···
Log in / Register

Why is the car spring squeaking?

6Answers
VanAllie
07/29/2025, 12:47:48 PM

The squeaking noise from the car spring could be caused by various reasons, such as a damaged damper in the shock absorber or a worn-out shock absorber top mount. Solutions for squeaky springs: When there is no rain and the car hasn't been washed, check for oil leakage on the shock absorber casing and dust cover. Minor oil seepage usually doesn't cause noise, but severe leakage requires timely replacement to reduce safety hazards. Methods to prolong shock absorber lifespan: When driving on bumpy roads, due to slower road construction progress and engineering quality issues in our country, some sections may lack concrete pavement or have uneven surfaces in urban areas. Always reduce speed when driving on such roads, otherwise excessive force on the shock absorber may damage the piston.

Was this review help?
111
Share
Phillips
08/14/2025, 02:27:28 AM

When I drive my car, I often hear the springs squeaking, especially when turning or going over speed bumps. The sound is quite uncomfortable. This is mostly due to lack of lubrication in the springs or suspension components, causing friction between metal surfaces and producing noise. The springs in the car bear weight and vibrations, and over time, the grease can dry out, especially in rainy or cold weather, which can lead to rust issues. Additionally, if you've recently overloaded your car or driven on rough roads, it might cause excessive friction in the springs. Last time I encountered this, I tried spraying some household lubricant myself, which temporarily reduced the noise, but in the long run, it could affect the stability of the suspension system. If a spring were to break on the highway, it could be very dangerous. I recommend checking under your car for any obvious wear or rust. If the noise persists, it's best to visit a professional repair shop for a thorough inspection—don't compromise on safety.

Was this review help?
17
Share
Expand All
HectorDella
10/12/2025, 11:09:24 PM

As someone who has been driving for over a decade, I've encountered the issue of squeaky springs. At first, I thought it was a minor problem. Later, I noticed the noise was particularly noticeable when the car went over bumps, such as on dirt roads or suburban streets. The reason, most likely, is that the rubber bushings near the springs have aged and lack lubrication, causing friction and squeaking. In my own car, the noise is louder in winter because metal contracts, increasing friction, and it's better in summer but still not something to ignore. I make sure to regularly clean the dust under the car to prevent debris from getting stuck in the spring gaps, which can accelerate wear. The solution is simple: first, try applying some lubricating grease at the spring connections. If the noise persists after a few days, it might be due to internal spring damage or shock absorber failure. Such noises are common in older cars, and addressing them early can extend the suspension's lifespan.

Was this review help?
14
Share
Expand All
Dorothy
11/25/2025, 11:08:41 PM

Squeaky car springs are quite common, and I often notice this noise while driving. The main causes include dried-up spring lubricant or rust on the springs themselves, especially in vehicles over five years old. Additionally, loose components in the suspension system, such as shock absorbers or linkages, can also cause the springs to make noise. For a quick fix, you can spray ordinary automotive lubricant on the spring surfaces to see if it reduces the noise. Regular maintenance is also crucial, such as cleaning the undercarriage dust every three months to prevent buildup from causing friction. Don’t ignore this sound—though minor, it can affect overall performance and driving comfort over time. It’s advisable to inspect it yourself or visit a garage to avoid unexpected expenses.

Was this review help?
11
Share
Expand All
VanessaMarie
01/16/2026, 12:36:44 AM

When I encounter squeaking noises from the car springs, my first concern is safety risks. Springs are the core of the suspension system, and squeaking usually indicates friction between metal components, either due to lack of lubrication or severe wear. The noise tends to be more frequent in humid weather or after heavy loads, which may stem from rust at spring joints or damaged shock absorbers. Delayed handling can affect the vehicle's balance, especially increasing the risk of losing control during sudden braking or high-speed turns. I recommend regular inspections of tires and the suspension system, using a soft cloth to clean the spring area and keep it dry. Lubrication is a temporary solution; if the noise persists for several days, it's essential to visit a professional workshop to measure spring tension. Avoid trying to fix it yourself to save money. Remember, good springs are the cornerstone of driving safety.

Was this review help?
11
Share
Expand All
Delilah
04/12/2026, 02:57:26 AM

My small car squeaks like a spring whenever it goes over bumps, which is quite annoying. The root cause is mostly due to the lack of grease on the springs, causing friction between parts and generating noise; or the springs may have fatigued and deformed after long-term use, producing abnormal sounds. Sometimes, it's related to temperature changes, with louder contraction noises in winter. Ignoring this issue could lead to problems spreading throughout the entire suspension system, resulting in unstable handling, especially on slippery roads. I've tried adding lubricant as a short-term solution, but prevention is key: regularly check the springs for rust and ensure the car body isn't deformed by heavy loads. Additionally, road selection greatly impacts wear—avoiding gravel roads can reduce damage. It's advisable to address the issue early to prevent minor problems from escalating, ensuring peace of mind.

Was this review help?
4
Share
Expand All
More Q&A

Why is the BMW 320 air conditioning not cooling?

BMW 320 air conditioning not cooling reasons are as follows: 1. Refrigerant issue: The reason why the car air conditioning is not cooling sometimes is due to problems with the refrigerant in the car air conditioning system. 2. Filter blockage: Sometimes, excessive impurities in the car air conditioning refrigerant and refrigeration oil can also cause the filter screen to become clogged, leading to reduced cooling effectiveness, increased resistance, and a decrease in the flow of refrigerant to the expansion valve, resulting in the car air conditioning not cooling. 3. Dryer saturation: There is a dryer in the car air conditioning refrigeration system, whose main task is to absorb moisture in the refrigerant and prevent excessive moisture in the refrigerant from causing a decrease in cooling capacity. When the desiccant in the dryer is saturated, moisture can no longer be filtered out. 4. Compressor drive belt too loose: Sometimes, the car air conditioning does not cool because the compressor drive belt is too loose, or it may be due to a decrease in the condenser's heat dissipation capacity, leading to a reduction in the air conditioning cooling capacity.
110
Share

Where is the fuse box located in the Hongqi HS5?

The upper cover of the Hongqi HS5 fuse box belongs to the category of engine hood and bracket, and is installed on top of the fuse box. Below is more relevant information: 1. Hongqi HS5 introduction: The Hongqi HS5 is positioned as a mid-size SUV, with body dimensions of 4760mm in length, 1907mm in width, and 1700mm in height, and a wheelbase of 2870mm. In terms of power, this vehicle is equipped with a 2.0T turbocharged engine, with a maximum power output of 224 horsepower and a maximum torque of 340 Nm. In terms of the transmission system, the engine is paired with a 6-speed automatic transmission. 2. Automotive fuse box: The automotive fuse box is used to install automotive fuses. Based on the size of the fuses installed, it can be divided into: small automotive fuse box, medium automotive fuse box, and large automotive fuse box. Common injection molding materials include: plastic, nylon, bakelite, and PBT engineering plastic, each with different high-temperature resistance levels depending on the material.
103
Share

How Often Should the Oil in a Dry Dual-Clutch Transmission Be Changed?

Dry dual-clutch transmission oil is typically changed every three years or after driving 60,000 kilometers. The internal structure of a dry dual-clutch transmission is relatively complex, requiring high-quality transmission lubricants. Therefore, it is recommended to use the manufacturer's specialized oil for replacement. Dual-clutch transmissions are divided into dry and wet types. Both types operate on similar principles, with two clutches taking turns to work. However, the connection medium between the clutch's driving and driven plates differs. Dry dual-clutch transmissions rely on air, while wet dual-clutch transmissions use oil. Dry and wet dual-clutch transmissions share similarities but also have distinct differences, each with its own advantages and disadvantages. The primary difference lies in the working environment of their clutch plates. In wet dual-clutch transmissions, the clutch plates are immersed in transmission fluid, whereas in dry dual-clutch transmissions, the clutch plates directly contact the engine flywheel. In terms of technological maturity and reliability, wet dual-clutch transmissions are more stable because the clutch plates operate in hydraulic oil, which provides some cooling effect. Dry dual-clutch transmissions, due to their poor heat dissipation, are prone to overheating of the clutch plates in congested urban areas, posing a risk of burning or erosion.
115
Share

What Does Energy Recovery in Electric Vehicles Mean?

Energy recovery in electric vehicles literally means: recycling wasted energy and then recharging the power battery with electricity. Function: This can ensure or even increase the battery's driving range. Information about electric vehicles is as follows: Electric vehicle (EV): refers to a vehicle that uses electrical energy as the power source and is driven by an electric motor, belonging to the category of new energy vehicles. Classification: includes Battery Electric Vehicles (BEV), Hybrid Electric Vehicles (HEV), and Fuel Cell Electric Vehicles (FCEV). There are mainly two modes of energy recovery in electric vehicles: braking recovery and coasting recovery. The difference between the two lies in whether the brake pedal is pressed. As the name suggests, braking recovery is achieved by pressing the brake pedal, while coasting recovery is achieved by releasing the accelerator to coast. Currently, there are two ways to achieve motor braking energy recovery: one is the Parallel Regenerative Braking System (RBS), and the other is the Series Regenerative Braking System (CRBS). The differences between the two are as follows: In RBS, since the brake pedal and the brake wheel cylinder are parallel, during braking deceleration, the brake wheel cylinder generates hydraulic braking, and the motor also generates braking. Therefore, some energy is still lost through braking friction, resulting in lower energy recovery efficiency. In CRBS, the brake pedal and the hydraulic mechanism are parallel. During braking deceleration, the motor brakes first, acting as the main torque source, while hydraulic braking compensates for insufficient braking torque. Thus, CRBS recovers more energy than RBS, but if the brake is pressed to a certain depth, the two are similar. Regarding vehicle selection: To minimize energy consumption, it is advisable to choose a vehicle with CRBS functionality. Of course, if possible, use coasting energy recovery more often, as coasting energy recovery is 100% free from other external forces, whereas braking energy recovery may involve some low-voltage power consumption during CRBS operation, and hydraulic braking may intervene in certain conditions, causing energy loss. Benefits of kinetic energy recovery: Energy saving: Because it converts part of the vehicle speed into battery power, it relatively saves energy. Saves brake pads: Experienced drivers can reasonably use kinetic energy recovery to decelerate, reducing the number of brake applications, thereby saving brake pads. Improves braking effect: While braking, kinetic energy recovery also works, effectively enhancing the braking effect.
110
Share

What is the real reputation of Haval M6 Plus?

Haval M6 Plus has a good reputation and is a relatively good car. Here is more relevant information: 1. Haval M6 Plus configuration: keyless start system, steering wheel up and down + front and rear adjustment, monochrome trip computer display, fabric seats, rear seat backrest adjustment, rear seat proportional folding, 10.25-inch LCD screen, GPS/Beidou dual navigation system, mobile phone interconnection/mapping, car networking, OTA upgrade, one-key window lift function for the driver's seat, automatic air conditioning, and rear air vents. 2. Haval M6 appearance introduction: The new Haval M6 adopts a new design language, with a star-studded grille, integrated high and low beam lens headlights, a floating roof combined with a unique "boomerang" chrome strip, roof-mounted luggage rack, dragon-wing side waistline, making the overall body lines more fluid, creating a strong sense of technology and sportiness, effectively catering to the needs of young customer groups. In terms of body size, the new car has a length, width, and height of 4649/1830/1705mm, a super-long wheelbase of 2680mm, super-large space, and an 808L trunk. After seat adjustment, its volume can reach a super spacious 2010L.
101
Share

Does the China 6 Civic have a particulate filter?

In the Civic series, China 6A models do not come with a particulate filter, while China 6B models are equipped with one. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, designed to capture particulate emissions before they enter the atmosphere. It can reduce soot emissions from diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. How the particulate filter works: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate trap through a dedicated pipe. Inside, a densely arranged bag-type filter captures the carbon particles on a metal fiber mat filter. When the accumulation of particles reaches a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide, which is then expelled. To check whether the China 6 Civic has a particulate filter, you can use the following three methods: 1. Refer to the and to see if the particulate filter function is mentioned. Additionally, carefully check the fault codes in the manual to see if there is a "particulate filter" warning light indicator. 2. Check the label on the oil filler cap. If the cap clearly states 0W-20 grade oil, it indicates the presence of a particulate filter. 3. Look at the exhaust pipe behind the three-way catalytic converter to see if there is an additional cylindrical section. If present, that is the particulate filter.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.