What is the fuse number for the Cruze air conditioner?

2 Answers
SanBrody
09/04/25 7:08am
Chevrolet Cruze commonly uses high-current fuses and medium-low current fuses. The medium-low current fuses are generally more accessible. Medium-low current fuses can be roughly divided into blade fuses (including automatic fuse box mini fuses), plug-in fuses, screw-in fuses, tubular fuses, and flat fuses. Here is more information: 1. International standard for fuse colors: 2A gray, 3A purple, 4A pink, 5A orange, 7.5A brown, 10A red, 15A blue, 20A yellow, 25A transparent, 30A green, and 40A dark orange. Different amperage ratings can be clearly distinguished by their colors. 2. Function: Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will melt within seconds to protect the circuit. They are commonly used for overcurrent protection in automotive circuits and also for overcurrent protection in industrial equipment.
Was this review help?
9
1
Share
Sanders
09/16/25 7:58am
I've been driving a Cruze for several years. Common issues with the AC fuse are usually related to F15 or F21, depending on the model year. For example, models from 2008 to 2012 often use F15, while those after 2013 may use F21. The fuse is located in the engine compartment fuse box, the black box in front of the driver's seat, with a labeled diagram on the cover. A blown fuse is mostly caused by compressor overload or a stuck fan leading to excessive current. When checking it yourself, first turn off the engine, wait a few minutes before opening the box to test, using a multimeter or checking if the glass tube inside is broken. When replacing the fuse, choose the same amperage, either 15A or 20A, as using the wrong one can cause it to fail again. It's advisable to keep a few spares, especially during summer when high temperatures make issues more likely. If you're unsure, just go to a repair shop to avoid damaging more components and save time and effort. Always wear gloves when handling to prevent short circuits—safety first.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What engine does the Vision use?

Taking the 2017 Vision as an example, there are two types of engines used in the Vision: one is a 1.3-liter inline 4-cylinder turbocharged engine, and the other is a 1.5-liter inline 4-cylinder naturally aspirated engine. The 1.3-liter inline 4-cylinder turbocharged engine is paired with a 6-speed manual transmission, while the 1.5-liter inline 4-cylinder naturally aspirated engine is matched with either a 5-speed manual or a 4-speed automatic transmission. The Vision is a sedan under the Geely brand, positioned as a compact car. In terms of body dimensions, the Vision measures 4590mm in length, 1734mm in width, and 1470mm in height, with a wheelbase of 2600mm. Externally, the Vision features a meticulously designed body shape that pursues a high-style, dynamic, and high-quality design. By perfectly combining robust tension with a fashionable and dynamic style, it embodies an unforgettable noble and elegant presence with smooth sophistication.
15
3
Share

What are the dimensions of the Haval H4?

The dimensions of the Haval H4 are 4410mm in length, 1845mm in width, and 1695mm in height, with a wheelbase of 2660mm. The Haval H4 is a compact SUV under the Haval brand. In terms of power, the vehicle is equipped with a low-power version of a 1.5-liter inline 4-cylinder turbocharged engine, paired with either a 6-speed manual or 7-speed dual-clutch transmission, delivering a maximum power of 110KW and a maximum torque of 210NM. In terms of appearance, the Haval H4 features all-LED lighting that is as dazzling as stars, blending elegant temperament with dynamic edges. The body adopts a dual-waistline design with a low front and high rear, presenting an elegant posture. The rear features a new bumper design, with the exhaust pipe style optimized to a dual exposed cannon-shaped design, enhancing the sporty atmosphere.
2
0
Share

How to Fold the Rearview Mirror of a Honda Fit?

To fold the rearview mirror of a Honda Fit, you need to manually push the mirror inward. The rearview mirror is a tool that allows the driver to directly obtain external information about the rear, sides, and lower parts of the car while seated in the driver's seat. For the convenience of the driver and to prevent traffic safety accidents and ensure personal safety, all countries require that cars must be equipped with rearview mirrors, and all rearview mirrors must be adjustable in direction. The Honda Fit is one of Honda's global strategic models following the Accord and Civic. In terms of body dimensions, the Fit measures 4065mm in length, 1695mm in width, and 1525mm in height, with a wheelbase of 2530mm. Exterior-wise, the Fit adopts Honda's new family-style front face design concept "Solid Wing," where the front grille integrates with the headlights, highlighting a sharp and cool look. The side of the body features a unique and cool blade-style double waistline design, giving it a dynamic forward thrust that makes people want to try it out.
18
2
Share

What are the main tasks in car maintenance?

Car maintenance mainly includes: 1. Checking and replenishing fuel and lubricants; 2. Cleaning the interior and exterior of the vehicle, as well as the engine and chassis; 3. Checking the oil levels in the generator, transmission, rear axle, and steering gear; 4. Adding lubricants as specified, ensuring all parts of the vehicle have fully equipped and effective oil nozzles for proper lubrication; 5. Checking the connection and tightness of the steering gear, tie rods, and steering arms. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. Its main purpose is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, slow down the deterioration process, and extend the service life.
11
2
Share

How to Solve the Failure of Car Power Steering System?

Adjust the steering wheel while driving, and pull over immediately after turning to check the cause of the failure and determine whether the vehicle can continue to be driven. Below is some extended information about the car steering system: 1. Basic Introduction: The car steering system is a power steering system, which means it uses external force to allow the driver to complete steering with less effort. Initially, this system was used in large vehicles, but now it is commonly applied to various car models. Thanks to power steering, driving becomes much easier, and to some extent, it improves driving safety. If the steering system warning light turns yellow, it indicates partial failure of the steering system, requiring more effort to operate the steering wheel. If the steering system warning light turns red, it means the steering system has completely failed, and operating the steering wheel requires significant effort. 2. Fault Analysis: During the operation of the electric power steering system, it is affected by various factors such as road conditions, frequent steering, vehicle vibrations, and external interference. After prolonged use, various components of the system may experience mechanical failures, short circuits, open circuits, aging of electronic components, poor contact, overheating, and other abnormal conditions. The types of failures are complex and numerous. Analyzing every possible abnormal or faulty condition of each component would be cumbersome and unnecessary, as many faults have similar impacts on the component's output and the overall EPS operation. If the electronic power steering fails, it is advisable to go directly to a 4S shop or repair shop for more detailed inspection and repair.
20
3
Share

What Are the Effects of Insufficient Brake Fluid?

Brake fluid is a liquid that enhances the braking performance in a vehicle's transmission system. Insufficient brake fluid can lead to the car's inability to brake effectively. Below is a detailed introduction to the effects of insufficient brake fluid and the precautions for its use: Effects: Brake fluid transmits the driver's braking force to the vehicle's brakes. The quality of the brake fluid and whether it is used properly directly affect the vehicle's braking performance and driving safety. When the brake fluid is insufficient, it is crucial not to continue driving, as air can enter the brake lines or wheel cylinders. Since air is compressible, it can cause insufficient pressure in the wheel cylinders, leading to inadequate braking or brake failure. Precautions for Brake Fluid Use: If gasoline, diesel, or windshield washer fluid is mixed into the brake fluid, it can severely impair braking effectiveness, and the fluid should be replaced immediately. For vehicles that have traveled 40,000 kilometers under normal driving conditions or have used the same brake fluid for over two years, the brake fluid may deteriorate due to prolonged use, so timely replacement is necessary. Vehicles equipped with a brake fluid level warning device should have the warning light monitored regularly to ensure the sensor is functioning correctly. When the brake fluid is low, it should be replenished promptly. The stored brake fluid should always be maintained between the minimum and maximum capacity marks.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.