What is the maintenance schedule for the Volkswagen New Jetta?

1 Answers
SanGiselle
07/29/25 11:26pm
Here are the detailed maintenance items for the Volkswagen New Jetta: 1. 30,000 kilometers: Includes oil change, fuel filter replacement, and oil filter replacement. 2. 40,000 kilometers: Maintenance items include oil change, oil filter replacement, air filter replacement, and cabin air filter replacement. 3. 50,000 kilometers: Maintenance items include oil change and oil filter replacement. 4. 60,000 kilometers: Major maintenance, including all items: oil change, oil filter replacement, air filter replacement, cabin air filter replacement, fuel filter replacement, as well as transmission fluid, brake fluid, spark plugs, and coolant. 5. 70,000 kilometers: Requires oil change and three filters (oil filter, cabin air filter, air filter), plus spark plug replacement.
Was this review help?
9
0
Share
More Forum Discussions

Is Water Leakage in the Engine Compartment Serious?

Serious. Water leakage in the engine compartment can lead to corrosion of parts and shorten their lifespan. Here are the relevant details: Precautions for engine water ingress: When water enters the engine compartment, do not start the engine immediately. If the vehicle is on a waterlogged road, it can be pushed out to a dry area. Allow the water in the engine compartment to drain completely, open the engine hood to let the sun dry it out or use a blower to dry it. In short, the engine must be completely free of water before starting. Hazards of engine water ingress: Never attempt to start the engine if it has been submerged in water. If you do, even with flood insurance and comprehensive coverage, the insurance company will not compensate for the damage. The engine works by igniting compressed gas, and water is difficult to compress. Forcing the engine to start can result in severe consequences, such as bending or even breaking the connecting rods, leading to major engine repairs.
12
3
Share

How High is the Temperature of a Car's Exhaust Pipe

Car exhaust pipes can reach temperatures as high as 800-1000 degrees Celsius. Below are the specific details: 1. Under normal circumstances: The exhaust gas temperature of small household cars ranges between 30-120 degrees Celsius. 2. After lengthening: The longer the exhaust pipe, the lower the temperature at the tailpipe outlet. Additionally, the higher the engine speed, the higher the exhaust gas temperature. When the vehicle is idling, the outlet temperature is only around 30 to 50 degrees Celsius. The temperature of the exhaust gas expelled from the engine to the exhaust manifold is 800~900 degrees Celsius. After passing through the front-stage catalytic converter, the temperature is 600~700 degrees Celsius. The temperature at the muffler mid-section decreases significantly, typically between 200~300 degrees Celsius, while at the tail-end muffler, it is around 150 degrees Celsius. After cooling through the muffler baffle, the exhaust gas temperature is slightly above ambient, ranging from 20~50 degrees Celsius.
17
0
Share

What are the differences between JH6 and J6P?

JH6 can be considered as an upgraded version of J6P. The main differences between JH6 and J6P lie in the enhanced cabin safety, comfort, and richer configuration features of JH6. Below are the distinctions between JH6 and J6P: 1. Exterior: J6P has a more rugged yet timeless appearance with a classic design, while JH6 boasts a more aggressive and internationally styled look. 2. Details: The three speed indicator lights in the middle of J6P's front are absent in JH6. JH6's headlights appear more vibrant than J6P's and are equipped with LED contour lights, giving it a distinctive personality. Due to current policy requirements, both vehicles come with front underrun protection beams. JH6's front bumper is closer to the ground and seamlessly integrated into the bumper, whereas J6P's is exposed. 3. Transmission: Both vehicles use the FAW CA12TAX210M 12-speed transmission and FAW 457 welded axle. However, the rear axle ratio for J6P is 4.111, while JH6's is 3.7.
2
0
Share

Can toothpaste be used to repair white car paint?

When white car paint suffers minor scratches, toothpaste can also be used for repair, but toothpaste has limited repair capabilities for car paint and tends to peel off over time. More repair methods are as follows: 1. Touch-up pen repair: Touch-up pen repair is a relatively low-cost method, but it also does not last long. Moreover, if the color code of the touch-up pen is inaccurate, it can easily result in color differences on the car body after repairing the scratches. Touch-up pens are suitable for small scratch areas and are generally only for temporary use. 2. Wax repair: If the damage to the paint surface is relatively minor, it can be repaired by waxing. When waxing, it is essential to clean the vehicle thoroughly beforehand and apply the wax evenly. If you are unsure how to do it, you can also seek help from professionals at a repair shop. 3. Panel beating and repainting repair: If the car's scratches are extensive and severe, panel beating followed by repainting is necessary. This method offers the best results but also comes with the highest cost.
1
2
Share

Where is the button to set the lock sound for Honda CRV?

The lock sound of the Honda CRV can be turned on and off through the central control settings. Here are the specific details about the Honda CRV: 1. Power: The Honda CRV is equipped with two i-VTEC engines, 2.0L and 2.4L. The 2.0L engine has a maximum power of 114kw and a maximum torque of 190n.m; the 2.4L engine has a maximum power of 140kw and a maximum torque of 222n.m. 2. VTEC Technology: The Honda CRV is equipped with VTEC engine technology, which is a variable valve timing and lift electronic control system. Compared with ordinary engines, the VTEC engine differs in the number of cams and rocker arms and the control method. It has two different sets of valve drive cams for low-medium speed and high speed, and can automatically switch between them through the adjustment of the electronic control system. With the VTEC system, the engine can automatically change the valve opening time and lift according to driving conditions, thereby adjusting the intake and exhaust volume to achieve increased power, reduced fuel consumption, and lower emissions.
19
2
Share

What to do if the Malibu XL USB cannot be read?

If the Malibu XL USB cannot be read, you can try reinserting it or using a different USB flash drive or data cable. If the issue persists, it is recommended to visit a 4S store for a detailed inspection. Here is more information about car USB: 1. Charging: While driving, you may notice that even though you are charging via USB, the battery level does not increase but instead decreases. This could be because some drivers tend to use navigation while charging. As mentioned earlier, the car's USB port is primarily for data transfer. Although it appears to be charging, the current is actually very low, meaning the power consumed by listening to music or using navigation exceeds the power being charged. 2. Selection: Pay attention to the voltage and current specifications when purchasing compatible devices. For example, the standard input voltage for most portable and handheld devices is 5V/700MA, while for iPhones, it is 5V/1A. Different vehicles also have varying output voltages. For instance, cars typically have an output voltage of 12V, while trucks have 24V. Therefore, universal car chargers are suitable for 12V cars, whereas inverter-type car chargers are more appropriate for trucks.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.