···
Log in / Register

Is the Roewe RX5 a domestic car?

3Answers
DelRiley
09/01/2025, 03:46:05 AM

Yes. Here are the relevant introductions about the Roewe RX5: 1. Exterior design: It adopts the "Rhythm Design" language, equipped with matrix LED headlights composed of 24 LED light sources. The body lines are stylish and dynamic, featuring a dual-waistline design on the side profile. The roof is equipped with a luggage rack, and the overall body lines are full of rhythm and tension. 2. Interior design: The interior also follows the "Rhythm Design" concept, with a simple and stylish overall design. The center console panel is wrapped in leather, and it features a red and black dual-color scheme. The vehicle also offers a dark black interior option. The Roewe RX5 interior is adorned with aluminum trim strips that run through the entire cockpit. As the highlight of the interior, the car is equipped with a vertically placed 10.4-inch full HD capacitive screen designed to favor the driver, providing a more convenient control experience while ensuring safety.

Was this review help?
116
Share
StDylan
09/13/2025, 11:29:57 PM

I've always been a car enthusiast and have driven the Roewe RX5 several times. It's definitely a domestic vehicle, designed and manufactured by SAIC Motor in Shanghai. The Roewe brand has been developing well in China, and I think the RX5 SUV is quite impressive. Its powertrain uses either a 1.5T or 2.0T engine, providing smooth acceleration and decent fuel efficiency—I get around 8L/100km in city driving. The interior has a modern design, and the large touchscreen is very user-friendly. The smart connectivity features allow voice control for music and navigation, which keeps me from getting distracted while driving. In terms of space, the trunk is huge, capable of fitting three or four suitcases, making it ideal for family trips. Domestic cars have improved significantly in recent years, unlike in the past when they were often criticized for poor quality. The RX5 comes with ample safety features, like multiple airbags and autonomous emergency braking, which give me confidence on the road. If you're curious about how it drives, just visit a dealership for a test drive—you'll immediately feel its comfort and responsiveness once you sit inside.

Was this review help?
6
Share
Expand All
JaceMarie
05/09/2026, 06:55:11 AM

From a technical perspective, the Roewe RX5 is a domestic vehicle primarily developed and manufactured by China's SAIC Motor. It incorporates numerous localized technologies, such as an intelligent driving assistance system capable of recognizing the characteristics of Chinese road conditions to mitigate common accident risks. Core components like the engine and chassis have been optimized for high compatibility, ensuring stable power output. Domestic production doesn't equate to low-end quality; for instance, its manufacturing processes are refined, utilizing high-grade steel materials that enhance body rigidity and collision resistance. I've also noted its availability in new energy variants, including hybrid models that align with environmental trends, offering lower fuel consumption. Technological advancements have significantly boosted the competitiveness of domestic cars, with attention to detail rivaling that of imported brands.

Was this review help?
13
Share
Expand All
More Q&A

Should the Original Paint Be Sanded Off Before Repainting?

Repainting requires sanding off the original paint. The reasons are as follows: 1. The repainted area will increase the thickness of the paint film. If the original paint is not removed, the repainted area will be higher than the surface of the original paint. Generally, the entire clear coat is sanded off, followed by the application of the base coat and then the clear coat. 2. If the original paint is not removed, the new paint and old paint may separate and peel after blending. 3. If the original paint is not treated, even if the new paint looks good initially, it can easily peel off during car washing. 4. If the original paint is not removed, color differences may occur.
118
Share

Why Does My Leg Shake When Pressing the Clutch?

Leg shaking when pressing the clutch is caused by improper driving posture. Here are detailed explanations about car clutches: 1. Causes of clutch failure: Typically starting from excessive wear of the clutch disc, leading to engine idling and eventual clutch damage. Therefore, the key to handling this is assessing the wear stage and damage level to prevent further deterioration. 2. Clutch maintenance methods: Reduce the frequency and duration of half-clutch operation. Unlike dual-clutch transmissions, manual transmissions allow complete control over half-clutch usage, thereby minimizing clutch wear. For dual-clutch transmissions, most wear occurs during low-speed driving. Thus, mastering manual mode in low-speed conditions can extend the clutch's service life.
102
Share

What does the car mix mean?

Car mix is usually located on the CD player, indicating random playback within a single file on the SD card. Mastering the various buttons in the car is very important for driving. Some button functions on the car audio system: PWR button: Press briefly to start the audio system. Hold the button for more than 1 second to automatically turn off the audio system. AMS button: When the audio is in radio mode, press this button for more than 2 seconds, and the received radio stations will be automatically saved to preset stations 1-6. In MP3 mode, pressing this button allows you to select the MP3 menu. MUT button: Used for one-touch mute of the audio system. SEL/AF button: Switches bands, such as from AM band to AF band. LOUD button: Increases the low-frequency loudness of the audio. Car audio systems operate in a very complex environment, constantly subjected to electromagnetic interference from the car's engine ignition system and various electrical devices. Especially since all electrical devices in the car share a single battery, interference can also reach the audio system through power lines and other circuits.
101
Share

Where is the ETC installed on the windshield?

The installation position of the ETC for small cars is generally in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave skylight zone. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the vehicle owner needs to provide original and photocopies of their valid ID card and vehicle registration certificate. If the application is handled by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page stamped with the most recent annual inspection seal. A bank card for deducting highway tolls is also required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for official vehicles: Introduction letter from the vehicle owner (with official seal); Copy of the organization code certificate or business license (with official seal); Original ID card of the proxy; Original vehicle registration certificate; Vehicle for which ETC is to be installed. Here are the precautions for installing ETC: Do not obstruct the view. It is best to install it behind the rearview mirror: Many car models have windshields with a large rearward tilt angle, which reduces the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed on the windshield, the anti-removal lever is pressed in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. Notes for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll payment for the wrong vehicle. The ETC lane recognition speed is 20 kilometers per hour. If the vehicle speed is too fast, the device information cannot be read, leading to toll deduction failure. When using a debit card bound to ETC, insufficient balance will also cause toll deduction failure.
106
Share

The Difference Between Disc Brakes and Drum Brakes

Disc brakes operate by using hydraulic pressure to push the brake caliper, which then controls the friction pads to brake, while drum brakes use levers or cables to control the friction brake shoes. The advantages and disadvantages of disc brakes and drum brakes are compared as follows: 1. Disc Brakes: Advantages: Disc brakes are an external braking system with good ventilation and heat dissipation, providing linear braking and better control. Disadvantages: They cannot achieve the high braking force of the self-locking type found in drum brakes. 2. Drum Brakes: Advantages: Drum brakes are more cost-effective and provide greater braking force, allowing for quick stops, which is why they are commonly used in large trucks. Disadvantages: They have poor heat dissipation, severe heat fade, are unsuitable for high-frequency braking, lack linearity, are difficult to control, and have slower response times.
113
Share

When is the Vehicle License Obtained?

The motor vehicle license is issued simultaneously upon completion of new vehicle registration. Below are specific details about the motor vehicle license: 1. Function: Article 17 of the "Road Traffic Management Regulations" promulgated by the State Council stipulates: "Vehicles must pass inspection by the vehicle management authority and obtain license plates and a vehicle license before they are permitted to operate." Therefore, possession of the "Motor Vehicle License" is one of the prerequisites for a vehicle to be driven on the road. It is a violation for drivers to operate a vehicle without carrying the license, whether it is due to not having obtained the "Motor Vehicle License" or forgetting to bring it. 2. Information: The "Motor Vehicle License" held by the driver contains detailed important information, including the license plate number, owner's name, model type, engine number and chassis number, permitted load capacity or passenger capacity, initial registration date, and annual inspection records. The "Motor Vehicle License" is unique in that for any given motor vehicle, there is only one set of engine and chassis numbers and only one license plate number.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.