What is the function of the button on the front left door edge of the Audi Q5?

1 Answers
OAdrian
07/29/25 8:27pm
The button on the front left door edge of the Audi Q5 is used to monitor the air flow inside the vehicle. Pressing it once will turn it off, and it will automatically turn back on the next time the vehicle is started. After activating the switch, if all occupants exit the vehicle and it is locked, the system will trigger an alarm if there is a fly moving around inside or any disturbance in the air flow, primarily serving as an anti-theft feature. Here is an introduction to the Audi Q5 model: 1. Powertrain: Equipped with a 2.0L turbocharged 4-cylinder DTA engine, delivering a maximum horsepower of 190Ps, paired with a 7-speed wet dual-clutch transmission. 2. Body Dimensions: Length, width, and height are 4770mm, 1893mm, and 1667mm respectively, with a wheelbase of 2907mm. 3. Chassis: The drivetrain features front-engine, all-wheel drive (AWD), with a front suspension consisting of a five-link independent setup and a rear suspension also using a five-link independent configuration.
Was this review help?
20
5
Share
More Forum Discussions

What to Do About Steering Wheel Noise in the Enclave?

Steering column lacks lubrication, resulting in high friction. Check if the power steering fluid is insufficient. Inspect the universal joint for any issues. Examine whether the rubber bushings of the suspension stabilizer bar links on the chassis have aged and hardened. Damaged plain bearing.
1
2
Share

How to Fold Down the Rear Seats of the Honda Haoying?

Enter the car and remove the shoulder strap of the rear seatbelt. Then pull the rear seat release switch in the trunk. Next, fold down the seats. To adjust the headrest of the Honda Haoying seats, use both hands to grasp the sides of the headrest and pull upward to raise the headrest position. To lower the headrest, press the button and move the headrest downward.
20
0
Share

What are the differences between the Mazda6 Atenza 2.0 and 2.5?

Here are the differences between the Mazda6 Atenza 2.0 and 2.5: 1. Fuel consumption difference. The factors affecting a car's fuel consumption are nothing more than the following: the vehicle's weight, displacement, transmission, and driving style. A mere 0.5-liter displacement difference has minimal impact on fuel consumption. The factors that truly significantly affect fuel consumption are the vehicle's weight and driving style, while larger displacement often has little effect. 2. Different engines have their own optimal efficiency RPM ranges. However, larger displacement engines are more powerful, making it harder to reach the ideal RPM during normal driving. The 2.5L engine's optimal efficiency RPM range is between 2500-3000 RPM, but maintaining this RPM may be more fuel-efficient but could also mean exceeding the speed limit. A smaller displacement engine maintaining this RPM might be just right, which is why the 2.0 is more fuel-efficient. 3. Configuration: In terms of engine power, the 2.5L naturally aspirated engine has a maximum power of 192 horsepower (141 kW) at 6100 RPM and a maximum torque of 252 Nm at 3250 RPM. The 2.0L naturally aspirated engine has a maximum power of 158 horsepower (116 kW) at 6400 RPM and a maximum torque of 202 Nm at 4000 RPM.
16
3
Share

What Do Front Overhang and Rear Overhang Refer To?

The meanings of front overhang and rear overhang in automobiles are as follows: 1. The front overhang and rear overhang of a car constitute a shock absorption system. The front overhang refers to the horizontal distance from the center of the front wheel to the front end of the car. The length of the front overhang should be sufficient to secure and install the engine, radiator, steering gear, etc.; 2. The rear overhang of a car is the distance between the vertical plane passing through the centerline of the last wheel axle and the vertical plane touching the rearmost part of the vehicle (including towing devices, license plates, and any rigid components fixed at the rear of the vehicle) and perpendicular to the longitudinal symmetry plane of the vehicle. Simply put, it is the horizontal distance from the center of the rear wheel to the rearmost part of the car; 3. The length of the rear overhang mainly depends on the length of the passenger compartment, the wheelbase, and the distribution of miscellaneous loads. The rear overhang should not be too long; otherwise, the departure angle will be too small, and the turning will not be flexible; 4. Therefore, Chinese regulations stipulate that the rear overhang of buses and enclosed vehicles must not exceed 65% of the wheelbase, and the rear overhang of other vehicles must not exceed 55% of the wheelbase.
6
2
Share

How to Turn Off the Built-in Navigation in Haval?

In the navigation interface, select the second option 'Route' at the bottom, then choose the last option 'Turn Off Navigation' to cancel the navigation directly. On the map interface, click 'Exit Navigation'. Alternatively, you can manually turn off the navigation device by pressing and holding the power button for 3 seconds.
18
5
Share

How to use the BMW auto air conditioning function?

It's the AUTO button. In this mode, once a temperature is set, the air conditioning will automatically start when the vehicle is ignited. You can see two fan symbols on the air conditioning control panel. If you want to manually turn on the air conditioning, simply press the increase fan speed button.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.