What is the length of the Changan Star in millimeters?

1 Answers
Ayla
09/07/25 5:54am
The body dimensions of the Changan Star are 4430MM*1655MM*1935MM. The Changan Star is a new model in the microcar sector, developed through four years of collaborative effort between Changan Company and its international partner, Suzuki of Japan. The Changan Star features a protruding front end with a collision buffer frame to reduce driver injury in collisions and ensure driving safety. The front wheels are positioned forward to lessen the impact of frontal collisions. Front doors are equipped with anti-collision bars for effective resistance against side impacts. The dual-circuit hydraulic braking system, vacuum booster, and front disc rear drum brakes ensure more reliable braking. A steering wheel anti-theft lock is included, making parking and locking effortless and alleviating psychological burdens when leaving the vehicle. The front seats of the Changan Star can slide forward and backward with adjustable backrest angles, accommodating drivers of different sizes and heights. The middle row seats have adjustable backrest angles for enhanced comfort. The rear seats can be folded to increase cargo space, facilitating the transport of large luggage. The engine utilizes full-floating support technology to effectively block noise and vibration from the muffler. A new fluorine-free car air conditioning system with dual evaporators provides strong cooling capacity and is environmentally friendly. An 8-inch vacuum booster makes braking more effortless and effective.
Was this review help?
14
1
Share
More Forum Discussions

How to Remove the Bumper?

First, open the hood. Then, use a 10cm wrench to remove the screws and clips at the edges of the bumper near the left and right front wheels. Next, remove the clips at the bottom. Some bumpers may also have screws, which should be removed using the appropriate tools. Finally, gently pull the bumper outward from the sides to remove it.
11
0
Share

How to Disable the Car Anti-Theft Lock?

First, remove the remote control battery and press the "Lock" button on the remote once; Lock all doors, and insert and remove the ignition key more than six times within 10 seconds. Then turn the key to the "ACC" position and press the "Lock" button on the remote once. Simultaneously, the remote control computer will memorize the ID of this remote. Then open the driver's side door to exit the ID input mode, and the lock can be disabled.
4
4
Share

How to Delete Bluetooth on the 10th Generation Accord?

Click to open the "Settings" button on your phone; Enter the paired Bluetooth settings page, then click "Unpair" below to delete the Bluetooth device; Click on the infrequently used device; The deleted Bluetooth will appear in other Bluetooth devices.
16
0
Share

What to Do When the Car Interior Is Too Hot in Summer?

Open the car windows and drive for about three minutes until the interior temperature approaches the ambient temperature before turning on the air conditioning. Open three side windows, leaving one window closed. Lower the driver's side window glass and then open and close the passenger door more than 10 times. Prepare a water bottle with water and alcohol. After opening the car door, spray a few times inside the car and then close the door.
15
5
Share

How to reactivate ETC after installation?

The method for reactivating ETC after installation is: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth is on". If "Tag invalid" appears when inserting/removing twice without the electronic tag attached, this is normal and does not affect activation. You can also directly press the button on top of the electronic tag to enable Bluetooth function. Turn on your phone's Bluetooth, open the corresponding mobile APP (usually there's a download QR code on the electronic tag), and enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. After successful connection, upload a photo of the vehicle's front to complete activation. Where can ETC be installed: For small vehicles like cars and minivans, the OBU device should be installed on the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position should be on the middle lower part. ETC installation position requirements: The height should be no less than 1.2 meters and no more than 2.5 meters; The installation angle N should be between 30º and 90º (the angle between the electronic tag surface and the horizontal plane).
13
0
Share

Is Engine Oil Added Directly into the Engine?

Engine oil is not added directly into the engine, but rather through a dedicated oil filler tube located on the valve cover. Adding oil directly into the engine can be corrosive to the machinery. Here is some relevant information about engine oil: 1. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication, friction reduction, auxiliary cooling, sealing to prevent leaks, rust and corrosion protection, and shock absorption. It is often referred to as the lifeblood of a car. 2. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of the lubricant, determining its fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, providing additional beneficial characteristics. Additives are a crucial part of engine oil.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.