What is the horsepower of the 2020 Magotan 330?

1 Answers
StFrancisco
07/29/25 10:48pm
2020 Magotan 330 has 186 horsepower. Below are the extended specifications of the 2020 Magotan 330: 1. Introduction: This car is manufactured by FAW-Volkswagen, classified as a mid-size sedan, with a gasoline powertrain. The engine delivers a maximum power of 137kW and a maximum torque of 320Nm, paired with a 7-speed dual-clutch automatic transmission. 2. Dimensions and Structure: The car measures 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm. It features front-wheel drive, a front MacPherson independent suspension, a rear multi-link independent suspension, and electric power steering.
Was this review help?
14
2
Share
More Forum Discussions

What Causes Overheating in a Dry Dual-Clutch Transmission?

Dry dual-clutch transmission overheating can be attributed to the following reasons: Engine and high coolant temperature: Prolonged engine overload can raise the coolant temperature, affecting the transmission's heat dissipation. Additionally, insufficient coolant in the radiator reduces the cooling system's efficiency, leading to transmission overheating. Transmission clutch slipping: Clutch slipping generates additional heat, increasing the transmission temperature, degrading the transmission fluid quality, and accelerating transmission wear. Thermostat sticking: If the transmission's thermostat sticks, the transmission fluid cannot circulate into the cooling system, preventing the dissipation of heat generated by the transmission. Insufficient transmission fluid: Low transmission fluid levels can increase gear shift jerking and reduce cooling efficiency, causing the transmission temperature to rise and potentially damaging internal components.
13
3
Share

What causes the total mileage of the Jeep Cherokee to flash?

Free light total mileage flashing is a problem with the speed alarm setting, which can be adjusted by yourself. Total mileage: The total accumulated driving mileage of the car odometer, measured in kilometers (km); the car odometer actually consists of two meters, one is the speedometer and the other is the odometer; the car odometer is generally located directly in front of the driver's position; the car odometer also includes two LCD digital display windows connected to the same signal source, which respectively accumulate the current mileage and the total mileage. Fuel mileage: Refers to the total mileage that vehicles such as cars and ships can continuously travel with maximum fuel reserves. The driving range of an electric vehicle refers to the mileage traveled from the fully charged state of the power battery to the end of the test specified by the standard, which is an important economic indicator of electric vehicles.
17
3
Share

Is the Misfire in Cylinder 4 a Serious Problem?

Misfire in cylinder 4 is a serious issue. Here is the relevant information: 1. Cylinder pressure: The misfire in cylinder 4 is caused by internal wear or damage, resulting in insufficient cylinder pressure. Possible causes include faulty ignition coils or spark plugs, issues with the fuel injector wiring or clogged injectors, or the possibility of the fourth cylinder injector failing and cutting off fuel supply. Other factors may include fuel pressure, fuel lines, or fuel quality. It is recommended to conduct a repair as soon as possible. 2. Electronic faults: The engine control unit (ECU) may be damaged or generate fault codes. The solution is to check the cylinder pressure of each cylinder. Generally, the cylinder pressure for most vehicles is around 1300 kPa. Address any cylinders with abnormal pressure.
1
2
Share

What does the left turn signal mean?

Left turn signal is a signal light, mainly used to signal pedestrians or other vehicles that the car needs to start moving or make a left turn. Introduction to turn signals: Turn signal: Refers to the yellow flashing lights on the left and right sides of the front and rear of a motor vehicle. Purpose: To inform vehicles in front and behind of the intended direction of travel. Usage: Commonly used when the vehicle is turning, changing lanes, or overtaking. If both lights flash simultaneously, it indicates an emergency situation, alerting passing vehicles and pedestrians to take caution and yield. Commonly known as: Hazard lights. Introduction to using left turn signal while driving on the road: For vehicles driving in the middle lane, activating the left turn signal indicates an intention to overtake. For vehicles already in the overtaking lane, activating the left turn signal still represents an intention to overtake.
19
5
Share

Is It Normal for the BMW X1 to Have Strong Gear Shift Jerks?

Strong gear shift jerks in the BMW X1 are not normal. While slight jerks are acceptable, intense jerking is abnormal. Here are methods to eliminate gear shift jerks in the BMW X1: 1. Adjust based on road conditions and load: When driving uphill, the vehicle's resistance increases, requiring higher RPM for gear shifts. Similarly, under heavy load, shifting at higher engine RPM prevents gear dragging. Conversely, when accelerating downhill, skip-shifting can be employed. Adjustments should be made according to specific driving conditions. 2. Modify the gear shift sequence: The standard shift sequence is progressive, i.e., 1-2-3-4-5. However, skip-shifting can also avoid jerking in certain situations, such as shifting directly from 2nd to 4th gear at 2000 rpm or from 3rd to 5th gear.
5
4
Share

What Are the Basic Knowledge Points of Manual Transmission?

Basic knowledge of manual transmission includes mastering the timing of gear shifting and the coordination between throttle and clutch during vehicle start-up. Mastering the timing of gear shifting: The optimal timing for gear shifting essentially involves keeping the engine operating within its optimal RPM range as much as possible. Coordination between throttle and clutch during vehicle start-up: First, place the gear lever in neutral, start the engine, then depress the clutch pedal, shift into first gear, and gradually release the clutch while applying throttle to start the car. During driving, the coordination between throttle and clutch needs to be adjusted according to the vehicle speed, because as the speed increases, the time available for the driver to operate decreases inversely. When releasing the clutch, the action must be quick. At the same time, to ensure smooth gear shifting, the throttle must also be well controlled to avoid pressing the throttle unnecessarily during the shifting process.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.