What is the gear operation introduction of Changan CS75PLUS?

1 Answers
DePatrick
07/29/25 8:09am
The operation methods of each gear of Changan CS75PLUS are as follows: P is the parking gear, used when parking (when turning off the engine). R is the reverse gear, N is the neutral gear, used for temporary parking. D is the drive gear, in this gear the transmission will automatically switch between 1-5 gears based on speed and throttle conditions. M is also the drive gear, in this gear the transmission switches to manual mode. Changan CS75PLUS is a compact SUV with dimensions of 4700*1865*1710mm and a wheelbase of 2710mm. The vehicle is equipped with a 2.0L turbocharged engine, paired with an 8-speed automatic manual transmission, delivering a maximum horsepower of 233Ps and a maximum power of 171kW. Other gears that may appear in automatic transmission vehicles include S gear and L gear. S stands for sport mode, in this gear the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer time, increasing vehicle power but also fuel consumption. L stands for low gear, in this gear the transmission will stay in 1st gear without shifting up. Press the vehicle brake, hold the button on the gear lever with your right thumb, push the lever backward for D gear, push it forward for N gear, and push it forward once more for R gear. After parking the vehicle, no matter which gear it is in, pressing the P button on the gear lever will return the vehicle to P gear.
Was this review help?
11
4
Share
More Forum Discussions

What are the city license plate codes for Shaanxi Province?

Shaanxi Province's city license plate codes are as follows: Shaan A is Xi'an City, Shaan B is Tongchuan City, Shaan C is Baoji City, Shaan D is Xianyang City, Shaan E is Weinan City, Shaan F is Hanzhong City, Shaan G is Ankang City, Shaan H is Shangluo City, Shaan J is Yan'an City, Shaan K is Yulin City, Shaan V is Yangling Agricultural Demonstration Zone. License plates are plates hung on the front and rear of vehicles, typically made of aluminum, sheet metal, plastic, or paper, inscribed with the vehicle's registration number, registration region, or other relevant information. The license plate number is a legal mark registered by statutory authorities, permitting the vehicle to operate on the road, and serves as the identification number for the vehicle.
11
2
Share

Where is the daytime running light switch for the CS75?

cs75 daytime running lights do not have an independent switch. When the Changan CS75 vehicle is started, the daytime running lights will automatically turn on. Daytime running lights are lamps that make the vehicle more easily recognizable during daytime driving. These lamps are not for illumination but serve as signal lights. Daytime running lights can improve visibility and make the vehicle more conspicuous. This technology, specifically researched for daytime use, is more direct and effective than existing lighting devices. If equipped with daytime running lights, road users can detect and recognize the vehicle earlier and better. In the dark, if the driver turns on the regular headlights, the daytime running lights will automatically turn off. The CS75 has a body length, width, and height of 4650mm, 1850mm, and 1695mm respectively, with a wheelbase of 2700mm.
18
5
Share

Is It Normal for the Rear Wheels to Have Uneven Gaps Between the Wheel and the Wheel Arch?

It is not normal for the rear wheels to have uneven gaps between the wheel and the wheel arch. One side being higher than the other could be due to a significant difference in tire pressure between the left and right sides, excessive load on one side of the vehicle, or a damaged shock absorber on one side. A vehicle with one side higher than the other can compromise its balance and stability. In such cases, it is necessary to promptly identify the cause of the issue and carry out repairs. A significant difference in tire pressure between the two sides is also a common issue. In this case, it is necessary to check whether the tires are damaged or leaking. If a tire is damaged or leaking, it needs to be replaced. It is best to replace a pair of tires at the same time. Replacing only one tire may also affect the driving experience. Excessive load on one side of the vehicle can also cause the body to be higher on one side than the other. This is often due to the shock absorber system reaching the end of its lifespan. At this point, the shock absorber system can no longer provide sufficient support for the vehicle. The solution is to replace the shock absorbers and springs. In vehicles that have been in use for a long time, the shock absorber system is prone to failure. Common issues with the shock absorber system include oil leakage from the shock absorbers and loss of elasticity in the shock absorber springs. Both of these problems can lead to insufficient support from the shock absorber system, resulting in uneven height on both sides of the vehicle. The solution is to replace the shock absorber system.
3
1
Share

What does the red key warning light on the dashboard mean?

The reasons for the red key warning light on the dashboard: There are two types of dashboard key flashing red lights. One type does not have a KEY symbol and is the engine immobilizer indicator light. If this light is on, it indicates a fault in the anti-theft system, and you should take your car to a 4S shop or auto repair shop for inspection. The other type has a KEY symbol, which indicates that the car key battery is low. You should check it immediately to determine whether the battery needs to be replaced. If the battery is low, it should be replaced as soon as possible to avoid inconvenience in using the car. The dashboard is a rigid panel or structural component used to install instruments and related devices. It can be classified into screen-type dashboards, frame-type dashboards, channel-type dashboards, and cabinet-type dashboards. Some indicators and warning lights are also included.
14
0
Share

Why Does Brake Fluid Need to Be Replaced?

Brake fluid needs to be replaced because: after a certain period of use, the boiling point of brake fluid decreases, it becomes contaminated, and undergoes varying degrees of oxidation and deterioration. Brake fluid absorbs moisture from the air, and the hydraulic braking system must allow the brake fluid to be exposed to the atmosphere to function properly. Over time, the brake fluid absorbs moisture, which turns into bubbles under high temperatures. When bubbles form in the brake fluid lines, braking efficiency decreases. Therefore, brake fluid should be regularly checked for quality and performance based on climate, operating environment, seasonal changes, and working conditions, and replaced on schedule. Brake fluid should generally be replaced every two years or 50,000 kilometers. When selecting brake fluid, different types should not be mixed to avoid chemical reactions that could affect braking performance.
14
0
Share

Why is a car considered totaled after being submerged in water?

It is not always the case that a car is considered totaled after being submerged in water. Here are the relevant details: 1. Water-crossing vehicle: Water reaches the wheels, but the interior remains dry. This is commonly referred to as a water-crossing situation, which is relatively common and generally causes no damage to the vehicle. 2. Water-damaged vehicle: Water reaches halfway up the wheels, and the interior is flooded up to below the dashboard (generally called a water-damaged vehicle). This situation causes damage to the vehicle's performance, but with professional treatment, the car can still be used. 3. Flood-damaged vehicle: The water level exceeds the wheels, and the interior is flooded up to the dashboard (generally called a flood-damaged vehicle). In such cases, the water level has already caused severe damage to the engine, transmission, and electrical systems, and it is not recommended to continue using the vehicle even after repairs.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.