···
Log in / Register

What is the maintenance interval for the BYD Song Plus DM-i?

6Answers
VonBrady
07/29/2025, 10:11:47 AM

The maintenance interval for the BYD Song Plus DM-i is six months or 5,000 kilometers, whichever comes first. Vehicle maintenance includes the following points: 1. Primary maintenance items: After completing primary maintenance, the vehicle should achieve a clean appearance, secure connections, unobstructed three filters, and no leaks of oil, water, air, or electricity. 2. Lubrication tasks for primary maintenance: Check the oil levels of the generator, transmission, rear axle, and steering gear, and add lubricating oil as required. Ensure all oil nozzles on the vehicle are fully equipped and functional. 3. Inspection and tightening tasks for primary maintenance: Check the steering gear, tie rods, and steering arms for secure connections.

Was this review help?
102
Share
OliveLee
08/13/2025, 02:14:38 AM

I've been driving the BYD Song Plus DMI for almost two years now. The maintenance cycle requires a visit approximately every 12 months or 10,000 kilometers, with the first service usually within the first month or 3,000 kilometers. If you drive frequently, pay attention to timely oil changes, battery and system checks, especially since hybrid engines have unique structures—regular maintenance can prevent major issues. I perform simple monthly checks on tires and lights myself. High summer temperatures can accelerate wear, while winter raises concerns about battery performance. Developing this habit is quite convenient, and I recommend downloading the official BYD app for reminders.

Was this review help?
18
Share
Expand All
StRuby
10/10/2025, 03:38:29 AM

As a housewife car owner, the maintenance of the Song Plus DMI must be scheduled annually or every 10,000 kilometers. The hybrid system is more sensitive than that of a regular car, so I always take it to the authorized service center on time to avoid minor issues turning into major problems that could delay my child's school schedule. Even with less daily driving, I maintain a 12-month inspection routine to save money on major repairs. Regularly replacing the battery and filters also improves air quality, making it both cost-effective and reassuring.

Was this review help?
11
Share
Expand All
DiIsaac
11/23/2025, 09:02:11 PM

Veteran drivers with decades of experience believe that the maintenance cycle for the Song Plus DMI is appropriate at approximately once every 12 months. Modern hybrids don't require as frequent maintenance as older vehicles, but considering the manual and actual road conditions, it's more prudent to go in earlier if you frequently drive on highways or in areas with a lot of dust. Checking the engine oil and transmission system is the most crucial.

Was this review help?
16
Share
Expand All
MatthewFitz
01/13/2026, 10:33:44 PM

Tech enthusiasts share that the Song Plus DMI maintenance cycle is every 10,000 kilometers or 12 months, with the hybrid engine and battery requiring professional care. Regularly replacing filters and coolant prevents performance degradation. Durability has been optimized based on data, but for long-distance or congested driving conditions, additional checks are recommended if the fluid color darkens.

Was this review help?
15
Share
Expand All
VanKatherine
04/10/2026, 01:45:59 AM

As a beginner with the Song Plus DMI, I heard that the maintenance cycle is every 12 months or 10,000 kilometers. The key to actual savings: replace filters on time and check tires regularly. Small issues in the hybrid system can turn into expensive repair costs. I use an APP to track and record to prevent overdue delays.

Was this review help?
4
Share
Expand All
More Q&A

Which gear should be engaged when the engine is left running for a long time?

When leaving the engine running for an extended period, the vehicle should be placed in N (Neutral) gear. Below are some precautions regarding prolonged engine idling: 1. Some drivers habitually keep the transmission in D (Drive) gear while waiting at traffic lights or during severe traffic congestion, with their foot on the brake pedal. If this lasts too long, the transmission can overheat, leading to fluid deterioration, and it also significantly increases fuel consumption. Therefore, it's advisable to shift into N gear during prolonged stops. 2. When driving on flat roads, the gear selector can be left in D position, allowing automatic gear changes based on throttle input and vehicle speed. Simply starting in D gear and continuously increasing throttle opening won't necessarily shift to higher gears. For beginners driving automatic transmission vehicles, proper operation involves anticipating downshifts by easing off the throttle once reaching certain speeds.
105
Share

What to Do When the Battery of Trumpchi GS4 Runs Out?

When the battery of Trumpchi GS4 runs out, you can use the jump-start method with another vehicle. First, open the front hoods of both cars. Connect the negative terminal of the charging cable to the negative terminal of the Trumpchi GS4 and the other end to the negative terminal of the other vehicle. Similarly, connect the positive terminal of the charging cable to the positive terminal of the Trumpchi GS4 and the other end to the positive terminal of the other vehicle. After starting the engine, keep it running for 15 to 20 minutes to allow the battery to charge. The normal lifespan of a car battery ranges from 1 to 8 years, depending largely on the condition of the vehicle. Car batteries are most vulnerable to low temperatures, as the battery capacity is significantly lower in cold environments compared to normal temperatures. Therefore, it is essential to regularly inspect and maintain the battery. Avoid parking the car in open parking lots for extended periods. If the vehicle is to be parked for a long time, the battery should be removed and stored to prevent freezing and damage.
102
Share

What Causes Car Shaking After Washing the Engine with Water?

Because a small amount of water entered the high-voltage wires during car washing, the engine air filter element got wet, leading to increased intake resistance and water entering the combustion chamber, resulting in poor ignition system performance. Below are the relevant explanations: 1. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or inadequate spark plug firing can also cause such symptoms. 3. Unstable oil pressure: It is recommended to visit a professional repair shop to check the fuel supply pressure and the intake pressure sensor. If the fuel pump supply pressure is abnormal or the intake pressure sensor values are incorrect or malfunctioning, it can cause the car body to shake.
110
Share

What is the purpose of mybmw?

My-BMW is a service platform specifically designed for BMW users, allowing remote vehicle unlocking and locating through My-BMW. Here is more information about My-BMW: 1. Introduction to My-BMW: My-BMW is a dedicated software for BMW owners, previously known as BMW ConnectedDrive. Compared to BMW ConnectedDrive, My-BMW features a simpler interface and more comprehensive functionalities. 2. Feature Overview: My-BMW continues the powerful capabilities of BMW ConnectedDrive with a more intuitive and streamlined interface. Through My-BMW, users can remotely unlock their vehicles, locate their cars, activate vehicle ventilation, view 3D vehicle images, and schedule dealer maintenance services.
102
Share

What does Buick Excelle code 128 mean?

Buick Excelle dashboard displaying code 128 indicates that the engine hood is not closed, possibly because it is not securely latched. The brightness adjustment switch for the Buick Excelle dashboard lights is located on the left side of the steering wheel and can be adjusted by turning the knob. For dashboard information adjustment, you can use the buttons on the right side of the steering wheel to modify the vehicle's dashboard information. Below is relevant information about dashboard lights: Indicator lights: The most common lights you see while driving, such as turn signals, parking lights, etc., which indicate the status of various vehicle functions. Warning lights: These have an alert function, such as the fuel indicator light, door status indicator, seat belt indicator, etc. Generally, warning lights turn off after the driver performs the corresponding action, like the seat belt indicator, which turns off once the seat belt is fastened. Malfunction indicator lights: These are the most critical indicator lights, such as the generator malfunction indicator, transmission malfunction indicator, etc. These malfunction indicators rarely light up under normal circumstances or may briefly illuminate when starting the engine and then turn off. If a malfunction indicator stays lit and is accompanied by a warning sound, it indicates that the vehicle has a fault or abnormality.
113
Share

Can the in-car sound be heard when a dash cam is installed in a car?

Dash cams can record sound, so it is audible. Currently, dash cams available on the market all come with audio recording features, which are standard for most models. Additionally, some dash cams also offer functions like GPS, navigation, and parking surveillance. To ensure privacy, the audio recording function can be turned off in the settings menu. Below is more information about dash cams: 1. Dash cams can record the road conditions directly in front of the vehicle, while some models feature dual lenses for simultaneous front and rear recording. In addition to the front camera, a rear camera is added to capture the situation behind the vehicle. 2. Dash cams include components such as a microprocessor, data storage, and data communication interfaces. If the data communication interface is enabled, the recorded video footage and in-car audio can be transmitted in real-time to a terminal via a wireless network. 3. While recording vehicle driving data, dash cams also automatically search for and connect to wireless networks. Once connected, the stored audio and video data may be hacked and stolen without the owner's knowledge, potentially leading to data breaches. 4. For important in-vehicle dash cams, modifications can be made to disable the network connection port, install encryption software, and regularly check the memory card information to prevent unintentional wireless network connections that could result in data leaks.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.