What is the minimum speed limit for small cars on highways?

1 Answers
StRhett
07/29/25 11:10pm
Car speed limits on highways must not be lower than 60 kilometers per hour (except under special circumstances such as severe weather or traffic accidents). Below are relevant details: 1. Legal provisions: Article 78 of the "Regulations for the Implementation of the Road Traffic Safety Law" stipulates that highways shall indicate lane speed limits, with maximum speeds not exceeding 120 kilometers per hour and minimum speeds not lower than 60 kilometers per hour. 2. Highway introduction: Highways belong to high-grade roads. According to China's Ministry of Transport "Technical Standards for Highway Engineering", highways refer to "roads capable of accommodating an average annual daily traffic volume of over 25,000 passenger cars, exclusively designed for high-speed divided-lane vehicle travel with full access control". Although different countries have varying names for highways, they all specifically refer to roads with four or more lanes (inclusive), bidirectional separated traffic, fully controlled access points, and comprehensive grade separation.
Was this review help?
9
5
Share
More Forum Discussions

What is the horsepower of a 490 diesel engine?

490 diesel engine has a rated power of 29 kilowatts, which is approximately 39.5 horsepower. Below is relevant information about diesel engines: 1. Concept: A diesel engine is an engine that burns diesel fuel to obtain energy release. The advantages of diesel engines include high power and good economic performance. The working process of a diesel engine shares many similarities with that of a gasoline engine, with each working cycle also going through four strokes: intake, compression, power, and exhaust. 2. Development prospects: Heavy, noisy, and emitting black smoke, diesel engines have left many people with a poor first impression. However, after years of research and the application of new technologies, modern diesel engines are vastly different from their predecessors. Modern diesel engines typically employ technologies such as electronic control injection, common rail, and turbocharged intercooling, achieving significant breakthroughs in weight, noise, and smoke levels, reaching the standards of gasoline engines.
14
3
Share

Should You Step on the Brake When Changing Lanes in Subject Three?

You do not need to step on the brake when changing lanes in Subject Three. Here are the relevant details: 1. Subject Three: It includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles. 2. Content of Subject Three: The road driving skills test for Subject Three generally includes: preparation before getting on the car, simulated lighting test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting other vehicles, overtaking, making U-turns, and driving at night.
10
5
Share

What does the number 3.00-8 on a tire represent?

Among them, 3.00 refers to the tire section width of 3.00 inches, and 8 refers to the inner diameter of the tire, which means the applicable rim diameter is 8 inches. The following is a partial introduction about tires: 1. Introduction: Tires are round, elastic rubber products assembled on various vehicles or machinery that roll on the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. 2. Required performance: Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
18
3
Share

Can You Get a Driver's License in One Month?

It takes one to four months to obtain a driver's license. Below is an introduction to obtaining a driver's license: 1. Definition: It refers to a legal document issued by the administrative authorities, allowing individuals to drive motor vehicles after they have studied and mastered traffic regulations and driving skills, and passed the required examinations. If the driver's license expires within one year, you can apply for a renewal at the vehicle management office; if it expires for more than one year but less than three years, you need to take the subject one exam, and upon passing, you can renew it normally; if it expires for more than three years, the driver's license will be revoked. 2. Examination Subjects: Include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
12
0
Share

What does 'Wan La San' mean?

Wan La San means: A controller with a power of over 10,000 watts driving a 3,000-watt motor. The engine power formula is speed multiplied by torque equals horsepower, which must be calculated using international standard units. The resulting horsepower is then multiplied by 735 watts to get the power, where 1 horsepower = 735 watts. Below is some relevant information about engine power: 1. The concept of engine power: The work done by an engine per unit time is called the engine's power. Corresponding to indicated work and effective work, it is called indicated power and effective power (output power), respectively. The difference between these two is called mechanical loss power. 2. Maximum engine power: The speed at which the engine reaches its maximum power is called the maximum power speed. In automotive manuals, the unit for speed is denoted as mn.
20
1
Share

What does 3.25-18 tire mean?

3.25-18 indicates: a low-pressure tire with a cross-section width of 3.25 inches and a rim diameter of 18 inches, also known as a bias-ply tire. Below is relevant information about tires: 1. Tire markings: Tire specifications are commonly represented by a set of numbers, where the first number indicates the tire cross-section width, and the latter indicates the rim diameter, in inches. For example, 165/70-R14 means a tire width of 165 millimeters, an aspect ratio of 70, and a rim diameter of 14 inches. 2. Symbol meanings: The letters or symbols in the middle have special meanings: "X" indicates a high-pressure tire; "R" and "Z" indicate radial tires; "-" indicates bias-ply tires. Due to their poor safety, load capacity, and high-speed stability, bias-ply tires are only used in some low-end off-road vehicles and heavy-duty trucks.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.