What is the function of the evaporator?

1 Answers
VanDavid
07/29/25 10:07am
The function of the evaporator is to evaporate the low-pressure refrigerant from the expansion valve, absorbing heat from the air inside the vehicle, thereby achieving the purpose of cooling the interior. The car air conditioning evaporator is located inside the car's evaporator box. The causes of its failure are: 1. The adjustment of the expansion valve is too small, resulting in excessively low low-pressure; 2. Insufficient refrigerant in the system, leading to excessively low evaporation pressure; 3. Clogged internal circulation filter; 4. Malfunctioning temperature sensor, causing the compressor to not shut off. The solutions for car air conditioning evaporator failure are: 1. Check if the position of the temperature control sensing bulb is correct; 2. Replace the temperature control regulator; 3. Check if there is a fault in the air conditioning computer's control.
Was this review help?
12
4
Share
More Forum Discussions

How to Control Speed When Driving an Automatic Car Down a Long Slope?

To control speed when driving an automatic car down a long slope, follow these methods: 1. Release the accelerator in advance to descend at a low speed; 2. Shift the vehicle's gear to L (Low) mode. The starting procedure for an automatic car is: 1. Sit in the driver's seat and press the start button to activate ACC mode; 2. Press the start button again for vehicle self-check; 3. Depress the brake pedal and press the start button to ignite the engine; 4. Press the foot brake, shift to D (Drive) mode, and release the handbrake. Automatic transmissions eliminate manual gear shifting by automatically selecting appropriate gears based on driving speed and traffic conditions. The gear positions include: 1. P (Park) - Parking/Starting position; 2. R (Reverse) - Reverse gear; 3. N (Neutral) - Neutral position; 4. D (Drive) - Forward driving mode; 5. L (Low) - Low-speed mode; 6. S (Sport) - Sports mode.
12
2
Share

Do vehicles need to undergo annual inspections after 6 years?

Vehicles are required to undergo annual inspections after 6 years. The inspection items include: 1. Checking whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and effective, and whether the paint surface is uniform and aesthetically pleasing; 2. Testing the vehicle's braking performance, steering control, lights, exhaust, and other safety performance; 3. Verifying whether the vehicle has been modified, altered, or transformed, and whether the driving license, license plate, and vehicle registration records match the actual condition of the vehicle. Annual inspection is a mandatory test for all vehicles that have obtained official license plates and driving licenses. Its purposes are: 1. To promptly eliminate potential safety hazards of the vehicle; 2. To encourage and strengthen vehicle maintenance, thereby reducing the occurrence of traffic accidents.
12
5
Share

Which Position is the One-Third Point of the Hood?

The one-third point of the hood is located approximately 10 to 15 centimeters from the headlights. The functions of the hood include: 1. Airflow diversion; 2. Protecting the engine and surrounding pipeline components; 3. Assisting driving vision by effectively adjusting the direction of reflected light; 4. Preventing accidents; 5. Isolating heat generated during engine operation. Methods to open the hood include: 1. Lift the handle upward, then raise and support the hood; 2. Push the hood latch switch to the right and lift the hood; 3. Rotate the emblem counterclockwise, then use a key to turn it clockwise, open the hood, and support it; 4. Pull the front left switch outward by hand, then support the hood after opening; 5. Press the hood lock upward with your fingers, open the hood, and support it.
3
0
Share

What is the fuel tank capacity of the Zongshen 200 three-wheeled motorcycle?

Zongshen 200 three-wheeled motorcycle has a 26L fuel tank. The basic introduction of the Zongshen 200 three-wheeled motorcycle is as follows: Customizable processing, model is 200zh, displacement can reach 200ml, overall dimensions are 3880mm, curb weight is 620kg, maximum speed can reach 90km/h, fuel consumption per 100km is 4.5L, engine model is Tsunami engine, rated power is 24kw, CNG bottle capacity is 12L, engine displacement is 200L, engine maximum power can reach 4000kw, engine maximum torque is 145, rear wheel track is 1650mm, cargo box size is optional, unladen weight is 660kg, compression ratio is 0.2, fuel tank capacity is 26L, wheelbase is 1700mm, maximum load can reach 4000kg, maximum noise is 0.8db. Ways to reduce fuel consumption are as follows: Clean or replace the air filter on time to ensure the engine's air-fuel ratio is normal. Do not rigidly follow the cleaning or replacement cycle of the air filter as stated in the motorcycle maintenance manual, because the location and usage environment of the motorcycle vary. If the motorcycle usage environment and air quality are good, the cleaning and replacement cycle of the air filter can be extended. If the motorcycle usage environment is harsh, it is necessary to frequently check, clean or replace the air filter (observe the cleanliness and air permeability of the air filter surface). After excessive use of the air filter element, the air flow is severely reduced, leading to an overly rich or abnormal mixture ratio and increased fuel consumption. Regularly maintain the fuel supply system (carburetor or fuel injection), clean the spark plug frequently and replace it regularly. Go to a professional repair shop for the above cleaning and debugging. Note: Use a special cleaner for fuel injection throttle valves when cleaning them, and do not use corrosive cleaners such as carburetor cleaners, as this will damage the rubber parts inside the fuel injection throttle valve. Replace the correct type of oil and oil filter on time and according to the season to reduce internal friction in the motorcycle engine. The correct amount of oil is also a key factor. Adding too much or too little oil will cause varying degrees and types of damage to the motorcycle engine and also increase fuel consumption.
5
2
Share

What is the tire model for the 2016 Mistra?

The 2016 Mistra comes with five tire specifications, which are 205/60R16 and 215/50R17. In 205/60R16, the first number 205 represents the tire width of 205MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 16 denotes the rim diameter is 16 inches. The letter "R" in the middle stands for radial tire. In 215/50R17, the first number 215 represents the tire width of 215MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 17 denotes the rim diameter is 17 inches. The letter "R" in the middle stands for radial tire. The tire brand for the 2016 Mistra is Hankook, equipped with aluminum alloy wheels, and the spare tire specification is non-full size. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and at a right angle to the ground; Remove the hubcap and loosen the nuts counterclockwise. Do not fully loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, and then completely remove the nuts; Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also displays the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".
17
1
Share

Is the Commander PHEV a plug-in hybrid?

The Commander PHEV is a plug-in hybrid electric vehicle (PHEV). Unlike regular hybrid electric vehicles, PHEVs feature larger battery packs that can be recharged via external power sources. The Commander PHEV is equipped with a 2.0L turbocharged engine and dual electric motors, delivering excellent fuel efficiency. Unlike conventional hybrids that generate electricity through vehicle operation, PHEVs cannot produce electricity during driving and rely solely on charging for electric propulsion. Plug-in hybrids offer dual fuel/electric driving modes, whereas regular hybrids operate solely on gasoline. Consumers can choose between these options based on personal preferences.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.