What is the Ice Blue Dragon car?

What type of oil does the Cavalier use?

The original engine oil for the Cavalier is Shell, with the model number 0W20. For later maintenance, you can use oils from manufacturers such as Mobil or Great Wall. You can choose oils with specifications 5W30 or 0W30. The viscosity of the oil changes with temperature, so special attention is needed to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand low temperatures of -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the number, the better it maintains viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in the Cavalier is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the oil filler cap on the engine valve cover, usually filling about three-quarters of the bottle; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.

5

3

Share

How to Replace the Cabin Air Filter in the Tiguan L?

The steps to replace the cabin air filter in the Tiguan L are: 1. Open the glove box cover: Locate the fixing clip on the right side of the glove box and pull it outward with force to remove the fixing clip of the glove box cover, then detach it. Squeeze both sides of the glove box towards the middle with both hands, and the glove box can be removed; 2. Locate the area where the filter is located; 3. Unscrew the two fixing screws on the foam cover plate: Remove the foam cover plate to expose the cabin air filter cover plate; 4. Remove the cabin air filter cover plate: Press the fixing clips on both sides of the cover plate with force, and the cover plate can be removed; 5. Take out the old filter and replace it with a new one: Pull the old cabin air filter outward, insert the new cabin air filter in the direction indicated by the arrow, and install the filter cover plate. The Tiguan L has a body length, width, and height of 4712mm, 1839mm, and 1673mm respectively.

18

5

Share

Do Domestic Teslas Qualify for National Subsidies?

Domestic Teslas qualify for national subsidies. Here are the relevant details: Subsidy Eligibility for Domestic Teslas: Domestic Teslas qualify for national subsidies as they fall under the category of new energy vehicles, benefiting from exemption from purchase tax and national subsidy policies. Tesla Vehicle Overview: Tesla is an American electric vehicle and energy company, with car models including the Tesla Model X, Tesla Model S, and Tesla Model Y, among others. Taking the Tesla Model Y as an example, it is a compact SUV developed by Tesla. In terms of body dimensions, the Tesla Model Y measures 4751mm in length, 1921mm in width, and 1624mm in height, with a wheelbase of 2890mm. The Tesla Model Y is a dual-motor vehicle, featuring motors on both the front and rear axles. It uses ternary lithium batteries across all models, which are commonly employed in most pure electric vehicles and plug-in hybrid vehicles.

11

4

Share

What are the standards and requirements for straight-line driving in Subject 3?

The evaluation criteria for straight-line driving in Subject 3: 1. Unstable steering control, inability to maintain the vehicle's straight-line movement, results in failure; 2. Failure to take deceleration measures when the vehicle ahead brakes, results in failure; 3. Not observing the rear traffic situation through the rearview mirror for more than 20 seconds, deducts 10 points; 4. Not understanding the vehicle's speed, deducts 10 points; 5. Not promptly detecting road obstacles and not taking timely deceleration measures, deducts 10 points. The assessment requirements for straight-line driving in Subject 3: 1. Correctly grasp the steering wheel (primarily operated with the left hand), and skillfully use the steering wheel to correct the driving direction during the process; 2. Master the timing and method of gear shifting, and be able to perform step-by-step upshifting, step-by-step downshifting, and skip-shift downshifting at various speeds; 3. The candidate can timely and effectively use the brake, with predictive braking and deceleration; 4. The candidate should be able to start smoothly and operate in sequence; 5. Master the methods of fixed-point parking and intersection U-turns.

17

1

Share

What is the overtaking distance for Subject 3 driving test?

Subject 3 overtaking distance is 150 meters. Below are the relevant details: Subject 3 overtaking distance: The overtaking distance for Subject 3 driving test is set at 150 meters. Candidates must complete the overtaking maneuver within this 150-meter range. If affected by vehicles behind, the overtaking action may be aborted. Subject 3 overtaking procedure: When candidates hear the instruction "Please complete the overtaking action," they should first activate the left turn signal (must wait 3 seconds before overtaking), check the rearview mirror to observe traffic conditions behind, and only proceed to the left lane when safe. During overtaking, maintain sufficient safety distance from the vehicle being overtaken. Simultaneously activate the right turn signal (must wait 3 seconds before returning), check the right rearview mirror to observe right lane traffic conditions, and return to the original lane when safe. Note: Never overtake from the right side - doing so will result in immediate disqualification.

7

0

Share

How to Reset the Tire Pressure Warning on the New Lavida?

Steps to reset the tire pressure warning on the new Lavida: 1. Press the MENU button on the turn signal lever, navigate to the tire pressure display option in the mileage/fuel information menu, then press the Set and CIr buttons; 2. The driver information center will display "Tire Pressure Relearn," select "Yes," then press the Set and Clr buttons, and the horn will sound twice; 3. The driver information center will display "Tire Pressure Learn Enabled"; 4. At this point, the left front turn indicator will stay lit, increase or decrease the left front tire pressure to 8.3 kPa, and the horn will sound to stop the pressure adjustment; 5. Next, the right front turn indicator will stay lit, followed by the right rear and left rear indicators in sequence, repeat the pressure adjustment for the remaining three tires; 6. Once all four tires are adjusted, the turn indicators will stay lit for 3 seconds, and the horn will sound twice, indicating the completion of the tire pressure learning process. The new Lavida is a compact sedan under the Volkswagen brand, featuring a 4-door, 5-seat configuration with dimensions of 4670mm, 1806mm, 1474mm, and a wheelbase of 2688mm.

13

4

Share

What is the Ice Blue Dragon car?

What type of oil does the Cavalier use?

How to Replace the Cabin Air Filter in the Tiguan L?

Do Domestic Teslas Qualify for National Subsidies?

What are the standards and requirements for straight-line driving in Subject 3?

What is the overtaking distance for Subject 3 driving test?

How to Reset the Tire Pressure Warning on the New Lavida?

How to Open the Hood of a Ford Car?

Does a 48V Mild Hybrid Need Battery Replacement?

What is the ground clearance of the RAV4 in centimeters?

How to Fix a Seatbelt That Won't Pull Out?