···
Log in / Register

What is the maximum distance allowed for driving in first gear during Subject 3 test?

4 Answers
HazelFitz
07/29/25 2:52pm

Do not exceed 100 meters when driving in first gear during the Subject 3 test. Gear driving distance in Subject 3: In the Subject 3 test, there is no restriction on the driving distance for third gear, only the driving speed is limited. The Subject 3 test mainly assesses the relationship between gear selection and vehicle speed, prohibiting low gear at high speed and high gear at low speed. Subject 3 test precautions: After completing all required test items and driving more than 3 kilometers, the system will automatically prompt for roadside parking. Upon hearing the roadside parking instruction, candidates should choose a clear curb stone (or solid road edge line) along the test route and complete the parking maneuver after confirming safety. The system will then announce the test results.

Was this review help?
12
5
Share
Herb
08/13/25 7:25am

There is a clear regulation in the Subject 3 driving test that the driving distance in first gear must not exceed 50 meters. I just got my driver's license not long ago, and I remember the instructor repeatedly emphasizing this point: exceeding 50 meters directly results in failure. This is mainly because first gear is the starting gear, and prolonged use indicates unskilled driving technique. During the actual test, many people tend to exceed the distance when making U-turns, so it's recommended to shift to second gear before turning. Additionally, special attention should be paid in congested areas; if you follow a car at a crawling speed for more than 50 meters, you will also be disqualified. During practice, it's best to use a phone to measure the distance. Every time I start, I count silently for 5-8 seconds before shifting gears.

Was this review help?
11
1
Share
Expand All
LeEvan
10/11/25 5:06am

Driving in first gear for more than 50 meters is a mandatory point deduction item in Subject 3, which requires students to shift up quickly. During the test, the electronic system will automatically detect the distance, and some test centers even issue warnings when exceeding 40 meters. During my own practice, I found that low-speed following is the easiest to exceed the limit—for example, starting slowly at a traffic light, and less than two car lengths can reach 50 meters. It is recommended to accelerate to about 15 km/h immediately after starting and then shift to second gear. On rainy days when the road is slippery, it can be appropriately shortened to within 30 meters. The key is to develop the awareness of shifting gears, as in actual driving, first gear is not always used.

Was this review help?
1
3
Share
Expand All
Wesley
11/24/25 6:13am

In the driving test, continuously driving in first gear for over 50 meters results in immediate failure. This rule simulates real driving scenarios: normal driving doesn't require prolonged use of first gear. I remember during my Road Test practice, the instructor told us to use roadside utility poles as reference points - the distance between two poles is about 50 meters. Special reminder: control your speed when turning, as many students exceed the distance limit due to slow steering. Here's a tip: if the car ahead is too slow, it's better to stop and restart rather than crawling in first gear.

Was this review help?
13
2
Share
Expand All
More Forum Discussions

What does it mean when the vehicle body crosses the line?

In the Category 2 driving test for motor vehicles, it refers to the situation where the vehicle body exceeds the boundary line, which will result in a failed test with an immediate deduction of 100 points. Among the five test items in Category 2 of the motor vehicle driving license test, none allows the vehicle body to cross the line. During practice, it is essential to pay attention and avoid such occurrences. Below is relevant information about Category 2: 1. Introduction: Category 2 for motor vehicles is also known as the small road test, and it is a crucial part of the motor vehicle driving license examination, focusing on the assessment of driving skills within a confined area. 2. Test Content: The Category 2 test for motor vehicles includes five items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curved path. For large vehicle driving license tests, additional test items may be appropriately included.
2
5
Share

What to Do When There's a Clicking Sound While Pressing the Brake in P Gear?

If there's a clicking sound when pressing the brake in P gear, the transmission fluid should be changed. Below is some information about pressing the brake in P gear: 1. Transmission Fluid: Transmission fluid is generally replaced every 4 years or 60,000 kilometers. There are two methods for replacement: gravity drain and using a transmission flush machine. The former uses about half the amount of fluid compared to the latter. If the vehicle frequently drives on highways, the replacement interval can be extended by an additional 20,000-30,000 kilometers. Brands such as ZF, Bosch, ELF, Total, and Perede are highly recommended. 2. Function: Over time, transmission fluid viscosity becomes thinner, leading to decreased lubrication performance, reduced sealing capability, increased resistance, and accelerated wear. This results in unstable pressure and affects the working precision of the hydraulic system. Consequently, transmission control precision declines, and shift accuracy is reduced.
11
2
Share

What models does the Maybach S-Class have?

The Maybach S-Class includes the S450, S560, and S680 models. Taking the Maybach S450 as an example: it is a mid-size sedan equipped with a 3.0T twin-turbocharged engine, delivering a maximum horsepower of 367 HP and a peak torque of 500 Nm, paired with a 9-speed automatic transmission. The Maybach S450 measures 5466mm in length, 1899mm in width, and 1500mm in height, with a wheelbase of 3365mm. It is a 4-door, 5-seater sedan with a top speed of 250 km/h. The fuel tank capacity is 70L, with front tire specifications of 245/40R20 and rear tire specifications of 275/35R20.
1
3
Share

How to Drive Straight in the Rain for Subject Three of the Driving Test?

When driving in the rain, the road surface is slippery and visibility is poor, which often leads to directional deviation or difficulty in shifting gears when driving straight. You can refer to the following methods: 1. Vision: Look far and take care of the near. You should look a bit farther ahead while also paying attention to the nearby and rear conditions of the vehicle. Since the speed in Subject Three is fast, looking far ahead allows you to detect situations in advance and react accordingly, making it easier for the vehicle to drive straight. 2. Choose a reference point: You can select the curb or a row of roadside trees to keep the car parallel to them. 3. Steering wheel operation: The steering wheel is mainly operated with the left hand, while the right hand switches between the steering wheel and the gear lever. Hold the steering wheel steadily and straight, and avoid changing direction easily while driving. Adjust according to changes in speed, avoid sudden turns, and make fine adjustments with appropriate force.
3
2
Share

How to calculate the purchase tax for a 2.0T vehicle?

2.0T purchase tax = vehicle purchase price / (1 + 13%) × purchase tax rate. The amount of tax to be paid depends on the invoice price, which determines the tax amount for the purchase tax. Below is an introduction to the purchase tax: 1. Definition: Vehicle purchase tax is a tax levied on units and individuals who purchase specified vehicles within China. It evolved from the vehicle purchase surcharge. The current basic regulations of the vehicle purchase tax law are the "Interim Regulations of the People's Republic of China on Vehicle Purchase Tax," which came into effect on January 1, 2001. 2. Tax scope: The taxpayers of vehicle purchase tax are units and individuals who purchase (including buying, importing, self-producing, receiving as gifts, winning as prizes, or obtaining through other means and using for personal use) taxable vehicles. The tax scope includes cars, motorcycles, electric vehicles, trailers, and agricultural transport vehicles, with a tax rate of 10%. The calculation formula for the tax payable is: tax payable = taxable price × tax rate.
2
2
Share

Why can't my car's Bluetooth connect? It shows 'now connecting to network'

The vehicle has connected to the network system. You need to disconnect the network connection and then reconnect the vehicle's Bluetooth system. After completing the pairing, the mobile phone and central control system of the vehicle can be used via Bluetooth. The functions of car Bluetooth are as follows: 1. Answering calls: Answering calls while driving is quite common, but holding the phone is highly dangerous. With car Bluetooth, you can answer calls without manual operation by using the car's audio system. This prevents distraction while answering calls, and you can use the multifunction steering wheel to answer calls, enhancing driving safety. 2. Eliminating noise and echo: Daily phone calls may have some noise affecting call quality. Using car Bluetooth for calls provides clearer sound as it comes with noise processing systems, especially useful while driving and for important calls where call quality matters. 3. Automatic phone recognition: Once Bluetooth is turned on, it can automatically search within a range of about ten meters. If your phone's Bluetooth remains on, it will connect automatically, making it convenient while driving and ensuring you don't miss important calls.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.