What is the Genesis?

1 Answers
PaisleeRose
07/24/25 8:33pm
Genesis is a Hyundai Motor brand, positioned as a mid-to-large-sized car. Taking the 2012 Genesis as an example, its body dimensions are: length 4985mm, width 1890mm, height 1480mm, with a wheelbase of 2935mm, a fuel tank capacity of 73 liters, and a trunk capacity of 450 liters. The 2012 Genesis features a multi-link independent front suspension and a multi-link independent rear suspension. It is equipped with a 3.0L naturally aspirated engine, delivering a maximum horsepower of 272 PS, a maximum power of 200 kW, and a maximum torque of 304 Nm, paired with an 8-speed automatic transmission with manual shift mode.
Was this review help?
2
1
Share
More Forum Discussions

What Causes Abnormal Noises from Car Tires?

Abnormal noises from car tires may be caused by the following reasons: 1. Foreign objects stuck on the tire surface, which can produce a "popping" sound while driving. 2. Small stones lodged in the tire grooves, which should be removed promptly. Alternatively, a punctured tire or uneven tire pressure among the four wheels can also cause abnormal noises. 3. Worn-out brake pads that are too thin may produce a metallic scraping sound. 4. Abnormal noises from the wheel bearings. 5. Excessive tire pressure, leading to loud tire noise while driving. 6. Deformed, bulging, or severely worn tire treads, which can generate a low "thudding" sound during driving.
20
1
Share

Why Does the Car Air Conditioning Compressor Keep Starting and Stopping Repeatedly?

Frequent start-stop cycling of the car air conditioning compressor indicates a compressor protection malfunction. The specific reasons are as follows: 1. Overheating protection: Prolonged operation due to insufficient refrigerant (system low on Freon); prolonged operation due to system blockage (ice blockage or dirt blockage); excessively high ambient temperature; damaged compressor overheating protection device. The compressor can restart once its temperature decreases. You can pour water on the compressor for rapid cooling, then investigate the cause of the protection trigger. 2. Overcooling protection: Extremely low ambient temperature (below -15°C). 3. Overcurrent protection: Damaged starter capacitor; prolonged operation due to excessive refrigerant charge; low voltage; compressor internal failure.
6
0
Share

What types of oil pumps are commonly used in automatic transmissions?

In the oil supply system of automatic transmissions, there are two types of oil pumps: fixed displacement pumps and variable displacement pumps: 1. Commonly used fixed displacement pumps include: (1) Internal gear pumps: Internal gear pumps are the most widely used type of oil pump in automatic transmissions. They feature compact structure, small size, light weight, strong self-priming capability, and minimal flow fluctuation. (2) Rotor pumps: These are a type of internal gear pump with special tooth profiles, characterized by simple structure, compact size, smooth operation, and excellent high-speed performance. (3) Vane pumps: Composed of a stator, rotor, vanes, housing, and pump cover, they have a complex structure and are sensitive to hydraulic oil contamination. 2. Variable displacement pumps are designed by modifying the vane pump in automotive automatic transmissions to have variable displacement. The oil delivery volume of a variable displacement pump stops increasing once the engine speed exceeds a certain threshold, thereby reducing the operational resistance of the pump at high speeds and improving the vehicle's fuel economy.
6
3
Share

What does cruise mean in a car?

Refers to the car's electronic cruise control system. When this system is activated, the driver can set the vehicle to maintain a fixed speed, allowing the car to accurately travel at the preset speed. Cruise control should not be used in the following situations: 1. In principle, cruise control is designed for use on highways or fully enclosed roads. On non-enclosed roads, complex road conditions can compromise traffic safety. 2. It is prohibited in rainy weather and snowy/icy conditions. 3. It should be disabled on winding mountain roads or roads with excessive curves. Under normal circumstances when navigating curves, appropriate acceleration is needed to provide greater steering force. In cruise control mode, the vehicle automatically maintains a constant speed with the throttle controlled by the onboard computer, which can often pose dangers when driving on curved roads. Under such conditions, the speed should be appropriately controlled. 4. Cruise control is also unsuitable on roads with heavy traffic.
18
0
Share

Under normal circumstances, how many years should tires be replaced?

After 2-3 years of use, small cracks will gradually appear on the sidewalls of the tires. If a large number of fine cracks are found on the tire sidewalls, the tires need to be replaced. The following is relevant information about tires: 1. The wear lifespan of tires is 30,000-50,000 kilometers. If the tires have not reached the wear limit or mileage, but have been in use for 5 years or have developed numerous cracks on the sidewalls, they should be replaced. 2. The main component of tires is rubber, and the maximum storage and anti-aging time for rubber, from natural latex to EPDM and nitrile, does not exceed 10 years. The average service life of various rubber products in use is 3-5 years. 3. Tires bear the weight of the entire vehicle, often serve to cushion impacts, and must also resist corrosive rainwater and car wash cleaning solutions. Therefore, the aging of tires can be significantly accelerated.
6
5
Share

What brand of engine is the sqre4t15c?

sqre4t15c is an engine produced by Chery, which is a 1.5-liter turbocharged engine. This engine is equipped on the Arrizo GX. Below are some relevant details about this engine: 1. The sqre4t15c engine complies with the latest China VI emission standards. The Arrizo GX is a compact family sedan under the Chery brand. 2. The sqre4t15c engine delivers 156 horsepower and a maximum torque of 230 Nm. The engine's maximum power is achieved at 5500 rpm, and the maximum torque is available between 1750 to 4000 rpm. 3. This engine features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. Although the cast iron cylinder block is heavier, it can withstand higher temperatures and pressures, offering better reliability and durability.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.