···
Log in / Register

How to Adjust Steering Wheel Play?

1Answers
MacBrynlee
07/25/2025, 03:32:19 AM

Have one person firmly hold the steering drop arm while another turns the steering wheel. If there is excessive free rotation, it indicates looseness in the steering gear which requires adjustment. Otherwise, continue with further inspection. Have one person turn the steering wheel while another observes whether there is looseness in the ball joints of the steering linkage mechanism. If looseness is found, adjustments should be made or worn components should be removed and replaced.

Was this review help?
112
Share
More Q&A

What is the method for quick car paint touch-up?

The method for quick car paint touch-up is: 1. Clean the scratched area thoroughly; 2. Soak the sandpaper in water and wrap it around a hard cotton block; 3. Sand the scratched area smooth with the sandpaper; 4. Prepare tape and a cloth to cover areas that don't need touch-up; 5. Combine the touch-up pen with the mini spray can; 6. Start spraying from a certain distance from the scratch; 7. Spray blending clear coat on the touched-up area and let it dry. Another method for car paint touch-up is: Using chilled cola to repair, pour a small amount of cola onto a cloth and continuously wipe the scratched area.
114
Share

What are the channels for nearly new cars?

Most of them come from new car dealerships, even 4S stores. Here is relevant information about precautions for using new cars: 1. Avoid overloading: Carrying too many items during the break-in period may damage mechanical components. Since the power transmission parts of a new car haven't fully worn in yet, aggressive acceleration will cause irreversible damage to the vehicle. Therefore, it's essential to follow the principle of "better slow than fast" during the break-in period. 2. Speed limits for new cars: Domestic cars generally range between 40 70 km/h, while imported cars are typically around 100 km/h. When the throttle is fully open, the speed shouldn't exceed 80% of the maximum speed. The engine speed during the break-in period should be maintained between 2,000 4,000 rpm.
113
Share

What is the wiper size for the Highlander?

Toyota Highlander uses 26/20-inch wipers with a U-type interface. There is no fixed replacement cycle, but they should be repaired or replaced promptly when abnormal noise occurs or they fail to clean effectively. The recommended replacement cycle is 8-12 months, especially during the spring and autumn seasons when there is more rainfall. Timely replacement ensures travel safety, and the rubber wiper blades should also be replaced when they age over time. Additional information: Wipers should be replaced under the following conditions: 1. Multiple horizontal streaks appear on the windshield after wiping. 2. Areas are missed during wiping (caused by aging rubber blades). 3. There is shaking noise (due to loose wiper joints, excessive gaps, or improper angle adjustment).
119
Share

How many hours does it take to charge a car battery when the car won't start?

If the battery is dead and you want to charge it using the engine, taking a 12V60Ah battery as an example, the charging method involves constant voltage with current limiting. Charge at 14.8V constant voltage and 15A current limiting for 16 hours, followed by 3A constant current charging for 4 hours, totaling 20 hours. The required charging time is relatively long. Here are some additional tips: The most familiar and effective emergency starting method is push-starting, but this is a last resort and should not be used frequently. This method can cause some damage to the engine and clutch, especially in automatic transmission vehicles, which should avoid using this method. To avoid being unable to charge when the battery is dead, car owners should keep a set of jumper cables in the car, which can be purchased at most auto parts stores.
101
Share

Will I Get Penalty Points for Driving at 60 in a 40 km/h Ramp Speed Limit Zone?

Driving at 60 km/h in a 40 km/h ramp speed limit zone constitutes speeding, which will result in a 3-point penalty and a fine. Below are precautions for driving on highway ramps: 1. Reduce speed in advance: Before entering the highway ramp, you should slow down in advance, pay attention to the speed limit signs beside the ramp, and avoid overtaking on the ramp. 2. Entering the main lane: When approaching the ramp intersection, do not immediately enter the main lane. Instead, first enter the acceleration lane to increase your speed to the required level, and then merge into the main lane safely. 3. Avoid missing the ramp exit: Before reaching the ramp exit from the main lane, reduce your speed in advance, pay attention to the ramp signs, and avoid driving over the guide lines to prevent missing the ramp exit. Once missed, you cannot make a U-turn and must exit at the next available exit.
110
Share

How Long Does It Usually Take from BMW Production Line to Delivery?

BMW delivery usually takes about 15 to 30 days. The following points should be noted when picking up the car: 1. Verify contract information: When signing the contract, check whether the vehicle information and the promises made by the dealership are consistent. Other contents can be ignored as they are mostly standardized. 2. Choose an insurance company: Generally, there are several insurance companies to choose from at the 4S dealership. Basic insurance includes (compulsory traffic insurance, vehicle damage insurance, third-party liability insurance, and vehicle and vessel tax). Other types of insurance can be purchased according to personal requirements. The new version of insurance includes glass insurance, spontaneous combustion insurance, and water damage insurance. 3. Select a license plate number: There are no additional fees apart from the official cost. Be sure to refuse any unauthorized charges during the process. There are only two ways to choose a license plate: self-selection or random selection.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.