What is the fuel tank capacity of the Tiggo 3x?

1 Answers
LeilaMarie
07/29/25 11:33pm
There are 16 models of the 2022 Tiggo 3x, all with a fuel tank capacity of 48L. The vehicles are equipped with a 1.5L naturally aspirated engine and feature front-wheel drive. In the same class, the 2020 Karry K60 has a fuel tank capacity of 45L. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity. Fuel tank maintenance includes the following: Drain accumulated water and sediment from the tank, and check for any leaks at fuel pipe joints and switches. For fuel tank caps equipped with air and vapor valves, ensure the vent holes are clear. The fuel filler inlet filter should remain intact to prevent impurities from entering the tank and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling while driving.
Was this review help?
17
3
Share
More Forum Discussions

What car is the PUBG Coupe based on?

The Bony Coupe model was designed by the automotive master Giorgetto Giugiaro and made its debut at the 1974 Turin Motor Show. Here are the detailed specifications of the Coupe: 1. System: The Bony Coupe is equipped with a full-time four-wheel drive (AWD) system, which ensures maximum traction and high-speed performance even on rough terrain. The Coupe features a 2+2 seating arrangement, accommodating up to four passengers. However, players seated in the rear (seats 3 and 4) will not be able to shoot. 2. Configuration: The vehicle has 1000 HP. Its maximum speed is 150 km/h when driving.
13
5
Share

Why is it difficult to shift gears in an automatic transmission?

There are mainly three reasons for difficulty in shifting gears in an automatic transmission: 1. Operational factors: Incorrect operation by the driver, where the speed does not match the gear, leading to difficulty in shifting. This can be resolved as the driver gains experience and becomes more proficient. 2. Clutch factors: Rust on the transmission's primary shaft can prevent the clutch driven disc from moving properly, resulting in poor return and difficulty in engaging gears along the normal path. 3. Transmission factors: Old transmission fluid needs to be replaced. If not replaced in time, its lubrication effectiveness decreases, making gear shifting more strenuous.
19
4
Share

What causes the C4L to indicate an engine fault?

C4L indicating an engine fault may be caused by spark plug carbon deposits, dirty throttle body, leaking fuel injectors, cylinder wear, or oxygen sensor failure. Below is an introduction to the 2019 230THP automatic leading model Citroën C4L: Powertrain: Equipped with a 1.2-liter turbocharged 3-cylinder engine, paired with a 6-speed automatic manual transmission. Body dimensions: Length, width, and height are 4675mm, 1780mm, and 1500mm respectively, with a wheelbase of 2710mm. Chassis: The drivetrain is front-engine, front-wheel drive, with a MacPherson independent front suspension and a torsion beam non-independent rear suspension, featuring a unibody structure.
8
0
Share

How to Properly Use a Homemade Tire Pressure Gauge?

Correct usage measures for homemade tire pressure gauges: 1. Do not exceed the maximum pressure indicated on the dial. 2. Check tire pressure when the weather is hot or cold. 3. For tire valve stems without caps, remove any dirt before use. 4. Inflate to the tire pressure recommended by the tire manufacturer. 5. The accuracy of the tire pressure gauge will be affected if it is dropped or subjected to severe impact. 6. Pressure unit conversion: 1BAR=14.5PSI=1.02KG/CM2 (PSI stands for pounds per square inch). 7. Measure when the tires are cold. 8. Tighten the tire pressure gauge connector onto the tire valve stem until the gauge pointer reaches the highest position.
10
0
Share

What are the functions of the buttons in the Sylphy?

Here are the introductions to the functions of the buttons in the Sylphy: Electronic Stability System: It can effectively prevent the vehicle from skidding, fishtailing, or other loss of control situations. Parking Radar: The central control screen displays images, and the radar will sound an alarm when obstacles are detected. Auto Start-Stop: This function allows the engine to temporarily shut off. The vehicle will restart when the driver's foot leaves the brake pedal. Temperature Zone Synchronization: When this function is turned on, changing the temperature in the driver's zone will synchronize the changes in the other temperature zones. After turning off this function, each zone can be set individually to meet the needs of passengers in different positions.
7
5
Share

Does Land Rover have sedans?

Land Rover currently does not produce sedan models. The brand primarily focuses on luxury all-terrain SUV series, which are well-known for their SUV lineup and robust off-road capabilities. Below are the specifications of the 2022 Land Rover Defender 90 3.0T-P400XS: Body dimensions: Length x Width x Height are 4583mm, 2008mm, and 1969mm respectively, with a wheelbase of 2580mm. Chassis: The drivetrain features front-engine four-wheel drive, with a front suspension of double-wishbone independent suspension and a rear suspension of multi-link independent suspension, built on a unibody structure.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.