···
Log in / Register

What is the method for installing a one-touch start system in the Sagitar?

1 Answers
SanKennedy
07/24/25 12:33pm

The method for installing a one-touch start system in the Sagitar is as follows: Turn the mechanical key to the 'NO' position to power up the entire vehicle. The wire on the original ignition switch that does not carry electricity is the starter motor wire. Connect this wire to the starter motor wire of the one-touch start system. Taking the 2021 Sagitar as an example, it is a compact car with the following dimensions: length 4753mm, width 1800mm, height 1462mm, and a wheelbase of 2731mm. The fuel tank capacity is 50 liters. The 2021 Sagitar features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 112PS, a maximum power output of 85kW, and a maximum torque of 175Nm. It is paired with a 5-speed manual transmission.

Was this review help?
19
2
Share
More Forum Discussions

How to use the windshield washer spray?

To use the windshield washer spray: 1. The windshield washer switch is located on the right-hand control lever of the steering wheel, which is the same lever used to adjust the wipers; 2. Push this lever forward to activate the washer spray. In some vehicles, you may need to pull the lever backward to spray water. The windshield wiper, also known as a windscreen wiper or wiper blade, is a device used to wipe away raindrops and dust from the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Due to legal requirements, almost all vehicles are equipped with wipers, and some models like hatchbacks and SUVs also have rear window wipers.
15
5
Share

How to Perform Vehicle Crystal Coating?

Vehicle crystal coating method is: 1. Park the car in a shaded area and thoroughly clean the body; 2. Use clay bar with QD liquid to further clean the body; 3. Wipe with a non-woven cloth dipped in degreaser; 4. Pour the crystal coating liquid into a dedicated sponge and evenly apply it on the car paint, working panel by panel until the entire vehicle is covered. Vehicle crystal coating provides reliable paint sealing technology, offering efficient and long-lasting protection to the car paint, preventing environmental factors from affecting the paint color. The concept of vehicle paint crystal coating is introduced to distinguish it from coating, waxing, and glazing. The basic requirement for crystal coating is that the material used must be SIO2 inorganic substance.
2
2
Share

What is the purpose of tires?

The purpose of tires is: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. To reduce and absorb vibrations and impact forces during driving, prevent severe vibrations and premature damage to automotive components, adapt to the high-speed performance of the vehicle, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency. Tires are circular elastic rubber products assembled on various vehicles or machinery for rolling on the ground, usually mounted on metal rims. A significant portion of the world's rubber consumption is used for tire production.
11
3
Share

Why is the Cruze tachometer not working?

The reasons why the Cruze tachometer is not working are: 1. The flexible shaft connection inside the tachometer is disconnected; 2. The tachometer needle has fallen off or is stuck; 3. There is foreign matter inside the instrument panel; 4. There is a problem with the wiring inside the tachometer, such as aging or burning out. The solution is to remove the negative terminal of the battery, disconnect the power for five seconds, and then reconnect it. The Cruze is a compact car launched by Chevrolet, with body dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. In terms of appearance, the side profile of the Cruze is made very three-dimensional through the use of lines, presenting a sense of sporty forward motion.
20
4
Share

What is the reason for high engine RPM but no increase in speed when the accelerator is fully pressed?

The reasons for high engine RPM but no increase in speed when the accelerator is fully pressed are: 1. The throttle position sensor is dirty or has voltage imbalance; 2. The engine's intake, fuel system, or ignition has a malfunction or abnormality; 3. The intake system has leaks or blockages; 4. The engine's fuel system has a malfunction. Solutions: 1. Use a fuel filter, where fuel passes through layers of filter paper from the outer wall to the center, allowing clean fuel to flow out; 2. Replace the clutch pedal; 3. Replace the release bearing return spring; 4. If there is noise when the clutch just engages or disengages, it indicates that the driven plate rivets are loose or exposed, and the driven plate should be replaced.
3
5
Share

What are the reasons for the disappearance of the Sagitar reversing camera?

The reasons for the disappearance of the Sagitar reversing camera are: 1. Disconnection of the video extension cable connector; 2. Damage to the camera or obstruction; 3. Poor wire contact; 4. Dead battery. Solutions: 1. Timely inspection and repair, replace the camera if necessary; 2. Check the wires inside the central control panel; 3. Recharge the battery or replace it with a new one. The Sagitar is a brand under FAW-Volkswagen, with body dimensions of 4753mm in length, 1462mm in width, and 1800mm in height, and a wheelbase of 2731mm. In terms of power, the Sagitar is equipped with a Volkswagen EA211 1.4T engine.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.