How to remove the tail light of Haval H9?

[BlakelyLynn]

Haval H9 tail light removal method: 1. Remove the plastic cover to expose two screws; 2. Prepare a hex screwdriver and a spare core with replacement tools; 3. After removing the screws, the red lamp holder becomes loose, you need to slightly pull the entire lamp holder outward to remove it; 4. After removing the lamp holder, you can see the wires, first dig out this foam pad; 5. After opening the foam pad, a socket appears, pull the red buckle by hand to unplug the wire connector; 6. Then use a Phillips screwdriver to remove the 4 screws. The Haval H9 is Haval's first high-end off-road SUV, with dimensions of 4856mm in length, 1926mm in width, 1900mm in height, and a wheelbase of 2800mm.

[Vanessa]

I'm quite experienced in removing the tail lights of the Haval H9, as I've repaired them many times myself. First, remember to disconnect the negative battery terminal to avoid the risk of short circuits or electric shock. Then, prepare a Phillips screwdriver and gloves to protect your hands from cuts. Open the trunk, and you'll usually find several screws securing the tail light on the inner side—use the screwdriver to unscrew them one by one and set them aside. After loosening the screws, gently pull the tail light unit outward without using excessive force to avoid damaging the clips or paint. Next, locate the wire connector, press the clip, and carefully unplug it. The entire process takes about 10 minutes, but if there are water droplets inside the tail light or aging wiring, you'll need to inspect and clean them thoroughly before reinstalling. After completion, test the lights to ensure they're working properly. Regular maintenance of the tail lights can extend their lifespan and reduce risks during high-speed driving.

[SanJoseph]

Safety first when removing the Haval H9 taillights. I recommend wearing insulated gloves and goggles, as accidental contact with exposed wires is dangerous. Disconnect the car battery in advance and wait a few minutes before starting work. Take photos of the original positions with your phone before removing screws for easier reassembly. When slowly pulling out the taillight module, be careful not to scratch the paint, and use a plastic pry bar for added safety. Gently disconnect the wiring harness connectors without yanking them. After completion, tighten the screws to prevent loosening. If you encounter damaged wiring or dust buildup, it's best to use professional tools for cleaning. This approach ensures safe and worry-free operation, preventing accidents caused by taillight malfunctions.

[SanAllison]

I previously removed the tail light of my Haval H9 by myself, and it was quite simple. First, locate the screws securing the tail light inside the trunk lid and unscrew them with a screwdriver, keeping them safe. Gently pull out the entire light unit, then disconnect the wiring harness. Take your time during the process to avoid damaging any plastic parts. Once done, reinstall and test the lights. Beginners can watch online videos for assistance to get the hang of it faster.

[TaliaMarie]

To remove the Haval H9 taillight, the main tools I use are: a cross-head screwdriver, a plastic pry bar, and gloves. The screwdriver needs to be medium-sized to tighten the fixing screws. The plastic pry bar helps avoid scratching the car paint. Gloves protect your hands and provide a better grip. During the operation, after disconnecting the battery, first unscrew the screws and then unplug the wiring. Having the right tools prepared increases efficiency and reduces mistakes. Don’t force it without the proper tools, as it’s easy to break the screws. It’s convenient to keep a toolbox handy for DIY car repairs.

[McMaddox]

Once when I was removing the taillight of my Haval H9, I almost made a mistake. At first, I didn't disconnect the battery, and sparks flew as soon as I touched the screw, which was really scary. Later, I obediently disconnected the power and put on gloves. The screw is located on the inner side of the light frame; after unscrewing it, gently wiggle and pull out the light body. Remember the wire colors before unplugging to avoid reversing them. Testing the bulb was easy—it lit up on the first try. Here's a little tip: taking photos of each step can save you a lot of effort, especially for beginners. Regularly check the light cover to prevent water accumulation.