···
Log in / Register

What is the minimum engine displacement for motorcycles to access highways?

4 Answers
Johnson
09/03/25 2:08am

Motorcycles with an engine displacement above 50cc are permitted on highways. Below are specific daily maintenance methods for motorcycles: Idle speed control: During the break-in period, maintain motorcycle idle speed at 100 rpm. Gear-speed correspondence: Ensure proper gear selection matches the riding speed. Braking technique: When braking is required, release the throttle, apply the rear brake with your right foot, while gently applying the front brake with your right hand. Spark plug installation: Hand-tighten new spark plugs until snug, then use a spark plug socket to tighten an additional 1/4 to 1/2 turn.

Was this review help?
4
0
Share
JosieFitz
09/15/25 3:56am

As a motorcycle enthusiast who rides on highways all year round, I must say that in China, the displacement requirement for motorcycles on highways is above 50cc. This regulation is not just a numbers game but a safety consideration. Engines that are too small, such as those below 50cc, lack sufficient power, leading to slow acceleration, difficulty climbing slopes on highways, and potentially causing traffic congestion or accidents. I remember once trying to ride a friend's 40cc small motorcycle on the highway, but the power was insufficient, and I was left behind by the traffic, which was very dangerous. Policies vary slightly by province; places like Guangdong and Zhejiang generally allow motorcycles above 50cc, while Beijing and Shanghai may have stricter or temporary controls. Regardless of displacement, safety gear must be complete: a securely fastened helmet, reflective clothing, and speed controlled within 80km/h. When choosing a motorcycle, it's advisable to opt for 250cc or above for a balance between power and fuel efficiency. In short, follow the rules, ride safely, and don't take risks.

Was this review help?
9
0
Share
Expand All
JesseDella
10/29/25 4:36am

I've been riding motorcycles for long-distance trips for several years and am very familiar with highway regulations. Domestically, engines above 50cc are required for highway access, but in practice, I recommend starting with at least 150cc. Engine size directly impacts the riding experience—too small of an engine means weak power and instability at high speeds. My 250cc street bike handles highways smoothly with quick throttle response and easy speed control. Safety is non-negotiable: a helmet is mandatory, along with protective gloves and knee guards to ensure visibility. Regional differences can be significant, so check navigation apps for route restrictions before traveling—for example, mountainous areas in Yunnan may have additional limitations. Regular motorcycle maintenance is also crucial, including checking tire pressure and the braking system to avoid sudden breakdowns. In short, safety comes first, choose your bike wisely, and don’t let a small engine ruin your trip.

Was this review help?
14
3
Share
Expand All
LaElias
12/12/25 4:46am

As a beginner, I've checked the displacement rules for motorcycles on highways. In China, engines above 50cc are the basic threshold. When choosing a bike, don't go for cheap small-displacement models, or you might get stopped or fined on highways. Safety is crucial: small engines lack acceleration power and pose higher risks at high speeds. Always wear a helmet, preferably a full-face one for wind and impact protection. Before your first highway ride, check your bike's condition, ensuring brakes and lighting systems work properly. Maintain a steady speed while riding, not exceeding 80km/h. Policies vary by province, so check local regulations before traveling to avoid trouble. In short, pay attention to details and prioritize safety.

Was this review help?
18
0
Share
Expand All
More Forum Discussions

What lights should you turn on when driving in a heavy rainstorm?

When driving in heavy rain, turn on the headlights or front fog lights. Precautions for driving in rainy weather are as follows: 1. Turn on the wipers promptly; 2. If there is frost on the windshield, turn on the air conditioning and direct the cold air toward the windshield; 3. The driver should hold the steering wheel with both hands to maintain straight and low-speed driving, and brake gently to prevent the tires from locking up and causing the vehicle to skid; 4. Reduce the vehicle's speed, pay attention to the distance between the front and rear vehicles, and be mentally prepared to take emergency measures in advance. Car headlights, also known as car front lights or LED daytime running lights, should be maintained by: 1. Regularly checking the sealing of the headlights—if the sealing ring between the lens and reflector is damaged, replace it promptly; 2. Regularly cleaning the reflector—if it turns black and the brightness decreases, replace it; 3. Regularly removing dust and stains from the bulbs.
3
3
Share

What Causes Rough Gear Shifting in Automatic Transmissions?

Rough gear shifting in automatic transmissions may be caused by: transmission clutch pressure leakage; obstructed or sluggish transmission oil passages; insufficient or excessive transmission fluid levels; or damaged solenoid valves. The engine's power is transmitted through the transmission, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Whether manual or automatic, transmissions with more gears tend to be more fuel-efficient. Below is relevant information: 1. Damaged solenoid valves: If sludge circulates within the transmission fluid and blocks the oil passages in the valve body, it can cause rough shifting. Over time, this can lead to a series of transmission issues such as overheating, impact, and slipping. 2. Incorrect transmission fluid levels: Verify whether the transmission fluid is at the standard level. Both insufficient and excessive transmission fluid can cause this issue. For vehicles equipped with a transmission dipstick, check whether the fluid level is within the standard range when the engine is running.
5
1
Share

Symptoms of a Faulty Thermostat in Jetta?

Jetta thermostat failure symptoms are as follows: 1. Thermostat malfunction with insufficient opening affects the engine's large and small circulation cycles, preventing effective heat dissipation and causing engine coolant temperature to rise; 2. Excessive thermostat opening leads to low engine coolant temperature, slow temperature rise, increased fuel consumption, and abnormal engine noises; 3. Thermostat sticking tends to cause carbon buildup, resulting in unstable engine idle speed and engine vibration. Below is how the thermostat works: 1. The thermostat is a valve controlling coolant flow path. It's an automatic temperature-regulating device typically containing temperature-sensing components that open/close air, gas or liquid flow through thermal expansion/contraction. 2. At normal temperature, the wax remains solid. When water temperature is below 76°C, the main valve closes completely while the bypass valve opens fully, allowing water from the cylinder head to directly enter the water pump via the bypass pipe (called small circulation). As water only flows between pump and water jacket without passing through the radiator and with small flow rate, the cooling intensity is weak.
14
3
Share

What Causes the Noise When Shifting Gears in an Automatic Transmission?

The reasons for noise when shifting gears in an automatic transmission are as follows: 1. Large valve clearance when the engine is cold: Poor lubrication can cause noise during gear shifting between cold and warm engine states, lasting about 3 minutes, but this is a normal phenomenon. 2. Issues caused by parking on a slope: If you engage the P (Park) gear before applying the handbrake when parking on a slope, the vehicle's weight will be entirely on the P gear due to inertia, leading to noise when shifting gears. However, if you apply the handbrake first, the handbrake will bear the weight, and no noise will occur. 3. Transmission problems: Wear and tear in the transmission, such as a loose driveshaft, worn differential, worn output shaft inside the transmission, worn transmission gears, or faulty shifting mechanism, require immediate attention. It is essential to visit a 4S shop or a professional auto repair shop for technician repairs.
19
5
Share

What are the vehicle warning lights?

There are ten main warning lights: 1. Oil pressure warning light: When illuminated, it indicates the engine oil level or pressure is below standard. Continued driving may cause severe engine wear due to lack of lubrication. 2. Coolant temperature warning light: Displays the temperature of the engine coolant. 3. Engine malfunction light: Shows the engine's operational status, typically in yellow. It lights up during ignition self-check and should turn off after starting. Persistent illumination indicates potential engine system issues. 4. Brake system warning light: If illuminated, first ensure the parking brake is fully released. If it remains lit, check brake fluid level or pad thickness. 5. Power steering warning light: Indicates malfunction in the power steering system. 6. Door/hood open warning light: Warns if doors or hood aren't properly closed. 7. Tire pressure monitoring light: Signals low tire pressure or possible tire damage. 8. Battery warning light: Usually yellow, it should turn off after self-check. 9. ABS warning light: Primarily yellow, failure to light during self-check or persistent illumination indicates potential ABS system faults. 10. Electronic stability control light: Normally indicates system deactivation when lit, and activation when off.
3
1
Share

Should the Foot Always Be on the Brake in an Automatic Transmission?

In an automatic transmission, the foot should not always be on the brake. It is best for the driver to keep the foot in the middle behind the brake and accelerator pedals. Below are specific details about the driver's foot placement: 1. Right Foot: The right foot should always be placed in the middle behind the brake and accelerator pedals. This makes it easier to step on the brake in case of an emergency and also facilitates acceleration. Tilting to the right is the accelerator pedal, while stepping straight down is the brake pedal. 2. Precautions: Do not use the left foot for braking and the right foot for acceleration, as this may lead to simultaneous pressing, wasting fuel and making operation difficult. 3. Correct Movement: The standard way to press the accelerator and brake is to pivot the heel of the right foot and rotate left or right to press, keeping the heel on the ground.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.