What is the method for disassembling and assembling the center console of the Enjoy?
3 Answers
The method for disassembling and assembling the center console of the Enjoy is: 1. Use a flathead screwdriver to insert along the seam starting from the left air vent on the passenger side, then pry off the black border around the main unit; 2. Remove the fixing screws around the main unit, take out the main unit and unplug the wiring harness at the back; 3. When reassembling, follow the reverse steps mentioned above. Taking the 2021 Enjoy as an example, it is a compact car with the following dimensions: length 4756mm, width 1840mm, height 1509mm, wheelbase 2730mm, minimum ground clearance 150mm, fuel tank capacity 40 liters, and curb weight 1376kg.
Disassembling the Honda Envix center console requires a step-by-step approach – I've tried it myself before. First, disconnect the negative battery terminal for safety. Use a plastic pry tool starting from the lower edge of the AC panel, and never use metal tools to avoid scratches. The clips are extremely fragile – when you hear a click sound, ease up and pry slowly. Once the panel is removed, you'll see the head unit screws. When unscrewing them, pay attention to the wiring harness connectors; press the clip gently before pulling. During reassembly, remember to secure the clips first before tightening the screws, otherwise you might get rattling noises. The whole process requires courage and meticulousness – it's wise to have some replacement clips ready since OEM plastic parts are expensive. Before starting, it's best to search for a video tutorial to follow along.
When repairing the car, we are most afraid of damaging the clips when dismantling the Inspire center console. Prepare plastic pry tools and a screwdriver set. Start by removing the decorative strip on the passenger side as the entry point. Gently pry open a gap to locate the clip positions. The main unit's fixing screws are usually on the sides—remember to support the bottom of the unit when removing. There are two types of wiring harness connectors: push-in types require squeezing the clip, while rotary types need to be turned counterclockwise. During reassembly, align the upper slot first, then press firmly from bottom to top. Avoid wearing rings or watches to prevent scratching the piano black panel. Always remember to disconnect the power for safety first.