···
Log in / Register

What is the ground clearance of the Excelle?

3 Answers
ParkerFitz
09/06/25 4:04am
The ground clearance of the Excelle when unloaded is approximately 138MM. The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and stumps without collision. The following is an introduction to the content about large ground clearance: Large ground clearance: The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability. Small ground clearance: The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.
Was this review help?
8
1
Share
LenaDella
09/18/25 4:01am
I've been driving the Excelle for several years, and the ground clearance is about 145mm, which feels just right for daily city driving. It doesn't scrape the chassis when going over speed bumps, but you need to be careful with potholes or steep roads—going too fast might cause scraping. I recommend not driving straight onto curbs when parking; instead, use a gentle slope approach. As a sedan, the Excelle doesn't have the same level of off-road capability as an SUV, but it's more fuel-efficient and comfortable. A friend who drives a car with similar height mentioned that this clearance can also make it prone to water ingress during heavy rain, so checking if the chassis screws are tight can prevent potential loosening issues. Overall, it's suitable for city commuting, but it's best to drive slowly or avoid rough roads.
Was this review help?
15
5
Share
Expand All
Kathryn
11/01/25 4:28am
As a car enthusiast, I've specifically looked up the data on the Excelle. The ground clearance fluctuates around 145mm, depending on whether it's unloaded or fully loaded. When unloaded, it's generally around 150mm, but drops to approximately 140mm when fully loaded with passengers or luggage. This is related to tire size and suspension settings - higher clearance might make mountain driving less stable, while lower clearance risks scraping the undercarriage. I've measured it with a ruler; it handles garage ramps fine, but struggles on muddy rural roads where tires can get stuck. Compared to my friend's Corolla, it's slightly lower by 5mm, requiring extra caution on multiple inclines. During regular car washes, I always check for undercarriage wear to prevent rust.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

Which way to adjust if the rear is too wide when reversing into the parking space?

If the rear of the car is tilted to the right, turn the steering wheel to the left. Here is some relevant information about reversing into a parking space: 1. Overview: Reversing into a parking space has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to operate the vehicle in a confined space. Reversing into a parking space is one of the assessment points in the driver's test, which involves correctly maneuvering the vehicle into the garage from both sides while in motion. There is a time limit for this maneuver during the test. 2. Methods: There are three most common types of reversing into a parking space. The first is the "non"-shaped reversing, commonly found in large shopping malls. The second is the "one"-shaped reversing along the roadside, also known as parallel parking. The third is the less common diagonal reversing. 70% of driving school students find parallel parking more challenging.
12
3
Share

Where is the blower relay located in the Buick Excelle?

For the SAIC-GM Buick Excelle, the air conditioning compressor relay is located in the fuse box under the hood, next to the battery. Here is some related information: 1. Relay: A relay is an automatic switching component with isolation functionality, acting as an "automatic switch" that uses a small current to control the operation of a larger current. 2. Function: In a circuit, it serves roles such as automatic regulation, safety protection, and circuit switching. Relays typically have sensing mechanisms that can reflect certain input variables (such as current, voltage, power, impedance, frequency, temperature, pressure, speed, light, etc.); they also have actuating mechanisms that can control the "on" and "off" states of the controlled circuit. Between the input and output parts of the relay, there is an intermediate mechanism that provides coupling isolation for the input, functional processing, and driving of the output part.
4
5
Share

How to judge the distance of the rear of the car when reversing into the garage?

You can first try to find a reference object. After the car is parked, observe the relative position between a certain part of the car and the wall corner line in the rearview mirror. The following is a related introduction about reversing into the garage: 1. Overview: Reversing into the garage is a mandatory item for obtaining a small car driver's license after 2013. It tests the driver's ability to operate the car in the field. Reversing into the garage is an assessment point in the driver's test. That is, manipulating the vehicle to correctly reverse into the garage from both sides while in motion. There is a time limit for reversing into the garage during the test. 2. Methods: There are three most common types of reversing. The first is the "non"-shaped reversing into the garage, which is commonly seen in various large shopping malls. The second is the "one"-shaped reversing into the garage on the roadside, which is commonly referred to as parallel parking. The third is the less common diagonal reversing into the garage. 70% of accompanying driving students believe that parallel parking is more difficult.
16
2
Share

Is the car too far to the left when reversing into the garage because the steering wheel was turned too early or too late?

It is because the steering wheel was straightened too early. Here is some relevant information about reversing into the garage: 1. Overview: Reversing into the garage is a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to operate the vehicle in a confined space. Reversing into the garage is one of the assessment points in the driver's test, which involves correctly maneuvering the vehicle into the garage from both sides while in motion. There is a time limit for reversing into the garage during the test. 2. Methods: There are three most common types of reversing. The first is the "non"-shaped reversing into the garage, commonly seen in large parking lots. The second is the "one"-shaped reversing into the garage by the roadside, also known as parallel parking. The third is the less common diagonal reversing into the garage. 70% of driving school students find parallel parking more challenging.
9
3
Share

What is the reason for one side of the Volkswagen Lavida's small light being on and the other side not?

The issue of one side of the Volkswagen Lavida's small light being on while the other side is not may be caused by a blown fuse or a short circuit in the bulb. Below is more information about the Volkswagen Lavida: 1. Introduction: As a new A-class car launched by Shanghai Volkswagen, the name LAVIDA Lavida carries profound meaning. Its English name, LAVIDA, is a typical Spanish word representing life, living, and hope, symbolizing the exuberant power of life and a joyful lifestyle. It promotes an innate life potential bursting from within and the passion and motivation to move towards a better life. 2. Exterior Design: The car features a unique teardrop-shaped headlight design; at the same time, the traditional Volkswagen family grille and U-shaped front face design are enhanced and inherited in the Lavida. The Lavida's bumper design is also distinctive, with its thick and powerful curves harmoniously coordinated, making it a highlight of the Lavida's front face design.
9
5
Share

Where is the engine number located on the Audi Q7?

The engine number of the Q7 is located between the supercharger on top of the engine and the right cylinder head, near the generator belt and water pump pulley. There is a 45-degree inclined surface where the engine number is stamped. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be found through the following 4 ways: The vehicle's driving license displays the engine number, usually located on the second-to-last line; The motor vehicle registration certificate records the engine number; The car purchase invoice includes the engine number; The vehicle purchase tax payment certificate states the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and engine models can be the same. The engine number, however, refers to the production serial number of the engine. Each engine can only have one unique engine number, and no two engines share the same number.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.