What is the minimum ground clearance of the Toyota CHR?

3 Answers
McAna
07/25/25 1:31am
The minimum ground clearance of the Toyota CHR is approximately 135mm, while the official chassis height is 145mm. Ground clearance refers to the distance between the ground and the lowest rigid part of the vehicle. The ground clearance of a car varies depending on whether it is unloaded or loaded. Ground clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. Vehicles with lower ground clearance have a lower center of gravity but poorer off-road capability. The Toyota CHR measures 4360mm in length, 1795mm in width, and 1555mm in height, with a wheelbase of 2640mm. In terms of the chassis, the Toyota CHR features a combination of front MacPherson struts and rear double-wishbone independent suspension. The underbody protection is quite comprehensive, with most areas covered by resin panels.
Was this review help?
20
2
Share
DallasLynn
08/11/25 11:22am
I'm particularly fond of researching SUVs like the Toyota C-HR. Its minimum ground clearance is approximately 150mm, which is considered medium among urban SUVs—significantly higher than regular sedans, making it easy to handle street potholes and speed bumps, but not suitable for truly rugged off-road conditions. I remember once driving a friend's car on a mountain trip and encountering some dirt bumps; the chassis didn't scrape, and it performed steadily in snowy conditions. However, I should remind you that long-term driving requires attention to tire wear and pressure, otherwise the actual clearance may decrease, indirectly affecting its off-road capability. Overall, it's a very practical design, suitable for daily commuting and light adventures, and I often recommend friends to consider this when choosing the right model.
Was this review help?
6
0
Share
Expand All
DeTalia
09/26/25 8:42am
As an average car owner, I've been driving the Toyota C-HR for several years, and its minimum ground clearance of about 160mm is crucial for me. Whether it's daily school runs or commuting, I rarely experience scraping when encountering water-filled potholes or uneven roads, which saves me a lot of hassle. Once at the steep entrance of my neighborhood, I was worried about scraping, but it passed smoothly. I recommend new owners to regularly check the undercarriage, especially after long drives on rural roads, as dirt buildup can affect the clearance. Additionally, compared to other compact SUVs like the Honda CR-V with higher ground clearance, the C-HR appears slightly lower, but it's absolutely sufficient for city use—offering both agility and a sense of security.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

Can the air conditioning be turned on when a new energy vehicle is turned off?

New energy vehicles can turn on the air conditioning after being turned off. However, there is no cooling function, and prolonged use can easily lead to battery drain. Therefore, it is not recommended to keep the air conditioning on for a long time while the vehicle is turned off. If you need to ventilate, you should switch to the external circulation mode to allow fresh air to enter the car. Common misconceptions about using car air conditioning: 1. Smoking in the car with the air conditioning on: Some people turn on the air conditioning and smoke in the car while resting or waiting, which is harmful to the health of the occupants because the doors and windows are closed, and the smoke cannot escape, naturally irritating the eyes and respiratory system. Therefore, turning on the air conditioning while parked is harmful in itself, and if you must smoke in the car, be sure to adjust the air conditioning ventilation control to the "exhaust" position. 2. Always using the internal circulation mode: Some car owners keep the air conditioning switch in the internal circulation position, which is not ideal. The air conditioning mode should be adjusted according to temperature and environment. The internal circulation system can be used, but not for extended periods. When the air conditioning is first turned on, it's best to use the external circulation mode first and then switch to internal circulation after the temperature drops. 3. Arbitrarily choosing the air conditioning temperature: Car owners often select different temperatures "to stay cool," but when the indoor temperature remains too low for a long time, the body's endocrine system may struggle to adjust, leading to illness. Setting the indoor temperature below 20°C can cause various discomforts.
12
1
Share

What Causes Soft Brakes in a Car?

Brake softness can be attributed to the following reasons: 1. Poor performance of brake fluid, resulting in insufficient friction between the brake pads and brake discs. 2. Over time, moisture can seep into the system. After the moisture evaporates, a certain amount of air gap forms between the brake pads and brake discs, leading to the phenomenon of soft and ineffective brakes. Self-adjustment methods for soft brakes: 1. Start the car and wait for the idle speed to stabilize (approximately 2-3 minutes). 2. Press the brake pedal firmly all the way down, applying strong force. 3. After two seconds, pull up the handbrake while keeping the foot brake pressed firmly for several seconds. 4. Then slowly release the foot brake and finally release the handbrake to complete the adjustment.
14
5
Share

Where is the Start Button in the Panamera?

The start button in the Panamera is located on the left side of the driver's seat, where you can open the electronic screen and press it twice. Below is an introduction about the Panamera: 1. The Panamera is a large coupe produced by Porsche. In terms of power, it offers a choice between a 2.9-liter V6 twin-turbocharged engine and a 4.0-liter V8 twin-turbocharged engine. 2. The cabin is centered around four sport bucket seats, ensuring that every passenger in the Porsche Panamera can experience the brand's strong sports car heritage. 3. Like other top luxury brands that offer personalized customization, the Porsche Panamera provides a wide range of interior decoration options to create unique cabin styles. These include four sets of two-tone leather combinations and seven interior trim choices, such as carbon fiber and olive wood grain panels, offering up to 13 customizable cabin leather and trim combinations.
5
1
Share

What brand is the car with a bull logo?

The bull logo represents the Italian luxury car brand Lamborghini. Below is a detailed introduction to Lamborghini: 1. The full English name of Lamborghini is Automobili Lamborghini S.p.A. It is one of the world's top sports car manufacturers and a symbol of European luxury, founded in 1963 by Ferruccio Lamborghini. 2. The golden charging bull at the front of the car is Lamborghini's iconic emblem. This muscular bull, depicted in an aggressive stance, perfectly embodies the power and unyielding personality of Lamborghini's sports cars. 3. In Italy and around the world, Lamborghini has consistently introduced astonishing supercars that are rare works of art. The brand's designs, crafted by Italy's most prestigious designer, Gandini, reflect a lifetime of dedication. Every angle and line is meticulously perfected, silently conveying Lamborghini's almost primal beauty. With its domineering appearance, Lamborghini consistently integrates extreme speed with stylish design, continuously innovating and seeking new breakthroughs for the brand.
5
0
Share

What materials are used in Tesla batteries?

Tesla models currently use NCA (Nickel Cobalt Aluminum) type batteries. Here is an introduction to Tesla batteries: 1. The common ratio of nickel, cobalt, and aluminum in NCA batteries is 8:1.5:0.5. The aluminum content is very low, making it close to a binary material. Aluminum (a transition metal) replaces manganese, modifying lithium nickel cobalt manganese oxide through ion doping and surface coating. Ion doping enhances material stability and improves cycle performance. However, during production, because aluminum is an amphoteric metal that is difficult to precipitate, the manufacturing process of NCA materials presents challenges. Nickel-cobalt-aluminum batteries require high manufacturing precision and are costly, but aluminum helps improve the chemical stability of battery cycles. 2. Within the ternary system, nickel content can be increased to achieve higher battery energy density. However, the nickel-cobalt-aluminum crystal structure is less stable than nickel-cobalt-manganese, making it prone to collapse at high temperatures, leading to thermal runaway. Additionally, excessively high pH levels can cause cell swelling, posing risks. Overall, Tesla's ternary lithium batteries are currently popular, with most pure electric vehicles using them. Lithium batteries are lighter and have higher energy density, making them highly suitable for pure electric vehicles.
16
5
Share

How to Check Tire Pressure on Trumpchi GS4?

Trumpchi GS4's tire pressure monitoring can be viewed on the dashboard. The vehicle comes equipped with a tire pressure monitoring system that provides automatic alarm alerts, requiring no manual operation. Normal tire pressure range: According to the international GBT2978-2008 standard, the standard tire pressure is 2.4-2.5bar. Methods for adjusting tire pressure: When the vehicle is unloaded or partially loaded, it is advisable to adjust the tire pressure to the lower limit of the standard value. When the vehicle is fully loaded, the tire pressure should be adjusted to the upper limit of the standard value. For new tires, the tire pressure should be increased by approximately 0.2bar above the standard tire pressure. For old tires, the tire pressure should be appropriately reduced according to the standard; if the wear is severe, adjust to the lower limit of the standard tire pressure. For comfort-oriented soft tires, the standard tire pressure can be increased by about 0.2bar. For performance-oriented hard tires, adjust to the lower limit of the standard tire pressure.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.