···
Log in / Register

How to Load 8 Discs in a BMW 5 Series?

6Answers
BriellaLee
07/29/2025, 05:47:10 PM

After inserting the first disc, press and hold button 1 for a few seconds to set it. Then insert the second disc, press and hold button 2 for a few seconds to set it. Below is an introduction to the BMW 5 Series: 1. Overview: On September 26, 2020, the new BMW 5 Series made its grand debut at the 2020 Beijing International Auto Show. As a mid-cycle facelift model, it continues to offer both gasoline and plug-in hybrid variants, along with the choice of M Sport package and Luxury package for exterior styling. 2. Exterior: With a brand-new aesthetic design, it showcases a responsive stance. The one-piece large-sized double kidney grille exudes more presence, complemented by adaptive LED headlights featuring BMW Dynamic Beam technology. 3. Interior: High-quality design is evident throughout the spacious cabin. The long-wheelbase body creates more possibilities for space experience. Comfort seats feature larger areas of contrast stitching and diamond-quilted decorations.

Was this review help?
115
Share
DeEden
08/15/2025, 05:14:52 PM

When I drove the BMW 5 Series, I often used the multi-disc system. Loading 8 discs was straightforward. First, locate the CD changer in the glove compartment and press the eject button to make the first slot pop out. Insert a disc with the label facing up, and it will automatically draw it in. Then press the eject button again to switch to the next slot and repeat the process. Remember to wait for the machine to respond after each disc—about 5 seconds—before inserting the next one. After all 8 discs are loaded, press the close button to retract the tray. Avoid using heavily scratched old discs as they can jam the system; I usually picked CDs with good sound quality. Also, be mindful not to let the car interior get too hot, as it can affect disc reading.

Was this review help?
19
Share
Expand All
LeAlexa
10/17/2025, 01:46:27 AM

I once helped a friend with the multi-disc system in a BMW 5 Series, and the operation was actually quite intuitive. Just open the glove compartment on the passenger side to see the disc changer. Press the Load button to let the tray slide out, then start by placing the first disc with the label facing up and gently pushing it in. Wait for the indicator light to change, then press the Load button again to pop out a new slot for the second disc, repeating this process eight times. Don’t rush the process—let it rest for two seconds between each disc. After all discs are loaded, you can either press the close button or let the system retract automatically. Before inserting the discs, check for fingerprints or scratches on the surface to prolong the machine’s lifespan.

Was this review help?
13
Share
Expand All
FernandoLynn
11/30/2025, 01:29:55 AM

The BMW 5 Series I previously drove came with an automatic CD changer that supported up to 8 discs. The loading method involves a continuous operation: Press the LOAD button to eject the slot → Insert the first CD (printed side facing up) → Wait for it to be drawn in completely → Press the LOAD button again → Insert the second disc, repeating this process eight times. Make sure the discs are positioned correctly and avoid forcing them in. During operation, the display next to the driver's seat will indicate the remaining capacity. It's recommended to clean the dust inside the machine monthly—just gently brush the slot with a soft-bristled brush. It's quite easy to maintain.

Was this review help?
8
Share
Expand All
Winter
01/20/2026, 02:53:45 AM

The 8-disc CD changer for the BMW 5 Series is located inside the glove compartment, and the operation can be divided into three steps. First, start the vehicle and power on the system, then press the eject button on the CD changer. Next, insert the discs one by one; after each disc is inserted, wait for it to be automatically drawn in before pressing the eject button again to open a new slot. Once all 8 discs are loaded, close the tray. I usually keep some specialized cleaning discs in the car and clean the laser head every three to four months. Make sure to use standard 12cm-thick discs, as irregularly shaped discs can damage the internal gear assembly. During hot summer days, avoid continuous playback for more than two hours to prevent overheating and system crashes.

Was this review help?
11
Share
Expand All
DeRyder
04/16/2026, 03:34:01 AM

The BMW 5 Series multi-disc system can hold up to 8 discs, with only one disc operable at a time. Locate the disc slot at the base of the center console and press the illuminated LOAD button until its indicator flashes. After the tray extends, place the first disc with its label facing up and insert it flat. Once the disc is drawn in, immediately prepare the second disc and press LOAD again when the panel's green light illuminates. Repeat this process until all eight discs are loaded, then press the close button to finish. Note: Avoid loading discs on bumpy roads to prevent scratches. Regular dusting of discs is also important—using a lens cloth to wipe in circular motions yields the best results.

Was this review help?
13
Share
Expand All
More Q&A

What is the size of the BMW 5 Series steering wheel?

The size of the BMW 5 Series steering wheel is 380 millimeters. Steering wheel composition: Frame, generally made of zinc alloy or aluminum alloy, with some manufacturers experimenting with cheaper and lighter magnesium alloy. The frame is produced through die-casting. A small number of manufacturers still use steel sheet metal for the frame, which has a more complex structure; Foam, the foam material is generated in a foaming machine, with the frame fixed in the foaming machine during production. Steering wheel grip: If the steering wheel is viewed as a clock face, the correct hand position is left hand between 9 and 10 o'clock and right hand between 3 and 4 o'clock. In the event of a collision, this posture is more conducive to supporting the body. If only four fingers are used to grip the steering wheel with the thumb sticking out, when the wheel hits a stone or a high step, the front wheel may suddenly turn to one side, causing the steering wheel to rotate rapidly, which could potentially break the thumb.
119
Share

What are the differences between the BMW GT and the BMW 5 Series?

BMW GT and BMW 5 Series have the following differences: Different appearances: The BMW 5 Series GT is a multifunctional coupe. The 5 Series is mainly designed for commercial use, with distinct appearances. The GT is imported and divided into the 535GT and 550GT. Only the standard wheelbase version of the new 5 Series is imported, while the rest are domestically produced by BMW Brilliance. Although the BMW 5 Series GT is named after the 5 Series, it uses the chassis of the standard wheelbase 7 Series. Different interiors: The interior of the 5 Series GT adopts BMW's consistent minimalist style, with combinations of various elements more resembling the flagship 7 Series. The steering wheel design is the same as that of the 7 Series and the new 5 Series, but to appropriately highlight its uniqueness, an electroplated decorative strip is added below the steering wheel airbag cover, making it look younger than the 7 Series steering wheel. Different headlights: The new BMW 5 Series features angled headlights connected to the grille as a whole; the lower grille on the front bumper is larger and more eye-catching than the current model. The entire series also comes standard with LED headlights and taillights. The design layout of the central control section is quite similar to the sixth-generation 7 Series. The combination of leather and solid wood in the digital instrument panel and central control screen ensures an overall sense of luxury.
109
Share

What is the material of the Tayron engine?

Tayron engine is made of cast iron. Tayron uses the following three engines: The 1.4-liter turbocharged engine has a maximum power of 150 horsepower and a maximum torque of 250 Nm. The maximum power speed of this engine is 5000 rpm, and the maximum torque speed ranges from 1750 to 3000 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block; the low-power version of the 2.0-liter turbocharged engine has a maximum power of 186 horsepower and a maximum torque of 320 Nm. The maximum power speed of this engine is 5000 rpm, and the maximum torque speed ranges from 1600 to 4000 rpm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and a cast iron block; the high-power version of the 2.0-liter turbocharged engine has a maximum power of 220 horsepower and a maximum torque of 350 Nm. The maximum power speed of this engine ranges from 4500 to 6200 rpm, and the maximum torque speed ranges from 1500 to 4400 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and a cast iron block. The cast iron engine used in Tayron has the following characteristics: Advantages: First, the cast iron engine has small thermal deformation. For an engine that operates under high temperature and pressure for long periods, the cast iron engine has the advantage of good high-temperature resistance and is less prone to deformation. Second, when a cast iron engine wears out, repairs are simple and cost-effective, and processing is more convenient than with aluminum alloy; Disadvantages: The cast iron engine is heavy and has slow heat dissipation, which is not advantageous for lightweight body design, and its heat dissipation is slower compared to aluminum alloy material.
108
Share

Why is there abnormal noise when accelerating the car?

Car engine abnormal noise when accelerating is caused by insufficient lubrication of engine components by the oil. The following is an introduction about the engine: 1. Engine braking: Engine braking refers to the process of using the resistance of engine operation to slow down the vehicle. When the actual driving speed of the car exceeds the speed that should be achieved at the current gear and throttle position, it enters the engine braking state. 2. Included elements: An engine is a machine that can convert one form of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc.
105
Share

What to Do If Wrongfully Deducted Points from Driver's License?

Under normal procedures, it is difficult for someone else to fraudulently use your driver's license to deduct points. This is because handling traffic violations generally requires the license holder to personally sign for confirmation and present relevant documents. Additional information: In such cases, traffic police recommend that the affected party first visit the nearest traffic police station to print out the violation processing records and then file a police report. Additionally, the vehicle owner can request to review the traffic ticket from the traffic management department. If it is confirmed that the signature on the ticket is not theirs, they can request a handwriting analysis. After obtaining evidence such as a non-personal signature on the penalty notice or video footage, the owner can apply for administrative reconsideration at the local traffic violation processing center.
102
Share

Is the SAIC Skoda Kamiq's engine from Volkswagen?

Kamiq uses an engine that belongs to Volkswagen. Here are the relevant details: 1. Parameters: The Kamiq is a compact SUV under the Skoda brand. It has a wheelbase of 2610 mm, with length, width, and height dimensions of 4390 mm, 1781 mm, and 1593 mm respectively. 2. Engines used: The Kamiq is equipped with two types of engines: a 1.2-liter turbocharged engine and a 1.5-liter naturally aspirated engine. The 1.5L engine is also used in Volkswagen's Santana, while the 1.2T engine is utilized in Volkswagen's Bora.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.