What is the minimum ground clearance of the Yaris L and Vios?

3 Answers
MacOwen
07/24/25 12:04pm
The minimum ground clearance of the Yaris L is 100mm, while the Vios has a minimum ground clearance of 160mm. The minimum ground clearance of the Yaris L and Vios refers to the distance between the lowest point (excluding wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles like rocks or tree stumps without collision. Generally, higher ground clearance improves off-road capability, but excessively high clearance may reduce stability at high speeds. The Yaris L is a subcompact car produced by GAC Toyota. Its dimensions are 4440mm in length, 1700mm in width, 1490mm in height, with a wheelbase of 2550mm. The Vios is a subcompact car manufactured by FAW Toyota. Its dimensions measure 4435mm in length, 1700mm in width, 1490mm in height, with the same 2550mm wheelbase. Typically, sedans have ground clearance ranging from 110mm to 150mm, while SUVs feature 200mm to 250mm clearance. However, the ground clearance of the Yaris L and Vios isn't static - it varies depending on load conditions, so changes in vehicle load should be considered when evaluating clearance. When selecting a vehicle, ground clearance can serve as one reference factor. The choice should align with intended usage and road conditions: for well-paved urban roads, lower clearance enhances stability and comfort; for frequent travel on poor road surfaces or off-road conditions, higher clearance is preferable to prevent undercarriage scraping or damage.
Was this review help?
4
5
Share
VanZoey
08/11/25 2:59am
With years of research in automotive data, I can confirm both vehicles have a ground clearance of around 140mm. This measurement is quite interesting as it represents a medium level among sedans. During test drives, I specifically observed that they handle speed bumps in residential areas with ease, but extra caution is needed for deep rural potholes. Note that tire pressure affects actual ground clearance, with manufacturers testing under standard pressure conditions. Truth be told, 140mm suffices for urban roads, though I always advise sedan owners against aggressively mounting curbs - sedan underbodies are more vulnerable than SUVs. For frequent off-road travel, consider switching to tires with thicker sidewalls, which can improve clearance by approximately 10mm.
Was this review help?
2
1
Share
Expand All
VonEthan
09/25/25 4:53am
As a long-time observer of the car market, I can say that both the Vios and Yaris L have a minimum ground clearance of 140mm, which is quite suitable for city commuting. Last time when I accompanied a friend to check out cars, I specifically brought a ruler to measure the actual vehicles in the showroom. This height can handle ordinary puddles, but it's best to avoid deep water areas during heavy rain. After purchasing, be careful not to install underbody protection plates, as some aftermarket ones can reduce the ground clearance by a few millimeters. Also, when the rear seats are fully occupied, the car will sit even lower. I've seen cases where people carried too much cargo and ended up scraping the chassis. During maintenance, remember to ask the technician to check the suspension height, as aging springs can cause the chassis to gradually lower.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What car has two inverted V logos?

The inverted V semi-circular logo belongs to NIO. Here are some relevant introductions about NIO: NIO Headquarters Location: NIO's headquarters is located in Hefei City, Anhui Province. NIO is a global smart electric vehicle company, founded in November 2014 under the leadership of William Li. NIO is a globally oriented startup brand, with research and development, design, production, and business institutions established in 13 locations including San Jose, Munich, London, and Shanghai, bringing together thousands of top-tier talents in the automotive, software, and user experience industries. NIO's Vehicle Models: Its main products include the NIO ES6, NIO ES8, NIO EC6, NIO EVE, NIO EP9, and NIO ET7. NIO is committed to creating a joyful lifestyle for users by providing high-performance smart electric vehicles and an ultimate user experience.
9
4
Share

Does the Audi A4 have an anti-pinch function for its windows?

Audi A4 is equipped with an anti-pinch function, which is enabled by default. Here is the relevant information: 1. Technology: The window anti-pinch technology is achieved through 'tactile' and 'visual' methods. 2. 'Tactile': The so-called 'tactile' method means that when the power window mechanism detects an obstacle on the glass, it will automatically stop the window from rising. 3. 'Visual': The more advanced control system relies on 'visual' detection, which is essentially an optical control system that monitors whether there are obstacles within the movement range of the power window, thereby controlling the glass movement without the need for the obstacle to come into contact with the glass. The Audi A4 inherits Audi's tradition of prioritizing safety, and its standard safety features create an ideal safety environment for passengers, meeting various international passive safety standards.
8
4
Share

Is the OBD Car Power Booster Effective?

OBD power optimization has some effect, but it is not comprehensive. The following is an introduction to OBD: 1. Main function: The main function of OBD is to read ECU data streams in real time, but optimizing the ECU data streams to achieve the goal of improving power and saving fuel is somewhat impossible. A balance between power and fuel efficiency is required, and you cannot have both. 2. Differences: It has now been upgraded to OBD-I, which differs from all previous on-board diagnostic systems in that it has strict emission targeting. Its actual performance is to monitor vehicle emissions by monitoring the vehicle's power and emission control systems. When there is a fault in the vehicle's power or emission control system that may cause carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NOx), or fuel evaporation pollution to exceed the set standards, the malfunction indicator light will illuminate as an alarm.
4
2
Share

Where is the cabin air filter located in an old Mazda 3?

The cabin air filter in older Mazda 3 models is located beneath the glove compartment on the passenger side, and requires removal of the fuse box for access. Below are the functions of the cabin air filter in older Mazda 3 models: 1. Ensures the filter fits snugly against the housing to prevent unfiltered air from entering the cabin. 2. Filters out solid impurities such as dust, pollen, and abrasive particles from the air. 3. Absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and lasting moisture absorption capabilities. 4. Prevents the car windows from fogging up, ensuring clear visibility for the driver and passengers, thus enhancing driving safety. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. It also effectively sterilizes and deodorizes the air.
19
5
Share

What is the normal water temperature for a car in summer?

Generally, the normal operating temperature for small cars is between 80°C and 105°C. Below is a related introduction about the radiator: Concept: The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator where the heat is dissipated, and then returns to the water jacket to circulate, achieving temperature regulation. It is a part of the car engine. Working principle: The radiator is an essential component of a water-cooled engine. As a crucial part of the cooling circuit in a water-cooled engine, it absorbs heat from the engine block to prevent overheating. Due to water's high specific heat capacity, the temperature rise after absorbing heat from the engine block is not significant. Therefore, the engine's heat is managed through the liquid circuit of the coolant.
10
0
Share

How Long After Applying Window Film in Summer Can You Roll Down the Windows?

You can roll down the windows three days after applying window film to your car in summer. The functions of car window film: Its main functions are to block ultraviolet rays, reduce heat, prevent injuries caused by flying glass shards, and reduce glare. Additionally, it can minimize damage to interior items and occupants from UV exposure, lower the car's interior temperature through physical reflection, reduce the use of air conditioning, thereby decreasing fuel consumption and saving costs. Precautions for car window film application: After applying the film, avoid rolling down the windows for three days; do not wash the car within three days. If bubbles appear at the edges of the film, they should be repaired at the installation site within 24 hours. Delaying beyond this period may cause the adhesive around the edges to dry completely, making the film immovable and likely to crease during repair.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.