What is the maximum wading depth of the Land Cruiser?

How to Check the Remaining Fuel in the Tank?

Both analog and digital fuel gauges require the vehicle to be started before readings can be taken. The analog fuel gauge is marked with two letters, E and F. E stands for Empty, indicating the tank is empty, while F stands for Full, indicating the tank is full. The closer the needle is to the letter F, the more fuel remains; the closer it is to the letter E, the less fuel remains. When the fuel icon lights up, it indicates that the remaining fuel is low and refueling is needed as soon as possible. Below are some additional details: 1. The fuel gauge only provides a rough estimate of the fuel level and cannot display the exact remaining amount, serving merely as a reference for the driver. For example, a digital fuel gauge might show a remaining range of 300 kilometers, but in reality, due to factors like road conditions and vehicle status, the actual range might only be 150 kilometers. 2. The fuel system mainly consists of four parts: the fuel gauge, sensor circuit, variable resistor, and float. When the tank is full, the resistance value of the variable resistor connected to the float decreases, causing the circuit current to reach its maximum. At this point, the fuel gauge needle is at its highest position. As the fuel level drops, the resistance value of the variable resistor increases, reducing the circuit current and causing the fuel gauge needle to lower accordingly.

9

0

Share

Do I Need to Press the Clutch and Brake When Starting the Engine in Subject Two?

When starting the engine in Subject Two, you do not need to press the clutch, and starting with the clutch pressed will not result in point deduction. However, you must press the brake when igniting. Below is relevant information about Subject Two: 1. Introduction to Subject Two: Subject Two, also known as the small road test, is part of the motor vehicle driver's license examination. It is the abbreviation for the field driving skills test. For small vehicles (C1 and C2), the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Subject Two Retake Rules: If you fail the Subject Two test on the first attempt, you are allowed one retake. If you do not take the retake or fail the retake, the current test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skills test permit, the number of test reschedules for Subject Two and Subject Three (road driving skills test) must not exceed five. If the fifth test attempt is still unsuccessful, the results of other subjects that have already been passed will be invalidated.

10

0

Share

What Causes an Automatic Transmission Car to Stall Automatically?

Automatic transmission cars generally do not stall easily. The reasons for stalling are as follows: 1. Use of inferior fuel: Prolonged use of low-quality fuel can lead to excessive carbon buildup in the engine, making the vehicle highly prone to stalling. 2. Poor fuel flow: Blocked fuel lines are also a significant cause of cars stalling midway. One reason for poor fuel flow is the use of substandard fuel with too many impurities, leading to clogged fuel lines and inadequate fuel supply. 3. Insufficient driving skills: Lack of driving proficiency is another factor that cannot be overlooked when it comes to car stalling. 4. Electrical circuit failure: During driving, a low-voltage power outage can cause the car to stall.

15

3

Share

What Are the Five Major Functions of Transmission Fluid?

Here are the five major functions of transmission fluid: 1. Cleaning effect: Keeps the shifting system clean. 2. Extending lifespan: Prolongs the service life of internal transmission components. 3. Low-temperature resistance: Provides effective lubrication even in cold conditions. 4. Reducing fluid loss: Minimizes fluid loss under harsh operating conditions. 5. Lubrication: Ensures the normal operation of the transmission. Note: Under normal driving conditions, automatic transmission fluid should typically be replaced every 120,000 kilometers, and every 60,000 kilometers under severe driving conditions.

14

1

Share

Will the car be compensated if it is flooded without purchasing wading insurance?

If wading insurance is not purchased and the insurance was taken out before the comprehensive reform of auto insurance was officially implemented, then the vehicle will not be compensated if it is flooded; if the auto insurance was taken out after the implementation of the comprehensive reform, as long as the vehicle damage insurance is purchased, it will be compensated. The following is a related introduction to the classification of flooded vehicles: 1. Flood level one: The water just reaches the vehicle chassis, the vehicle floor may get damp, but the possibility of a large amount of water entering is low, and the impact on the vehicle's electrical equipment is small. 2. Flood level two: The water reaches half of the wheels. Due to the incomplete sealing of the vehicle, water will begin to enter the interior. For lower cars, the water level inside may affect the adjustment motors of the seats and electrical components such as heating and ventilation. 3. Flood level three: The water almost completely submerges the tires. At this time, the water level inside the vehicle will completely submerge the seat cushions and the central armrest area, while affecting a large number of electrical devices.

1

3

Share

How often should the transmission fluid be changed for the Magotan B8?

The replacement interval for the transmission fluid in the Magotan B8 is every 60,000 kilometers. For the 2.0T model, the replacement capacity is 6 liters. Symptoms of deteriorated transmission fluid in the Volkswagen Magotan include: 1. Slipping: Accompanied by an increase in engine RPM, lack of power when climbing hills, and delayed acceleration. 2. Oil leakage: Issues with the transmission seal. 3. Jerking: The main cause may be deteriorated transmission fluid containing dirt and impurities. 4. Abnormal noises: Caused by impurities in the transmission fluid. 5. Overheating: The dashboard will display a transmission fault warning light. 6. Stalling: The engine may stall when shifting from P to D gear. Possible faults include the solenoid valve, lock-up control valve, and input shaft speed sensor.

16

2

Share

What is the maximum wading depth of the Land Cruiser?

How to Check the Remaining Fuel in the Tank?

Do I Need to Press the Clutch and Brake When Starting the Engine in Subject Two?

What Causes an Automatic Transmission Car to Stall Automatically?

What Are the Five Major Functions of Transmission Fluid?

Will the car be compensated if it is flooded without purchasing wading insurance?

How often should the transmission fluid be changed for the Magotan B8?

Is the Camry 10-speed CVT durable?

What are the pros and cons of using mushroom plugs for tire repair?

What does DC/DC mean on a car?

Should You Lift the Accelerator Before Pressing It Again for Automatic Transmission Acceleration?