What is the fuel tank capacity of the Teana in liters?

1 Answers
LeQuinn
07/30/25 7:48am
The fuel tank capacity of the Teana is 61.3 liters, which is the officially announced data. Owners who have purchased this model can also check this information on the vehicle's configuration sheet. The Teana 2.0T model requires 95-octane fuel, while the 2.0L model uses 92-octane fuel. The fuel consumption per 100 kilometers ranges from 5.9 to 6.7 liters. A full tank of fuel can cover a distance of 915 to 1039 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
Was this review help?
15
0
Share
More Forum Discussions

What is the solution for BMW 5 Series engine oil leakage?

Older vehicles are more prone to such incidents and require replacement of the valve cover gasket. If the sealing gasket has aged, it is necessary to remove the oil pan, replace the oil pan gasket, and reapply sealant. The drain screw washer provides a certain sealing function and should preferably be replaced regularly according to the maintenance cycle. Remove the engine timing cover and reapply adhesive.
7
0
Share

How to Determine if Engine Oil is Too Thin

When checking engine oil regularly, if you want to more accurately determine whether the oil is burning, it's best to do so when the engine is cold. After driving, let the car sit for a while so the oil can gradually return to the oil pan. Checking the oil level at this time will be more accurate. The initial oil level reading on the dipstick when first pulled out is not accurate. Wipe it clean, reinsert the dipstick for two to three seconds, then pull it out again for a proper reading.
19
0
Share

How to Deal with Dents in Car Sheet Metal?

Dents in car sheet metal can be effectively addressed using the currently popular paintless dent repair (PDR) method. Below are the current dent repair methods: 1. Paintless Dent Repair (PDR): Unlike traditional repair methods, if the vehicle's dent hasn't damaged the paint, PDR leaves almost no trace after completion, making it an excellent option. 2. Traditional Body Repair: When dents occur in the vehicle's sheet metal, traditional body repair can be used. After repair, repainting is necessary, and the painted area should be slightly larger to avoid color discrepancies between the new paint and the original factory paint, as there may be some color difference.
18
4
Share

How to remove the rear door window pin of a Passat?

First, prepare all the tools required for the entire process of removing the Passat's door window. Start by gently lifting from one end with your hand, then gradually remove the outer trim strip. Avoid applying excessive force, as it can easily deform the trim. Normally, a gentle upward lift with your hand is sufficient to remove it. If it's too tight, use a flathead screwdriver to gently pry from the edge. Turn on the Passat's ignition, then press and hold the window regulator button for the door whose glass needs to be removed, lowering the window to the appropriate position.
9
2
Share

How to Install the Belt on Baojun 560?

First, align the timing marks on the crankshaft timing gear and the camshaft timing gear. Pay attention to the front and back of the crankshaft gear's baffle to avoid installing it incorrectly. Install the tensioner pulley first, but do not tighten the fixing screw yet. Attach the timing belt, ensuring the belt on the left side is taut and the teeth are aligned. At this point, the tensioner pulley spring should be properly positioned. Finally, tighten the tensioner pulley's fixing screw and then reinstall the remaining components.
4
5
Share

What are the inspection standards for car headlights?

Here is a detailed introduction to the inspection standards for car headlights: 1. Color temperature requirement: The color temperature must not exceed 6000K. If it exceeds 6000K, the value cannot be detected during inspection, and the vehicle will fail the annual inspection. 2. No impact on other road users: According to the regulations in the Road Traffic Safety Law, vehicle operation must not affect other road traffic participants. The light emitted from the headlights must not disturb others. When modifying headlights, integrated headlights should be installed. 3. Brightness requirement: The brightness must not be too low. The illumination of the low beam must be above 1200 lumens.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.