What is the general speed of a car in kilometers per hour?

1 Answers
JoannaDella
07/24/25 8:32pm
Here is an introduction related to car speed: 1. Article 78: Highways should indicate the driving speed of the lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not lower than 60 kilometers per hour. 2. For roads with 2 lanes in the same direction: the minimum speed of the left lane is 100 kilometers per hour; for roads with 3 or more lanes in the same direction, the minimum speed of the leftmost lane is 110 kilometers per hour, and the minimum speed of the middle lane is 90 kilometers per hour. If the speed indicated by the road speed limit signs is inconsistent with the above lane speed regulations, the speed indicated by the road speed limit signs should be followed.
Was this review help?
7
2
Share
More Forum Discussions

What are the causes of transmission failure in Focus?

Transmission failure in Focus is mainly caused by internal contamination and high temperature. The specific reasons are as follows: 1. Internal contamination of transmission: Many cases of automatic transmission failure are not caused by valve body damage, but by persistent dirt and impurities inside, especially when contaminants accumulate in the valve body causing blockages. This prevents effective regulation of oil pressure, leading to jerking, impact, and slippage issues. 2. High temperature damaging transmission: High temperature degrades the quality and friction characteristics of automatic transmission fluid, increasing friction and wear. This results in transmission noise and sludge formation inside the transmission, causing jerking and impact. When temperature exceeds 120°C, rubber sealing materials begin to harden, eventually leading to leaks and reduced hydraulic pressure. At even higher temperatures, the transmission starts slipping, which in turn causes further temperature rise.
16
4
Share

How to Polish Car Paint to a Mirror Finish?

Wash the entire vehicle to prevent particles and dust from causing new scratches during the polishing process. Sand with wet sandpaper. Before polishing, use wet sandpaper wrapped in water to sand the surface until it is smooth. Apply polishing compound for fine polishing. Then use a polishing machine with a mirror-finish treatment agent to remove swirl marks left by the coarse polishing compound. Finish with manual polishing.
11
0
Share

Can Castrol 30 and 40 engine oils be mixed?

Any base oils can be mixed, but engine oils are not recommended for mixing due to different additives that may cause chemical reactions and degrade oil performance. However, oils from the same brand have roughly the same additive formula, so Castrol 30 and 40 engine oils can be mixed. Engine oil specifications: Engine oil specifications include two parts: classification and viscosity grade. Oil classification is represented by a combination of two letters, such as SA. Oil viscosity is usually indicated by SAE grades, such as 5W-40. 'S' stands for gasoline engine oils, with general specifications ranging from SA to SN (in alphabetical order, excluding SI). Each subsequent letter indicates better oil performance than the previous one. The numbers following the oil classification represent its viscosity grade. 'W' stands for winter, and the smaller the number before it, the better the oil's low-temperature fluidity, indicating it can be used in lower environmental temperatures and provides better engine protection during cold starts. The number after 'W' indicates the oil's high-temperature resistance, with higher numbers representing better protection at high temperatures. Castrol: Castrol is a globally recognized lubricant expert and a subsidiary brand of BP (British Petroleum).
16
4
Share

What are the classifications of engine oil?

Engine oil is divided into mineral oil, semi-synthetic oil, and fully synthetic oil. In addition to these major categories, engine oil is also classified by operating temperature. The commonly used antifreeze index is 5W, while the high-temperature index mostly ranges between 30-40, which can basically meet the needs of most engines. Mineral oil is extracted from minerals and is relatively viscous. It was widely used in the past but is gradually being replaced by synthetic oil. Synthetic oil is artificially formulated through chemical processes. Fully synthetic oil offers the best performance. If your vehicle has a turbocharged (T) engine, it is recommended to use fully synthetic oil due to its excellent smoothness and cleanliness, as well as a longer replacement interval. Semi-synthetic oil is a blend of synthetic and mineral oil, offering performance between the two, with a moderate price and replacement interval. For ordinary naturally aspirated engines, semi-synthetic oil can be used. In addition to the major categories, engine oil is also classified by operating temperature. When selecting engine oil, you will notice that each type has a rating, such as 5W-40 or 0W-30. The number before the "W" represents the antifreeze index, indicating the lowest temperature at which the oil can function normally. Generally, 5W-rated oil is sufficient unless you are in extremely cold northern regions. The number after the "W" indicates the oil's viscosity in high-temperature environments—the higher the number, the greater the viscosity.
7
2
Share

What to Do When Your Car Gets Scratched in a Roadside Parking Spot?

Notify the insurance company to file a claim. Within 48 hours, bring the original insurance policy, vehicle registration, driver's license, and the insured's ID card to the insurance company to formally file the claim. If you purchased scratch insurance at a 4S store, you can directly call the 4S store. The store's claims adjuster will handle the entire process, and the 4S claims personnel will negotiate with the staff.
9
1
Share

How to Fold Car Mirrors?

First, enter the central control and select vehicle settings. Find the central door lock in the system menu, then choose the option to fold mirrors when locking the car, and simply check the box to enable it. When folding is required, the driver must reach out the window or exit the vehicle to fold the mirrors, which is both inconvenient and unsafe. A more common method has the advantage of allowing the driver to fold the mirrors from inside the car, and the mirrors will automatically unfold when the vehicle is started.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.