What is the most effective way to eliminate mice in a car?

2 Answers
DiJonathan
07/28/25 6:42pm
The most effective methods to eliminate mice in a car are using mouse traps or rodenticide packages. However, rodenticide packages need to be placed in concealed locations to prevent accidental ingestion by children. Here are some related solutions to prevent mice from entering the engine compartment: Regularly inspect the engine: Open the hood and check the engine regularly, maintaining a frequency of once a week. Clean the engine promptly: If mouse droppings or urine are found, take the car to a detailing shop to clean the engine. It is also recommended to perform an engine wire harness maintenance, which not only maintains the wire harness but also helps eliminate mice, achieving two goals at once. Replace damaged wiring immediately: If wiring or hoses are found to be chewed, promptly take the car to a repair shop for replacement to avoid accidents. Change parking spots promptly: If mice are found in the engine compartment, change the parking location immediately and clean the engine.
Was this review help?
14
5
Share
NatalieMarie
08/12/25 12:12am
I've seen many car owners dealing with mice in their vehicles. The most effective solution is to thoroughly clean the car, removing all food waste that might attract mice. Then, use wire mesh or metal sheets to block the ventilation openings in the engine compartment and undercarriage—these are the most basic preventive measures. Mice usually enter through these areas, and if not blocked, they'll keep coming back. I recommend checking your parking spot weekly, keeping the environment dry and free of clutter, and placing mothballs or rodent-repellent items like peppermint oil sachets in the car. This method is simple, cost-effective, and protects wiring from being chewed, avoiding the risk of breakdowns or fires.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

What Causes the Car to Shake After Turning Off?

The reasons for the car shaking after turning off are: 1. The engine throttle is too dirty or the fuel injector has excessive carbon deposits, causing the gasoline sprayed by the cold start injector to be largely absorbed by the carbon deposits, resulting in a lean mixture during cold starts and difficulty in starting; 2. Poor performance of the ignition system, including spark plugs, high-voltage wires, and ignition coils; 3. Abnormal fuel supply pressure, incorrect intake pressure values, and malfunctioning sensors. The solutions for the car shaking after turning off are: 1. Clean the fuel system and check the idle speed motor to remove carbon deposits; 2. Check if the spark plugs have excessive carbon deposits and replace them if necessary; 3. Check the fuel pressure and replace faulty components.
10
2
Share

What to Do If the Antifreeze Is Overfilled?

The method to deal with overfilled antifreeze is: you can directly use a syringe to extract the antifreeze until the liquid level is below the MAX mark. If not handled promptly, the excess antifreeze can easily overflow from the pressure relief valve under the continuous high-temperature operation of the car. Antifreeze is a type of coolant containing special additives, mainly used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, boiling in summer, and protecting against scale and corrosion all year round. The main functions of antifreeze are: 1. Providing freeze protection for the engine, enabling it to withstand low-temperature environments; 2. Preventing the coolant from freezing and cracking the radiator or damaging the engine cylinder block and cylinder head when the car is parked in cold winter; 3. Offering efficient heat dissipation.
10
1
Share

Is the Tanyue's Transmission Dry or Wet?

The Tanyue's transmission is wet. The wet dual-clutch transmission uses transmission oil to assist in cooling the clutch plates, as the clutch plates are immersed in the transmission oil, allowing continuous circulation to dissipate heat. The Tanyue measures 4589mm in length, 1860mm in width, and 1660mm in height, with a wheelbase of 2731mm and a fuel tank capacity of 60 liters. It is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission. The front suspension features a MacPherson independent suspension, while the rear suspension is a multi-link independent suspension.
17
3
Share

What is the method for extracting gasoline from a car?

The method for extracting gasoline from a car is: 1. Open the engine hood and locate the fuel line connecting the engine to the fuel tank; 2. After removing the fuel line, connect a plastic tube to a container; 3. Open the vehicle's relay box and unplug the fuel pump relay; 4. Connect wires to the relay socket; 5. Insert the key into the ignition switch and turn it to the ON position to start siphoning the fuel. The working principle of extracting gasoline from a car is: The power unit provides power, which is converted from high-speed operation to low-speed operation of the oil pump crank through a reducer. The crank, connecting rod, and walking beam mechanism then convert the rotational motion into reciprocating motion of the oil pump, driving the piston in the oil pump to extract crude oil.
4
2
Share

Where is the oil dipstick located on the Volvo S60L?

The oil dipstick on the Volvo S60L is located on one side of the engine. The handle of the engine oil dipstick is usually yellow or orange in color. You can pull out the engine oil dipstick by applying some force, and then check the engine oil level. As long as the oil level is within the reasonable range marked on the dipstick, it is normal. The dimensions of the Volvo S60L are 4761mm in length, 1850mm in width, and 1437mm in height, with a wheelbase of 2872mm and a trunk capacity of 391 liters. The Volvo S60L is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 163PS, a maximum power of 120kW, and a maximum torque of 265Nm, paired with an 8-speed automatic transmission.
8
4
Share

Why is the drain pipe of a motorcycle carburetor leaking oil?

Below is an analysis of the reasons for oil leakage from the drain pipe of a motorcycle carburetor: Debris on the contact surface between the needle valve and valve seat: The needle valve and valve seat control the fuel intake, requiring strict sealing with a high surface finish. If debris accumulates on the contact surface, it can lead to poor sealing between the needle valve and valve seat, resulting in oil leakage. Debris mainly refers to impurities and condensed gum in gasoline. To prevent such issues, users should regularly clean the fuel filter and use high-quality gasoline. Needle valve wear: During use, the needle valve can wear due to prolonged exposure to impurities in gasoline and contact with the valve seat; an unbalanced adjustment at both ends of the float can cause lateral force on the needle valve, leading to wear. Worn needle valves result in poor sealing of the valve seat, causing oil leakage.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.