What is the minimum ground clearance of the Honda Haoying?

1 Answers
DelElias
07/30/25 12:41am
The minimum ground clearance of the Honda Haoying is 208 millimeters. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The Honda Haoying is a compact SUV with a length of 4634 millimeters, a width of 1855 millimeters, a height of 1689 millimeters, a wheelbase of 2661 millimeters, and a fuel tank capacity of 53 liters. The Honda Haoying is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 193 hp, a maximum torque of 243 Nm, a maximum torque speed range of 2000 to 5000 rpm, a maximum power output of 142 kW, and a maximum power speed of 5600 rpm.
Was this review help?
6
4
Share
More Forum Discussions

How to reset the tire pressure warning on a Mercedes-Benz GLC260?

First, use the steering wheel buttons to switch the instrument cluster LCD display to the mileage interface. Press the R button and wait for about 30 seconds, the tire pressure warning light will automatically reset.
13
0
Share

Why would an electric vehicle's tubeless tire suddenly lose air?

Tire quality issues causing severe air leakage. Examples include loose valve stems or punctures with needles. Leakage from aftermarket tire pressure monitors installed on the valve core. It is recommended to contact a 4S store or professional auto repair shop by phone to have repair personnel come for inflation service.
3
1
Share

How to reset the tire pressure on Geely Boyue?

Check the tire pressure display on the dashboard to see which tires have pressure outside the normal range. Unscrew and set aside the valve caps on the tires that need inflation. When the pressure gauge reaches the normal operating range, stop inflating - at this point the tire pressure will be reset.
11
1
Share

How to Check Lights for Subject Three Exam?

When the system issues the instruction 'Exam begins, please turn on the headlights,' rotate the light button to the far right. When driving at night without streetlights and under poor lighting conditions, open the light lever below the steering wheel and pull it upwards once. To alternately use high and low beams, pull the control lever towards the steering wheel up and down four times while the low beam is on.
17
0
Share

What is the usage method of exhaust brake?

Exhaust brake usage method: A regulating valve is installed on the engine exhaust pipe. By closing this valve, the pressure during the exhaust stroke is increased, utilizing the generated negative pressure to obtain braking force. The following are precautions for using exhaust brake: 1. Auxiliary braking: Exhaust brake is an auxiliary braking method and cannot replace service brake for emergency braking, nor can it be used for parking brake. However, exhaust brake can be used simultaneously with service brake. 2. Throttle return to zero: When using exhaust brake, the throttle pedal should be at zero position, and the fuel injector stops injecting fuel. If the accelerator pedal or clutch pedal is depressed, the exhaust brake will automatically turn off, which can prevent engine stalling when stopping and exhaust brake activation during fuel injection.
7
5
Share

Can modified LED headlight assemblies pass the annual inspection?

Whether modified LED headlights can pass the annual inspection depends on the specifications and performance of the modified headlights. If the modified headlights meet the national requirements in terms of color temperature, brightness, and beam angle, which affect driving safety, they can pass the annual inspection. The inspection mainly focuses on two aspects: Whether the brightness meets the requirements, meaning the brightness must not be less than 1400 lumens. Whether the beam angle is compliant, as long as the high and low beam angles are normal. Essentially, as long as the modified LED headlights do not compromise driving safety, they can pass the annual inspection. Relevant regulations for vehicle annual inspections: Vehicles that fail the annual inspection must be repaired within a specified period. If they still fail after the deadline, the vehicle management office will confiscate their license plates, prohibiting further use. Vehicles that do not undergo the annual inspection without reason or fail the inspection are not allowed to be driven on the road or transferred to another jurisdiction. Vehicles that meet the scrapping criteria or exceed the prescribed service life will not be inspected, and their license plates will be revoked, records deleted, and the vehicles scrapped.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.