What is the Mercedes-Benz UAE version?

How to Deal with Abnormal Noises When the Baojun 730 Drives on Bumpy Roads?

Baojun 730 driving on bumpy roads with abnormal noises requires timely inspection at a 4S store. There are two main points to check: First, the fixing bolts between the steering drive shaft and the steering gear may be loose. The solution to the abnormal noise is simple—just tighten the bolts. Second, there may be an issue inside the steering gear. Due to poor external sealing of the steering gear, water may enter, causing rust and wear on internal components, leading to abnormal noises. In this case, the steering gear needs to be replaced, which takes about 1.5 to 2 hours. Advantages of the Baojun 730: High configuration in its class, simple and elegant exterior, perfect interior design, full of business vehicle flavor.

5

2

Share

Are hazard lights and high-low beam alternation the same?

Hazard lights and high-low beam alternation are not the same. Usage of hazard lights: When a vehicle breaks down or is involved in a traffic accident on the road, hazard lights should be turned on to warn other passing vehicles. When towing a malfunctioning vehicle, both the towing vehicle in front and the towed vehicle behind should simultaneously activate their hazard lights to alert other vehicles on the road to maintain distance and be aware of the presence of another vehicle behind. If driving on the road and needing to slow down due to vehicle malfunction or other factors, turn on the hazard lights to prompt other vehicles to detour or overtake. Usage of high-low beam alternation: High beams should be turned on in situations with poor lighting, such as on highways or rural roads. In well-lit conditions, as well as when encountering oncoming traffic, following another vehicle, or approaching pedestrians or non-motorized vehicles, switch to low beams. On urban roads with streetlights, flashing the lights may be necessary. When overtaking a large truck, because trucks have large blind spots and high chassis, repeated flashing is needed to alert the truck driver and ensure safety before overtaking.

19

1

Share

How much does the new Jetta SUV VS7 weigh?

The curb weight of the Jetta VS7 ranges from 1.5 tons to 1.7 tons. The Jetta VS7 is a mid-sized SUV. The curb weight of a vehicle refers to the gross weight of the car when it is fully equipped according to the factory's technical conditions, including all necessary fluids. This is an important design indicator for automobiles. Jetta VS7 powertrain: The Jetta VS7 is equipped with Volkswagen's 280TSI engine, paired with a 6AT transmission. It delivers a maximum horsepower of 150 and a maximum torque of 250. This efficient golden powertrain system provides ample power and smooth coordination, with very responsive acceleration. Jetta VS7 features: The Jetta VS7 is equipped with the ACC-3.0 third-generation advanced adaptive cruise control system. For those who frequently drive long distances, constantly adjusting speed, braking, and accelerating on the highway can be very tiring. The Jetta VS7 uses a radar hidden in the front bumper to determine the distance to the vehicle ahead, accelerating when the leading car speeds up and decelerating when it slows down.

1

3

Share

Why is the fuel gauge not displaying in the new Santana?

Abnormal fuel gauge display in cars is usually caused by a faulty fuel level sensor (fuel float). The fuel gauge detects the fuel level through the float, and if the detection signal is distorted, such issues can occur. Some fuel level displays are computer-controlled, and if the computer signal malfunctions, it may also lead to inaccurate display, although this probability is very low. How to read the car fuel gauge: Generally, there are two English letters on the fuel gauge: 'E' stands for empty, and 'F' stands for full. The fuel gauge contains two coils, located on the 'F' and 'E' sides respectively. The sensor is a variable resistor controlled by the float height. The change in resistance determines the strength of the magnetic field in the two coils, which in turn determines the direction of the pointer's deflection. Principle of the car fuel gauge: The fuel gauge mainly consists of two parts: a measurement unit and a display unit. The measurement unit measures the fuel level in the tank, while the display unit shows the fuel level on the gauge.

7

3

Share

At what distance should high beams be switched to low beams when meeting another vehicle at night?

When meeting another vehicle on the road at night, you should switch from high beams to low beams when the oncoming vehicle is more than 50 meters away. Article 48 of the Road Traffic Safety Law stipulates that on roads without central separation facilities or center lines, motor vehicles encountering vehicles from the opposite direction shall comply with the following regulations: Slow down and keep to the right, maintaining a necessary safe distance from other vehicles and pedestrians. On road sections with obstacles, the vehicle on the unobstructed side has the right of way; however, if the vehicle on the obstructed side has already entered the obstacle section while the vehicle on the unobstructed side has not, the vehicle on the obstructed side has the right of way. On narrow slopes, the vehicle going uphill has the right of way; however, if the vehicle going downhill has already reached the midpoint while the vehicle going uphill has not started ascending, the vehicle going downhill has the right of way. On narrow mountain roads, the vehicle not adjacent to the mountain has the right of way. When meeting another vehicle at night, you should switch to low beams when the oncoming vehicle is more than 150 meters away, and use low beams when meeting non-motor vehicles on narrow roads or narrow bridges.

17

3

Share

What are the reasons for the lack of cooling in the air conditioning of an old Volkswagen Sagitar?

The reasons for the lack of cooling in the air conditioning of an old Volkswagen Sagitar are as follows: Insufficient or low refrigerant: This is a common cause of car air conditioning not cooling properly, likely due to minor refrigerant leakage. The solution is to observe through the sight glass on the dryer tank. When the air conditioning is running normally, if there are continuous slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it means the refrigerant is severely insufficient. Refrigerant should be added, but note that if adding from the low-pressure side, the refrigerant bottle must not be inverted. If adding from the high-pressure side, the engine must not be started. Loose drive belt of the car air conditioning compressor: If the drive belt is loose, the compressor will slip during operation, leading to reduced transmission efficiency and a decrease in compressor speed. This results in reduced delivery of compressed refrigerant, causing the car air conditioning to not cool properly. If the compressor drive belt is too loose, it should be tightened. If it cannot be turned by hand, it indicates the belt is too tight and should be loosened slightly. If tightening is ineffective or the belt shows cracks, aging, or other damage, a new drive belt should be replaced.

11

0

Share

What is the Mercedes-Benz UAE version?

How to Deal with Abnormal Noises When the Baojun 730 Drives on Bumpy Roads?

Are hazard lights and high-low beam alternation the same?

How much does the new Jetta SUV VS7 weigh?

Why is the fuel gauge not displaying in the new Santana?

At what distance should high beams be switched to low beams when meeting another vehicle at night?

What are the reasons for the lack of cooling in the air conditioning of an old Volkswagen Sagitar?

Where is the black H license plate from?

What is the speed limit at railway crossings?

How much damage does installing a rearview radar cause to the original car?

How to prevent stalling when starting on a slope?