom multifunction steering wheel.
17
4
Share

What kind of transmission does the Tang fuel version use?

The Tang fuel version uses a 6-speed automatic manual transmission. More information about the Tang fuel version is as follows: 1. Power configuration. This car is equipped with a 2.0T turbocharged engine, and the transmission system configuration is a 6-speed automatic manual transmission that matches the engine. The transmission used in this car is produced by Hyundai Powertech. It has an ECO energy-saving mode, and during the driving process, you can use both manual mode and automatic mode. 2. Although this transmission does not have a significant advantage in terms of gear count, its technology is very reliable, and the transmission effect is excellent. During driving, the gear shifts are smooth, with almost no noticeable jerking, which to some extent enhances the driving comfort of the car. 3. An automatic manual transmission refers to a transmission that has both manual and automatic modes, allowing for both manual and automatic gear shifting. During the driving process, the two modes can be switched at will.
14
0
Share

Do LED headlights require a ballast?

Most LED headlights do not require a ballast, but in practice, it is necessary to analyze based on the specific vehicle model. For example, the LED bulbs of the Teana come with a built-in ballast, so replacing the LED bulbs also requires replacing the ballast. The principle of the ballast: it instantly converts 12V current into high voltage and maintains stable high voltage. This high-intensity voltage is used to activate the HID bulb to produce strong light between the two electrodes, achieving high-brightness illumination. The functions of the ballast: 1. It has a cold-start current of less than 6.5A, ensuring fast startup; 2. It features a wide-voltage design, ensuring normal startup under both low and high voltage conditions.
12
2
Share

When is the toll-free period in 2020?

According to the official notice issued by the Ministry of Transport, from 0:00 on February 17 until the end of epidemic prevention and control efforts, all toll roads nationwide will be exempt from tolls. Other toll-free periods remain consistent with previous years' regulations. Below are the details regarding the highway toll exemption: 1. Scope of exemption: The vehicles eligible for toll-free passage are passenger vehicles with 7 seats or fewer (including 7 seats) traveling on toll roads, including motorcycles permitted to travel on ordinary toll roads. 2. Toll-free sections: The toll roads eligible for toll-free passage are those that comply with the "Highway Law of the People's Republic of China" and the "Regulations on the Administration of Toll Roads," and have been legally approved as toll roads (including toll bridges and tunnels). Whether airport expressways in various regions implement toll-free passage is determined by the provincial (autonomous region, municipal) people's governments.
11
4
Share

What Causes the Engine Temperature to Rise by One Bar When Driving on the Highway?

When the car's engine temperature rises by one bar while driving on the highway, the possible cause could be a faulty thermostat leading to insufficient opening, resulting in poor coolant circulation. Here is more information about the car radiator: 1. Introduction: The car radiator, also known as the heat exchanger, is a key component of the car's cooling system and part of the engine assembly. 2. Function: Its purpose is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket for circulation, achieving temperature regulation. 3. Working Principle: When the engine's temperature is high, the water pump circulates the coolant repeatedly to lower the engine's temperature and protect it. In winter, if the coolant temperature is too low, the circulation stops to prevent the engine from becoming too cold.
8
1
Share

Is the Smell in a New Car Formaldehyde?

New car smell is formaldehyde. Here are the relevant details:1. Material adhesives: Formaldehyde is colorless and odorless, but new cars contain formaldehyde. The peculiar smell in cars generally comes from air pollution inside the vehicle, which mainly originates from various decorative materials throughout the car, such as roof felt, leather seats, plastic materials, etc. These materials commonly use adhesives containing formaldehyde, benzene for coloring, and plastic components may contain formaldehyde. 2. Odor removal: In addition to simply spraying formaldehyde treatment, activated charcoal can also be used by placing several packets and replacing them regularly. If conditions permit, a specialized formaldehyde air purifier can be installed in the car to absorb formaldehyde. The best method is to ventilate the car to remove formaldehyde, reducing the concentration of pollutants inside and allowing harmful gases to dissipate quickly.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.