What is the minimum ground clearance of the Camry?

1 Answers
LucilleFitz
07/29/25 2:19pm
The minimum ground clearance of the Camry is 159mm, which reflects the vehicle's ability to pass over obstacles or uneven ground without collision. Taking the 2021 Camry as an example, it is a mid-size car with body dimensions of: length 4885mm, width 1840mm, height 1455mm, a wheelbase of 2825mm, and a curb weight of 1530kg. The 2021 Camry features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 178PS, a maximum torque of 210Nm, and a maximum power of 131kW, paired with a 10-speed continuously variable transmission.
Was this review help?
4
2
Share
More Forum Discussions

Why Did Mercedes-Benz Discontinue Run-Flat Tires?

Mercedes-Benz discontinued run-flat tires due to their high noise levels and poor ride comfort. Here is some information about run-flat tires: Disadvantages: Run-flat tires are relatively hard, so they transmit more vibration when driving on bumpy roads. Additionally, run-flat tires of the same grade are slightly more expensive than regular tires. Performance: After a tire blowout, a car equipped with run-flat tires can still travel up to approximately 80 kilometers at a maximum speed of 80 km/h, which is sufficient to reach the nearest repair shop for a tire replacement. Therefore, Mercedes-Benz vehicles do not need to carry a spare tire. Function: Run-flat tires not only allow continued driving after losing pressure but also enhance safety. In the event of a blowout, run-flat tires do not collapse immediately because their sidewalls are particularly thick, providing strong support to prevent the vehicle from rolling over. Moreover, vehicles with run-flat tires do not require a spare tire, offering convenience by eliminating the need for immediate tire replacement after a blowout. This also increases trunk space.
20
2
Share

What does it mean when the Audi A4's engine keeps running after turning off?

Because the water temperature inside the engine hasn't dropped immediately, the radiator fan continues to operate for cooling. Once the appropriate water temperature is reached, the fan stops. In other words, even after the car is turned off, the fan may still be working. More details are as follows: 1. The car has an automatic cooling function: After parking, if the engine temperature is too high, the fan will automatically turn on to continue cooling the engine. Once the engine temperature drops to a reasonable level, the fan will stop automatically. 2. A "pop pop pop" sound from under the car: Some owners might hear a "pop pop pop" sound from under the car after parking and turning off the engine. The "culprit" is actually the three-way catalytic converter located at the rear of the vehicle's chassis. This component operates at temperatures close to 1000 degrees Celsius, and after turning off the engine, the metal parts inside expand and contract due to heat, producing some popping sounds. 3. The role of the three-way catalytic converter: It is a purification device in the exhaust system that converts harmful substances in the exhaust into carbon dioxide, water, and nitrogen, reducing harmful gas emissions.
9
0
Share

What is the purpose of Mercedes-Benz chips?

Automotive electronic chips are chips used in vehicles, collectively referred to as automotive chips. They can be categorized into four main types: functional chips MCU (Microcontroller Unit), power semiconductors (IGBT, MOSFET, etc.), sensors, and others. The specific descriptions are as follows: MCU: Primarily connects and controls various peripheral circuits and interface circuits in the vehicle. It acts as the brain of the car, controlling all electronic systems, including suspension, engine control systems, in-vehicle infotainment, wipers and windows, power seats, and other necessary components. Power semiconductors (IGBT, MOSFET, etc.): The full name of the IGBT chip is "Insulated Gate Bipolar Transistor," which is a composite fully controlled voltage-driven power semiconductor device composed of BJT (Bipolar Junction Transistor) and MOS (Metal-Oxide-Semiconductor Field-Effect Transistor). It is mainly used in new energy vehicles. Sensors: Automotive sensors are input devices for the vehicle's computer system. Their function is to convert various operational conditions of the vehicle, such as speed, temperature of various media, and engine operating conditions, into electrical signals for the computer, ensuring the vehicle operates in the optimal state.
11
0
Share

What is the reason why the Mercedes-Benz automatic parking cannot be engaged?

Mercedes-Benz automatic parking cannot be engaged because of improper foot technique and lack of familiarity, which can be improved with more practice. Below is a related introduction to automatic parking: Definition: Traditional handbrakes require the driver to manually release the handbrake or skillfully coordinate the clutch and throttle for a smooth start on slopes. The automatic parking function uses a slope sensor to provide precise parking force via the controller. During startup, the parking control unit calculates information from the clutch distance sensor, clutch engagement speed sensor, throttle pedal sensor, etc. It automatically releases the parking brake when the driving force exceeds the running resistance, allowing the car to start smoothly. However, it is best to turn off this function during low-speed parking to avoid frequent activation. Function: It simplifies operation by avoiding the use of handbrakes or electronic handbrakes, and automatic transmission models do not need to frequently switch between D to N or D to P.
13
5
Share

What to Do If the Windshield Fogs Up Before Driving?

Here are the methods to defog the windshield before driving: 1. Use a specialized defogging agent: There are dedicated defogging agents available in the automotive beauty market. Spray this agent on the inner surface of the car glass and wipe it clean. While removing dirt from the glass, it also forms a thin transparent protective film that effectively prevents the formation of fog caused by condensation. One application can prevent fogging for about 10 days. 2. Turn on the air conditioning while blowing warm air: According to the car manual, the method to defog is to adjust the air conditioning vents to the windshield position and turn on the air conditioning switch to activate the compressor for dehumidification. However, if the temperature control knob is set to the cold air position at this time, the passengers inside the car will feel very cold. Therefore, the temperature knob can be placed in the warm air position to achieve both defogging and warming. 3. If the fog inside the car is not heavy, you can open a small gap in the side windows to allow air convection between the inside and outside of the car, reducing the temperature difference and causing the fog to gradually disappear. The principle of this method is the same as turning on the air conditioning cold air, but it does not increase fuel consumption.
19
3
Share

What is the symbol for abnormal tire pressure?

The abnormal tire pressure indicator is shaped like a can with an exclamation mark inside. Whenever there is a change in the tire pressure, the tire pressure warning light will illuminate. This could indicate a problem with the tire, or it might be due to temperature changes. Of course, it could also be a sensor malfunction or a false alarm. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system usually triggers an alarm if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tire should be inspected and the pressure adjusted. Tire pressure monitoring system not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to display the previous data, causing the tire pressure warning light to stay on. Simply resetting the tire pressure monitoring system will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which is installed inside the tire and connected to the tire inflation valve, monitors the tire pressure. If the sensor is damaged during driving, such as by hitting a curb, it can also cause the tire pressure warning light to turn on. If the sensor is damaged, the only solution is to replace it with a new one.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.