What is the method for replacing Pajero spark plugs?

At what water level does a submerged car start to be affected?

When a car is submerged to a height above half of the wheel, it starts to be affected. At this level, improper handling may lead to water entering the interior, engine, or transmission, posing significant risks. This can result in costly repairs and a substantial reduction in the vehicle's resale value. Below are the relevant details: Effects: First, it can damage the car's internal electronic control systems. Starting the engine after water ingress may cause immediate smoke, and water mixing with the oil can lead to engine seizure and total failure. Submerged electrical circuits may short-circuit, causing malfunctions in systems like ABS. Hazards: Submersion can easily cause rusting of body components, shortening the vehicle's lifespan and reducing safety performance. For example, water-damaged vehicles may experience wire corrosion and rust, leading to sudden stalling or spontaneous combustion due to short circuits while driving, with potentially catastrophic consequences. Additionally, the repair costs for water-damaged vehicles are extremely high, often exceeding 50% of the vehicle's value for severely submerged cars.

3

2

Share

What to Do When Experiencing Severe Jerking During 2nd to 3rd Gear Shift in Automatic Transmission?

Severe jerking during gear shifts in an automatic transmission can be caused by several factors, such as a stuck solenoid valve inside the transmission, dirty transmission fluid, pressure loss in the oil pump, or even clutch slippage within the transmission. Jerking, or noticeable shift shock, primarily occurs when there is a mismatch between the engine speed and the driveshaft speed. Below is an introduction to automatic transmissions: 1. Overview: An automatic transmission, as the name suggests, eliminates the need for manual gear shifting by the driver. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, an automatic transmission has six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). 2. Types: Common types of automatic transmissions in vehicles include hydraulic automatic transmissions, hydrostatic transmissions, electric transmissions, stepped mechanical automatic transmissions, and continuously variable transmissions (CVTs).

11

1

Share

What are the requirements for scheduling Subject 2 of the driving test?

The requirements for scheduling Subject 2 of the driving test are: You can schedule the Subject 2 test 10 days after obtaining the learning driving permit (passing the Subject 1 test). In regions that implement a clock-in training hour system, you must also complete the required training hours before scheduling. Subject 2, commonly known as the small road test, is the first practical test for students after the theoretical Subject 1. The main test items include five mandatory tasks: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. The steps to schedule Subject 2 are: 1. Open the Traffic Management 12123 app, click on 'Schedule Exam,' select Subject 2, and then check the agreement to confirm you have read it; 2. After the scheduling request is accepted, you can check the status in the online progress query section; 3. If the application is approved, you will receive an SMS reminder, and you can then proceed to the designated test center at the specified time.

11

5

Share

Will it be very hot to take the driving test in summer?

It will definitely be hot to take the driving test in summer. Here are some precautions for the driving test: 1. Don't forget to release the handbrake when starting: Whether the handbrake was pulled when parking before or not, you should always release the handbrake when getting in the car to start. 2. Fasten the seat belt when getting in the car: Good habits start with fastening the seat belt. It is advised that students develop the good habit of fastening the seat belt as soon as they get in the car from now on. 3. Don't forget to pull the handbrake when parking: This issue is the same as fastening the seat belt. 4. Don't forget to shift to neutral when getting out of the car: Forgetting to shift back to neutral or P gear after parking may cause the engine to stall at best, and if you also forget to pull the handbrake, it may cause the car to surge forward at the parking position, resulting in losses for yourself.

16

1

Share

Can the first maintenance be done in advance?

Yes, the first maintenance can be done in advance. Below are the precautions for the first maintenance: 1. The first maintenance of a new car must include inspection and replacement of six major components. It is essential to change the engine oil and oil filter, and clean the air filter. Check whether the coolant level is normal. Inspect the car's brakes and whether there are any scratches on the chassis components. 2. Check whether the power steering fluid level is normal and whether there is any oil leakage at the oil pipe connections. Inspect the generator, air conditioning, water pump, and the aging and tightness of the belts. Check the tire pressure and wear condition, and perform tire rotation if there is wear. According to relevant regulations, exceeding the first maintenance date is considered as voluntarily giving up the right to the first maintenance. If the first maintenance is not performed, any future quality issues with the car will not be covered under warranty. Car owners must pay attention to the dealer's reminders, so do not miss the first maintenance deadline.

9

2

Share

What is the required color temperature range for car headlights?

The color temperature should be between 3500K and 5000K, with 4300K generally providing the best lighting effect. Here is some relevant information about color temperature: 1. Color temperature is the most common indicator of the spectral quality of a light source. It is defined based on an absolute black body. When the radiation of a light source in the visible range is identical to that of an absolute black body, the temperature of the black body is referred to as the color temperature of the light source. 2. The higher the color temperature, the cooler and whiter the light appears; conversely, the lower the color temperature, the warmer and yellower the light appears. Due to differences in color temperature, the color of the light also varies. For example, at 4300K, the light appears white with a slight yellow tint; at 6000K, the color is white and close to natural light; at 10000K, the light takes on a light blue hue. This shows that as the color temperature gradually increases, the color of the light shifts toward cooler tones, commonly referred to as cool light.

14

5

Share

What is the method for replacing Pajero spark plugs?

At what water level does a submerged car start to be affected?

What to Do When Experiencing Severe Jerking During 2nd to 3rd Gear Shift in Automatic Transmission?

What are the requirements for scheduling Subject 2 of the driving test?

Will it be very hot to take the driving test in summer?

Can the first maintenance be done in advance?

What is the required color temperature range for car headlights?

Is the maintenance service provided by 4S stores nationwide applicable?

What are the reasons for a motorcycle's lack of power when going uphill and inability to accelerate?

What to Do When the Car Door Won't Lock?

Where is the tire tread pattern model located?