How to Lift the Wiper Blades on a BMW 5 Series?

[McLily]

The method to lift the wiper blades on a BMW 5 Series is as follows: 1. Turn off the car without pressing the brake pedal, then press the start button to power on the vehicle; 2. After the car is powered on, wait for about 5 seconds, then press the start button again to turn off the power; 3. Push the wiper control lever upward to the top and hold it for 3 seconds, then the wiper blades can be lifted. Models of the BMW 5 Series include: BMW 525Li, BMW 525LiM, BMW 530LiM, BMW 530Li, BMW 530Li xDrive, etc. Taking the 2021 BMW 525Li as an example, it is a mid-to-large-sized car with body dimensions of: length 5106mm, width 1868mm, height 1500mm, and a wheelbase of 3105mm.

[LeArya]

As a veteran BMW driver with over a decade of experience, let me tell you that raising the wipers on a BMW 5 Series is actually quite simple. Within 10 seconds after parking and turning off the engine, press and hold the wiper stalk on the right side of the steering wheel all the way down for two seconds, and the wipers will automatically move to the service position. This is especially convenient for winter car washes or replacing the rubber blades, but remember to act quickly as it won't work after the power is cut. Once raised, don't force them to avoid damaging the motor. Here's a little tip: it's best to raise them before snowfall and wrap the rubber blades with an old towel to prevent freezing. Before your next drive, just press the stalk once after turning on the power, and they'll return to position automatically. Don't forget to check the drainage holes, as frequent clogging can affect the wipers' lifespan.

[LeKai]

I've worked on quite a few BMWs, and here's the safest way to lift the wipers on a 5 Series: After turning off the engine, immediately push the wiper lever all the way down and hold for 2 seconds until you hear a click – that means they're in position. If that doesn't work, try this alternative method: Press the start button twice without braking to power on, then turn off the power, and immediately push the lever upward for 3 seconds. Once lifted, remember to place a soft cloth underneath before any further operation to avoid scratching the glass. Also, a reminder: Don't peel off sun-baked rubber blades directly – soften them with warm water first. This design actually protects the wiper motor and is far better than forcing them up. Even car wash technicians frequently use this technique.

[DeSamuel]

Last week, I just helped my wife replace the wiper blades on her BMW 530, and it worked like a charm: Park the car and turn off the engine, then hold the wiper stalk on the right side of the steering wheel all the way down within 10 seconds. After two seconds, the wipers will automatically pop up. Remember, this must be done before powering off! Last time during snow, I lifted the wipers in advance to prevent them from freezing. I recommend all the ladies learn this trick—replacing the rubber blades yourself can save over 200 bucks. But a heads-up: Never press the washer button when the wipers are upright, as the water hose can easily freeze and crack. To reset, just power on and push the stalk down—super convenient.

[DeCali]

A practical tip for G30 owners: Turn off the engine → immediately press the wiper lever all the way down for 2 seconds → the wipers will instantly lift up. I change the rubber blades this way every six months, saving half the cost compared to going to the dealership. Remember to close all windows for security before operating, and keep children away when the wipers are raised. Doing this in an underground garage during summer is safest, as the rubber becomes brittle and prone to breaking after sun exposure. By the way, when buying wipers on Taobao, make sure they have the original factory interface—wrong purchases are a waste of money. Last time I changed mine, I also cleaned the windshield drainage channel, where rotten leaves had started to mold.

[DeclanFitz]

Practical experience tells you the key tips for operating the BMW 5 Series wipers: Within 10 seconds after turning off the engine, press the stalk all the way down for two seconds, then wait for the wipers to move to the middle position and gently lift. Make sure the hood is tightly closed, otherwise the system will reject the operation. This is especially useful in sub-zero temperatures during winter, as lifting the wipers in advance can prevent the rubber blades from freezing and cracking. Remember to pinch the base of the metal arm when replacing the blades, as the spring tension is quite strong. To reset, simply power on and gently push the stalk upward. This function is mentioned in the maintenance section of the owner's manual, and it's recommended that new owners try it to extend the lifespan of the wiper motor.