What is the ground clearance of the Audi Q7?

1 Answers
McJourney
07/29/25 10:18pm
The minimum ground clearance of the Audi Q7 is 201mm. The Audi Q7 is positioned as a mid-to-large SUV, so its ground clearance is relatively higher compared to other models. The greater the minimum ground clearance of a vehicle, the better its off-road performance; conversely, the smaller the ground clearance, the worse its off-road performance. The minimum ground clearance refers to the shortest distance between the vehicle's chassis and the ground when the car is fully loaded, which directly affects the vehicle's off-road capability. The Audi Q7 measures 5086mm in length, 1983mm in width, and 1737mm in height, with a wheelbase of 3002mm. The interior design of the Audi Q7 reflects Audi's meticulous attention to detail, with material selection and color coordination exuding a sense of luxury that is just right. The center console is slightly tilted towards the driver for easier operation, and the multimedia system is also very user-friendly.
Was this review help?
2
2
Share
More Forum Discussions

How Many Cylinders Does the BMW 1000rr Have?

It features a four-stroke, inline four-cylinder, water-cooled engine with a total displacement of 999cc, delivering a maximum power of 193 hp at 13,000 rpm and a peak torque of 112 Nm at 9,750 rpm, with a top speed exceeding 300 km/h. BMW 1000rr Engine Overview: The engine itself weighs only 59.8kg, making it the lightest 1000mL four-cylinder engine currently on the market. Like all BMW motorcycle drive units, this engine is based on a meticulously designed overall concept, space-saving auxiliary device layout, and an integrated constant-mesh six-speed transmission. Four-Cylinder Engine Configuration: The four-cylinder engine is equipped with cam follower control and dual overhead camshafts, enabling maximum power and torque output while meeting requirements for rigidity, minimal moving mass, and optimized valve cross-section timing. Additionally, through a highly compact cylinder head, the engine achieves an ideal combination of maximum rigidity and the lightest mass for moving valve components.
15
0
Share

What Causes a Car Navigation Screen to Go Black?

Car navigation display screen blackouts are typically caused by issues related to the vehicle's power supply voltage, navigation system cables, or the power connector of the navigation display. Below are detailed explanations of the specific reasons for car navigation screen blackouts: 1. Vehicle power supply voltage issues: Investigate the stability of the vehicle's power supply voltage to rule out voltage fluctuations as a possible cause. 2. Navigation system cables: If the voltage is stable, check the cables at the back of the device for any issues. Try replacing the connections to eliminate this possibility. If the connections are fine, inspect the display cables of the device. If any problems are found, replace them with new ones for testing. 3. Loose power connector of the navigation display: If there is no image but sound is still present, this indicates a loose power connector on the navigation display. If there is neither sound nor image, the issue likely lies with the DVD system.
10
4
Share

What Causes the Squeaking Noise from Brake Pads When the Car is Cold?

The reasons for squeaking brakes when the car is cold are as follows: 1. If it is a new car, the brake pads and brake discs are still in the break-in period, which may cause a slight hissing noise. This is normal and can be ignored. It usually disappears automatically after a few hundred kilometers. 2. There may be foreign objects between the brake pads and brake discs, such as small particles like sand or small stones that have entered between them, causing a hissing sound. 3. The brake discs and brake pads may be stuck together due to rust, causing noise. This usually happens after driving in the rain and then leaving the car unused for several days. The brake discs and brake pads rust and stick together, resulting in noise when driving again. This is also normal. 4. The brake disc fixing screws may be missing or excessively worn, causing a mismatch with the brake pads and resulting in noise. 5. The brake pads may be nearly worn out, which can cause a screeching sound. If this occurs continuously for several days and the noise becomes louder and more frequent, it usually indicates that the brake pads need to be replaced.
9
5
Share

How many points are deducted for changing lanes in a designated lane?

Changing lanes in a designated lane, according to the provisions of the Road Traffic Safety Law, will result in a fine for violating the prohibition markings, with a one-time deduction of 3 points. The introduction of "designated lanes" and dedicated directional lanes is as follows: "Designated Lane": Refers to a dedicated lane where, based on the preset directions of the road to different destinations, a specific lane is designated for vehicles heading to a specified location and direction only, and vehicles heading to other destinations are not allowed to enter; Dedicated Directional Lane: To facilitate citizens in correctly using this lane, the Municipal Traffic Police Corps has set up supporting "Dedicated Directional Lane" indicator signs, LED prompt boards, guiding signs, and other traffic facilities starting 300 meters before the entrance of the "designated lane" to alert passing drivers about the entrance to the "designated lane" and the area it points to. At the same time, it warns that electronic monitoring devices are used in this section to capture vehicles not following the regulations, and violators will be fined and deducted 3 points for violating the prohibition markings.
4
5
Share

Will a Manual Transmission Car Stall If Only the Clutch Is Released Without Giving Gas?

Manual transmission cars will not stall if only the clutch is released without giving gas. Stalling on Flat Ground: First, press the clutch with your left foot, shift to neutral, then turn the key or press the start button to restart the engine. Keep the left foot pressing the clutch, shift into first gear, lightly press the accelerator with your right foot, and slowly release the clutch with your left foot. When the left foot reaches the engagement point, you will feel the car has a tendency to move forward. Pause slightly at this point, and gradually increase the accelerator with your right foot. Then, continue to slowly release the clutch with your left foot until it is fully released. Stalling During a U-Turn: Some beginners may also stall during a U-turn, often because the steering wheel is turned to the maximum, resulting in a very tight turning angle and extremely slow speed, making it easy to stall with just the clutch engagement. If stalling occurs, use the same solution as stalling on flat ground. In fact, this situation can be avoided by not turning the steering wheel to the maximum, making a wider turn, and pressing the accelerator slightly.
13
1
Share

What is the general width of a sedan?

The width of common family sedans (A-segment cars) generally ranges from 1600mm to 1800mm. Below is more information about sedan widths: 1. A-segment cars have a wheelbase between 2.5 meters to 2.7 meters, with engine displacements around 1.5L to 2.0L. Examples include the Focus, Sagitar, Corolla, and Audi A3. A-segment cars are the most widely used family vehicles in China. 2. B-segment mid-range passenger cars have a wheelbase of approximately 2.7 meters to 2.9 meters, with engine displacements ranging from 1.8L to 2.5L. The B-segment market includes models such as the Mazda6, Accord, Mondeo, Sonata, Audi A4, Passat, and Toyota Camry. 3. C-segment premium passenger cars have a wheelbase of about 2.8 meters to 3.0 meters, with engine displacements from 2.3L to 3.0L. The most renowned C-segment cars in China are the Audi A6, BMW 5 Series, and Mercedes-Benz E-Class.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.