What is the ground clearance of the 2017 CR-V?

2 Answers
OIsabela
07/24/25 12:11am
The ground clearance of the Honda CR-V 2017 is 193mm when fully loaded and 208mm when unloaded. Below is a related introduction to the minimum ground clearance: 1. Minimum ground clearance size: The larger the minimum ground clearance, the stronger the vehicle's ability to pass obstacles or uneven ground, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass obstacles or uneven ground, but the lower the center of gravity, which can increase stability. 2. Factors to consider: The minimum ground clearance must consider the passability of loading and unloading platforms during transportation, and the possibility that the car will not scrape when approaching the edge of a general sidewalk. If the vehicle is intended for sale in a specific country or region, the quality of local roads must also be considered. At the same time, the value of the minimum ground clearance has certain limitations, as it is related to the vehicle's function and aerodynamics. For example, sports cars have a relatively small minimum ground clearance, while SUVs have a relatively large minimum ground clearance.
Was this review help?
16
4
Share
VioletAnn
08/10/25 7:55pm
I've been driving a 2017 CR-V for several years and feel its ground clearance is quite good. Officially, the minimum ground clearance is 198mm, which is above average among urban SUVs. I live in the suburbs and often drive on dirt roads and small slopes, and this height rarely causes my car to scrape the undercarriage. Compared to sedans, the CR-V has much better off-road capability, safely passing through water-filled potholes or rocky roads. I've also tried adding a roof rack, which didn’t significantly affect the height. During maintenance, it’s important to check tire pressure and the suspension system to avoid reduced clearance affecting driving stability. Although higher ground clearance slightly increases fuel consumption, the difference is only 1-2 points in daily driving, making it very practical. Overall, the 198mm design is well-balanced, suitable for family trips and occasional adventures.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Can I still file an insurance claim months after my car was scratched?

You can file a claim if you have scratch insurance. It does not affect the claim during the insurance period. The full name of scratch insurance is Body Scratch Loss Insurance, which is available for family-owned vehicles and non-commercial vehicles. It refers to the insurance company being responsible for compensating for the actual loss when the insured vehicle suffers paint damage on the body surface without obvious collision marks during the insurance period. Under what circumstances can you file a claim: 1. Look at the cause of the car damage: Whether you can file a claim for car damage is closely related to the cause of the damage. For example, if the car's tire is damaged alone during driving, the insurance company can refuse to compensate. This is because tires are consumables, and damage caused during use that is not due to an accident can be refused by the insurance company. So before applying, check whether your car damage was caused by an accident. 2. Check whether you have purchased the relevant car insurance: Whether you can file a claim for car damage also depends on whether you have purchased the relevant car insurance. Apart from compulsory traffic insurance, other car insurances can be freely chosen by the car owner. Different types of car insurance cover different aspects, so when filing a claim, check first whether you have purchased the relevant insurance. 3. Check whether it is within the scope of compensation: Some cases of car damage are not within the scope of compensation, such as damage caused by human factors, which the insurance company can refuse to compensate. So when filing a claim, check first whether the cause of the car damage is within the coverage scope.
10
0
Share

How Long is the Regional License Plate Selection Time?

Regional license plate selection time generally ranges between 90 seconds to 3 minutes. Below is relevant information about car license plate selection: 1. Time Regulation: There is no unified standard for the time limit in vehicle management office selections. Some regions allow only 90 seconds for 50-to-1 selection, while others provide 120 seconds, and some even allocate 3 minutes for the selection. Taking 90 seconds as an example, the system usually highlights the first license plate number by default when the selection begins. 2. Selection Rules: During the selection period, you can freely switch between license plate numbers. However, if no preferred number is selected within the 90 seconds, and the confirm button is not clicked, the system will automatically select the first license plate number once the time limit is reached.
8
1
Share

How to Remove the Car Seat Headrest?

There is a plastic button located below one side of the two support rods of the car headrest. Pressing it allows you to move and adjust the headrest position vertically. While pressing the button, pull the headrest upwards completely to remove it. Relevant information is as follows: 1. Car Headrest: The car headrest is one of the mandatory national vehicle certification inspection items. There are strict regulations regarding the material, strength, energy absorption, position, and size of the headrest. 2. Function: The main function of the car headrest is to protect the fragile neck of the human body in the event of a rear-end collision (according to relevant statistics, neck sprains are one of the most common injuries in car accidents), while also providing cushioning for the head. Without a headrest, the strong impact from a collision would directly compress the fragile neck, causing damage to the spine, which could lead to paralysis or even life-threatening injuries in severe cases. Therefore, vehicle occupants must not overlook the importance of the headrest.
11
5
Share

How to Conduct a Speed Test for Vehicles?

Vehicle speed can be tested using navigation software. Below is relevant information about vehicle speed: 1. Definition: Vehicle speed refers to the distance a vehicle travels per unit of time, commonly measured in kilometers per hour or meters per second. 2. Overview: Vehicle speed is one of the three key parameters describing traffic flow and holds significant importance in traffic flow theory research. It can also broadly refer to the speed of motor vehicles. To suit different purposes, vehicle speed is mainly categorized into spot speed, segment speed, and design speed.
14
0
Share

What are the precautions after a car has just been tinted?

Precautions after car window tinting include avoiding car washing for three days to prevent the film from peeling off due to moisture; avoid rolling the windows up and down within the first week after tinting; if the film becomes loose during washing, return to a professional tinting shop for re-fixing by specialists to ensure effectiveness and durability. Avoid washing the car within three days after tinting: To prevent the film from peeling off due to moisture. Also, avoid turning on the rear window defroster for a week, as moisture can adversely affect the defroster lines. After installation, the film surface can be wiped with a wet towel, sponge, or soft cloth. Additionally, a foggy appearance due to water vapor may be noticed inside the film after tinting. This is a normal phenomenon during the drying process of the solar film and will gradually disappear over time. Avoid rolling the windows up and down within the first week after tinting: Especially for newly tinted cars, the solar film takes about 5-7 days to firmly adhere to the window. During this period, the edges of the film are prone to wear and curling from window movement, and the not fully bonded film may also shift. If the film becomes loose during washing: Return to a professional tinting shop for re-fixing by specialists to ensure effectiveness and durability. If stains appear on the film surface, do not use chemical solvents for cleaning. Instead, use a cleaning wet towel, water-dampened tissue, or cloth with dishwashing liquid for cleaning.
1
4
Share

How to Turn Off the Rear Wiper on an Old Focus?

The method to turn off the rear wiper on an old Focus is: Press the knob marked with 'O' on the side of the wiper control lever. The wiper is an important accessory installed on the windshield, designed to remove rain, snow, and dust that obstruct the view, playing a significant role in driving safety. When the wiper blade fails to clean effectively, you can soak the removed blade in water, lightly sand it with fine sandpaper, then rinse and reinstall it. The old Focus has a body length of 4534 mm, width of 1823 mm, height of 1483 mm, and a wheelbase of 2648 mm.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.