What is the ground clearance of the Chery Arrizo 5e?

Can I Make a U-Turn at a Left Turn?

Motor vehicles can make a U-turn at locations where there are no signs or markings prohibiting U-turns or left turns. Turning Instructions: As long as there is no U-turn prohibition sign or a separate U-turn signal, motor vehicles can make a U-turn at any time, provided it does not interfere with normal traffic flow and safety is ensured. Typically, the central divider on regular roads changes from a solid line to a dashed line near intersections, allowing vehicles to make U-turns in this area. Turning Regulations: Motor vehicles must not make U-turns at locations with signs or markings prohibiting U-turns or left turns, or in areas such as railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or any other hazardous sections of the road.

16

1

Share

How Many Cylinders Does the Tank 300 Engine Have?

Tank 300 is equipped with a 2.0-liter turbocharged four-cylinder engine, model E20CB. Tank 300's Power: The E20CB delivers a maximum power of 167kW and a peak torque of 387Nm, meeting the China VI emission standards. The maximum power is achieved at 5500 rpm, while the maximum torque range is between 1800 to 3600 rpm. It features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. Tank 300's Features: Tank 300 comes with intelligent full-speed ACC cruise control, intelligent lane keeping, the latest 9.3-generation ESP system, intelligent traffic sign recognition, rollover prevention RMI, OPW front and rear integrated side airbags, CLT dynamic locking dual pretension seat belts, and more.

14

1

Share

Is Plastic Welding for Car Bumpers Strong?

Plastic welding for car bumpers is very strong after completion. However, it must be welded on the inside of the bumper, not the outer surface, because the plastic welding rod cannot be polished after welding. Plastic welding refers to a connection method where the contact surfaces of two plastic parts are simultaneously melted by heating, allowing them to bond into a single unit. This method is only suitable for thermoplastic materials. Plastic welding can be completed with or without a welding rod, but the requirements differ. When using a welding rod, the ends to be welded must be shaped (e.g., U-shaped, X-shaped, etc.) into a seam, and then the melted rod fills the seam, joining the two parts into one. Without a welding rod, the welding surfaces must be heated until melted, and then vertical pressure is applied until they fuse tightly together.

6

4

Share

What are the effects of driving a sedan through deep water?

After driving through deep water, a sedan may experience electrical wire short circuits, poor contact, water ingress into the engine, and reduced lifespan. Insufficient engine power: After wading through water, if water enters the engine, it can cause issues such as insufficient power and shaking. Prolonged use under these conditions may lead to deformation or breakage of the piston connecting rod, ultimately damaging the engine, though significant disassembly is required for repairs. You can first check the air filter to see if there are any signs of water. Water entering the engine: The location of the air filter is considered the gateway to the engine; air entering through the intake port passes through the air filter before entering the engine. When a vehicle wades through water, water can also enter the engine through the intake port.

17

2

Share

What car seat cushions are cool in summer?

In summer, linen car seat cushions and bamboo mat seat cushions are cool. Linen seat cushions: Linen seat cushions are made of pure natural materials, offering strong decorative appeal and comfort. They also feature high tensile strength, softness, fine texture, weak conductivity, quick water absorption and dissipation, and high expansion rate. They can make the perceived temperature of the human body 3-4 degrees Celsius lower than other fibers. When purchasing, it is important to inquire about the linen content and avoid blindly choosing low-priced products. Bamboo mat seat cushions: Bamboo mat seat cushions are a very common type of seat cushion, similar to bamboo mats found in many households. Their biggest feature is rapid cooling, and they are affordable and cost-effective, making them a great choice for car owners looking for cool seat cushions.

18

0

Share

Why is the car spring squeaking?

The squeaking noise from the car spring could be caused by various reasons, such as a damaged damper in the shock absorber or a worn-out shock absorber top mount. Solutions for squeaky springs: When there is no rain and the car hasn't been washed, check for oil leakage on the shock absorber casing and dust cover. Minor oil seepage usually doesn't cause noise, but severe leakage requires timely replacement to reduce safety hazards. Methods to prolong shock absorber lifespan: When driving on bumpy roads, due to slower road construction progress and engineering quality issues in our country, some sections may lack concrete pavement or have uneven surfaces in urban areas. Always reduce speed when driving on such roads, otherwise excessive force on the shock absorber may damage the piston.

11

1

Share

What is the ground clearance of the Chery Arrizo 5e?

Can I Make a U-Turn at a Left Turn?

How Many Cylinders Does the Tank 300 Engine Have?

Is Plastic Welding for Car Bumpers Strong?

What are the effects of driving a sedan through deep water?

What car seat cushions are cool in summer?

Why is the car spring squeaking?

How often do new cars typically undergo a facelift?

Can window tint film be applied to the outside of glass?

Will Engine Oil Burn?

What Causes the Squeaking Sound in Small Cars?