What is the method to reset the maintenance light on FAW-Volkswagen Lavida?

1 Answers
StZane
07/30/25 2:17am
FAW-Volkswagen Lavida maintenance light reset method: 1. Turn off the engine; 2. Press and hold the 0.0 button on the instrument panel; 3. Turn on the ignition; 4. When text information appears on the instrument panel screen, release the switch button; 5. Press the 0.0 switch to confirm the information. The FAW-Volkswagen Lavida is equipped with three engines: a 1.2T turbocharged engine, a 1.4T turbocharged engine, and a 1.5L naturally aspirated engine. The engine cylinder arrangement is L-type, and it is paired with a 7-speed dual-clutch transmission, a 5-speed manual transmission, and a 6-speed automatic manual transmission.
Was this review help?
11
1
Share
More Forum Discussions

How to Jump Start a Car Battery?

The method to jump start a car battery is: 1. Connect both ends of the prepared red jumper cable to the positive terminals; 2. Connect both ends of the black jumper cable to the negative terminals, ensuring that the metal wires do not touch the car body to prevent short circuits. The maintenance methods for a car battery are: 1. Avoid parking the car in an open parking lot for extended periods; 2. Each engine start should not exceed 5 seconds, with a minimum interval of 15 seconds between subsequent starts; 3. Regularly charge the car battery; 4. Clean the battery terminals periodically and apply special grease to protect the wiring harness; 5. Avoid using car electrical appliances after the engine is turned off.
7
2
Share

What is a Start-Stop Battery?

A start-stop battery refers to a type of battery that allows a car to automatically shut off the engine when temporarily stopped and restart it when the car moves forward. Its functions include energy saving, emission reduction, and lowering exhaust emissions. Start-stop batteries are categorized into EFB and AGM. Situations where the start-stop function should be turned off include: 1. congested road sections; 2. uphill or downhill driving; 3. when the air conditioning is in cooling mode; 4. driving through waterlogged sections; 5. low-speed parking. Car batteries, also known as storage batteries, serve the following purposes: 1. providing a strong starting current to the starter when starting the engine; 2. assisting the generator in supplying power to electrical equipment when the generator is overloaded.
5
5
Share

What Does It Mean When the Engine Fault Light Turns Yellow?

When the engine fault light turns yellow, it indicates a problem with the car's engine. The possible causes include: 1. Poor quality gasoline; 2. Faulty oxygen sensor leading to an imbalance in the air-fuel mixture ratio; 3. Excessive carbon buildup in the throttle or engine; 4. Engine knocking; 5. Damaged water temperature sensor. An engine is a machine that converts other forms of energy into mechanical energy and is suitable for power generation devices. Engines are categorized based on combustion principles into: 1. Internal combustion engines: Fuel burns inside the engine; 2. External combustion engines: Fuel burns outside the engine; 3. Gas turbines: Combustion produces high-pressure gas, which drives the turbine blades to rotate; 4. Jet engines: Directly generate thrust through high-speed airflow ejected from the nozzle.
7
3
Share

In which year did the Cadillac ATS-L undergo a model change?

Cadillac's current ATS model will be gradually discontinued, to be replaced by the Cadillac CT5 and CT4, both of which will continue to be built using the rear-wheel-drive platform. With the discontinuation of the ATS, the domestically produced ATS-L model will also undergo a model change in 2021. Below is an introduction to the Cadillac ATS-L: The ATS-L's configuration is decent, with standard features including knee airbags, BOSE audio system, one-button start, keyless entry, and engine start-stop technology. The ATS-L is equipped with a 2.0T high-performance inline four-cylinder turbocharged engine, which has been awarded as one of the 'Top Ten Engines.' It delivers a maximum horsepower of 279 hp, a maximum power of 205 kW, and a maximum torque of 400 Nm, paired with a new 8-speed automatic transmission.
19
5
Share

What kind of engine oil is suitable for the Ford Escort?

The Ford Escort is recommended to use 5W30 synthetic engine oil, with a replacement cycle of approximately 1 year or 10,000 kilometers. If the vehicle is driven less frequently, the oil can be changed once a year. However, for vehicles that frequently travel long distances or are in poor condition, it is advisable to replace the oil every 10,000 kilometers or every six months. If the replacement cycle is too long, it may cause damage to the engine. Steps for changing the engine oil: Lift the vehicle, remove the protective plate, and place a container of about 10 liters under the oil drain plug; loosen the drain plug, use an air gun to blow for two minutes at the oil filler port, tighten the drain plug after draining, and wipe it with a paper towel to check for leaks; reinstall the protective plate and lower the vehicle, then use a funnel to add oil to the filler port. Precautions when changing the engine oil: Perform the change when the engine is warm to ensure the old oil is drained as thoroughly as possible; add the appropriate amount of new oil; after adding the oil, start the engine and check for any leaks. Run the engine for 3 minutes to confirm the oil level is at the normal mark.
14
4
Share

Why is the Haval H6 so fuel-consuming?

There are several main reasons why the Haval H6 consumes a lot of fuel. 1. Excellent configuration. In terms of configuration, the Haval H6 comes standard with features such as headlight height adjustment, home light delay-off function, four-way steering wheel adjustment, dual airbags, and rear air conditioning vents. High-end models are equipped with even more advanced features like cruise control systems, which require more fuel consumption. The high configuration also determines the vehicle's high fuel consumption. 2. Related to individual driving habits. Different driving styles result in different energy losses for the vehicle, leading to varying fuel consumption. 3. Related to the road conditions the driver encounters. When driving on rough roads, fuel consumption increases to ensure a good driving experience, especially on difficult road sections. 4. Related to the surrounding driving environment. The more extreme the surrounding environment, the more fuel is consumed to maintain a stable temperature inside the vehicle.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.