What is the method for replacing the wiper blades on a Sagitar?
2 Answers
The method for replacing the wiper blades on a Sagitar is as follows: 1. Fully raise the wiper arm. To avoid damaging the windshield during the removal and installation process, it is recommended to place a cloth on the windshield when removing or installing the wiper. Lift the wiper arm to change the angle of the blade. 2. Adjust the angle of the wiper blade, preferably making it form a 90-degree angle with the wiper arm. Since the entire wiper blade is secured to the arm with a clip, setting it at a certain angle facilitates removal and installation. 3. Once the angle is set, you can begin the removal process. First, use one hand to lift the rubber blade to expose the fixing hook between the wiper arm and the blade. Then, with one hand, pull the rubber blade sideways while the other hand presses the main bracket firmly downward to separate the wiper blade from the arm. After this, the entire wiper blade can be removed.
Just helped my neighbor replace the Sagitar wiper blades a few days ago, and it's actually super simple! First, lift the wipers and keep them still, turn the key to the ignition position and then turn it off, push the wiper control lever downward and it will stop at the maintenance position. Pinch the small clip on the square buckle in the middle of the wiper, then push it along the direction of the wiper arm to remove it. Align the new wiper blade with the slot and push it in with a 'click'. Don't forget to peel off the protective film on the rubber strip. Volkswagen's universal interface is particularly hassle-free, and even a pair bought online for 30 yuan can last over half a year. After replacement, remember to test the windshield washer fluid to see if the wiping is even. It's best to align the rubber strip grooves parallel to the windshield, otherwise, the wipers may skip and affect visibility.
