What is the ground clearance of the 2021 Buick Excelle?

2 Answers
StLandon
07/25/25 7:31am
The ground clearance of the 2021 Buick Excelle is 120mm. The minimum ground clearance of the 2021 Buick Excelle refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the 2021 Buick Excelle, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. The 2021 Buick Excelle is a compact car produced by SAIC-GM Buick. The hybrid version of the 2021 Buick Excelle has dimensions of 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. The automatic version measures 4609mm in length, 1798mm in width, and 1464mm in height, with the same wheelbase of 2640mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the 2021 Buick Excelle is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the vehicle. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban driving with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance is advisable to avoid scraping or damaging the chassis.
Was this review help?
20
5
Share
CalebDella
08/10/25 6:34pm
I've driven the 2021 Buick Excelle quite a few times. The ground clearance, or ride height, is officially around 145mm. As a main car for urban commuting, this height is perfectly adequate on asphalt roads and poses no issues when entering or exiting underground parking. I've encountered some minor bumps, and the suspension handled them quite steadily without scraping the undercarriage. However, if you frequently drive on rural dirt roads or in snowy areas, you need to be cautious. Compared to SUVs, it's significantly lower, so its passability takes a hit with higher speed bumps or muddy roads. During routine maintenance, always check the tire pressure—insufficient pressure can slightly reduce the actual clearance. Overall, the Excelle is designed with comfort in mind, and its ground clearance strikes a balance between handling and daily convenience. Don't overlook the values in the manual, as they may vary slightly between different configurations.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What is the horsepower of the 4108 engine?

Most 4108 engines have a horsepower of around 140. Horsepower refers to the engine's power, which is an important performance parameter. Power is used to measure how much work an engine can perform per unit of time. Engines with higher power have stronger performance but also higher fuel consumption. The power of an engine is related to its speed and torque. The higher the speed, the higher the engine's power. Similarly, the greater the torque, the higher the engine's power. High-speed engines perform more work per unit of time, while high-torque engines deliver greater torque with each output. Many car manufacturers use turbocharging technology to enhance engine performance. Turbocharging technology can increase the engine's air intake without increasing its displacement. Principle of engine turbocharging: Turbocharging utilizes the inertial force of exhaust gases produced by the engine to drive the turbine in the turbine chamber. The turbine, in turn, drives the coaxial impeller, which compresses the air delivered through the air filter pipeline, pressurizing it before it enters the cylinders. This increases the air intake into the cylinders and also raises the fuel intake.
3
2
Share

What Maintenance Does a Car Need After Four Years?

For a car that has been used for four years, the maintenance items that need attention include engine oil, the three filters (air filter, oil filter, and fuel filter), cabin air filter, brake fluid, coolant, transmission fluid, and spark plugs. These components generally require replacement. Additionally, it's important to inspect wear-and-tear items such as car tires and window seals. Among these, brake fluid and transmission fluid are particularly crucial. Consequences of Not Adding Brake Fluid Timely: Failure to replenish brake fluid promptly can lead to severe safety hazards, potentially endangering the lives of passengers. Therefore, brake fluid must never be overlooked. Consequences of Not Changing Transmission Fluid: If the car has been driven for an extended period or exceeds 60,000 kilometers, regular transmission fluid replacement is necessary. Deteriorated transmission fluid can result in difficulty shifting gears and wear on transmission bearings. Important Notes: A major maintenance service is typically required after several years of use or when the mileage approaches 100,000 kilometers (some cars may need it at 60,000 kilometers). A comprehensive inspection should be conducted, and parts should be replaced as needed. The car's drivetrain is the most critical system—damage to it can have serious consequences. Additionally, the electrical system in older cars is prone to aging, loosening, or detachment, which plays a vital role in vehicle safety.
4
4
Share

Why Does Tire Repair Always Scratch the Wheel Hub?

The paint on wheel hubs is very prone to peeling off. Even a slight touch from the tire mounting/dismounting machine head can cause the paint to chip, but as long as it's not scratched off during the process, it won't affect the wheel hub. Unless it's a brand-new car, most vehicles' wheel hubs will experience this issue. If the scratches are minor, you can purchase a bottle of wheel hub repair spray paint online to fix it yourself. For more significant scratches, it's best to take it to a professional wheel hub repair shop. Additional Information: Typically, curbs and stones kicked up from the road are the biggest culprits for tire scratches. These often leave deep marks on the tires. In such cases, wheel hubs can usually be repaired. There are two main types: the first is steel wheels, commonly known as 'iron wheels,' which are frequently used in base-model vehicles. These wheels have the advantage of being more repairable—for example, they can be straightened if deformed. They are commonly used in off-road vehicles because they can withstand harsh off-road conditions and remain usable after repairs. The second type is aluminum alloy wheels. For these, minor scratches can be repaired without affecting safety. However, if cracks appear, it significantly compromises safety, and even if repairable, it's advisable to replace them outright instead.
17
2
Share

What is the fuel tank capacity of the 2017 Bora?

The fuel tank capacity of the Bora 2017 1.6L Manual Comfort model is 55L. It is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain is front-engine, front-wheel drive. The front suspension is a MacPherson strut independent suspension, and the rear suspension is a torsion beam non-independent suspension. Among vehicles in the same class, the fuel tank capacity of the Excelle 2021 1.5L Automatic Entry model is 44L, and the Lavida 2022 1.5L Manual Fashion model has a fuel tank capacity of 51L. During actual refueling, the amount of fuel may exceed the nominal capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel amount may exceed the nominal tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while nearing F means the tank is sufficiently full.
12
5
Share

What Are Some Clever Tricks for Unlocking a Car?

There are several clever tricks for unlocking a car: 1. Spare Key: The first thing that comes to mind is the spare key. Nowadays, most cars come with two keys for the owner—one for regular use and the other as a backup. The spare key should not be kept inside the car but stored in a safe place at home. Otherwise, if the regular key gets locked inside, the spare key will also be trapped in the car. 2. Contact a Locksmith: Hiring a professional locksmith is a relatively quick solution. Make sure to choose a licensed and reputable locksmith company. Before unlocking, they will present relevant documents, such as the vehicle registration and ID card, for verification. Once confirmed, they will proceed to unlock the car. 3. After-Sales Rescue Service: Most 4S shops now offer after-sales rescue services. Simply call them and wait for the rescue team to arrive. 4. Break the Window: If none of the above methods are feasible, breaking a window is an option. There are techniques to this—never target the windshield, especially the triangular window, as matching and repairing these can be very costly. Instead, choose the side windows of the front or rear doors. When breaking the glass, be quick, precise, and forceful to avoid injury from glass shards. 5. Wire or Thin Rope: Generally, after the door is closed, there is a sealing strip between the door window and the car body. You can remove this strip and then use a wire or thin rope to lower it through the gap near the keyhole. Once it hooks onto the door latch, pull it upward to open the door.
10
0
Share

Is It Illegal to Make a U-Turn at a Red Light?

Making a U-turn when the U-turn signal light is red is a traffic violation. According to the "Road Traffic Safety Law," it will result in: 6 penalty points and a fine of 200 yuan. If there is no U-turn signal light, and the gap is marked with a dashed line, the U-turn is not affected by the traffic signal and does not require crossing the pedestrian crossing. If the gap is marked with a solid line, then the U-turn must cross the pedestrian crossing and is subject to the traffic signal. Making a direct U-turn without adhering to these rules will be considered running a red light and may result in being photographed or penalized by on-site traffic police. When making a U-turn that requires crossing a pedestrian crossing, pedestrians must be given the right of way: If pedestrians are walking on the right side of the pedestrian crossing and have not reached the centerline of the road, vehicles on the left side of the road must slow down and proceed only after ensuring safety. If pedestrians are waiting outside the boundary line of the motorized and non-motorized lanes and have not entered the road, vehicles should slow down and proceed only after ensuring safety. If pedestrians cross the boundary line between the motorized and non-motorized lanes, vehicles that do not stop and yield are committing a violation and should be penalized. If pedestrians enter the motorized lane (Lane A) along the pedestrian crossing, vehicles in Lane B must slow down and proceed only after ensuring safety. If vehicles in Lane A do not stop and yield, it is a violation and should be penalized. If pedestrians are waiting at the centerline of the road without entering the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If pedestrians cross the centerline of the road and enter the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If the road is divided by a green belt and pedestrians are waiting in the central stopping area, vehicles must slow down and proceed only after ensuring safety. Cases where U-turns are allowed: If there is a U-turn sign at the intersection, a U-turn can be made. If there is a U-turn signal light, follow the signal light's instructions. If there is no signal light, make the U-turn based on the specific situation, ensuring it does not interfere with other vehicles or pedestrians. If there is no explicit prohibition of U-turns or left turns at the intersection, a U-turn can be made. "No explicit prohibition" means there are no "No U-turn" or "No left turn" signs, and the centerline is not a solid line. U-turns are also allowed on yellow grid lines. Yellow grid lines are no-parking zones marked at intersections prone to congestion due to temporary parking, important unit entrances, and other necessary locations. Parking on these lines (including waiting for traffic lights) is a violation. However, U-turns are allowed on yellow grid lines if there is no central barrier, as they are equivalent to "U-turn permitted." If there is a U-turn signal light at the intersection, follow the signal light—only proceed on green. If "No left turn" and "U-turn permitted" signs appear together, U-turns are allowed, but left turns are prohibited. Note that "No U-turn" is not the same as "No left turn." Precautions when making a U-turn at an intersection: Check the road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable U-turn location. If there is a "No left turn" sign ahead, even if there is no explicit "No U-turn" sign, U-turns are not allowed at that intersection, as U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, a U-turn is not permitted at that intersection. Always yield to straight-moving vehicles when making a U-turn. Proceed only if it does not interfere with their normal flow; otherwise, you will bear full responsibility for any accidents. Near the intersection stop line, lanes usually have guiding arrows. Not all leftmost lanes have left-turn arrows. If a lane has a straight arrow, even without explicit "No U-turn" signs, U-turns are not allowed.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.